wath i needed files ?
the firmware ESP_Easy_mega-20200222_test_ESP32_4M316k.bin is't include ?:
boot_app0.bin
bootloader.bin
ESPEasy.ino.partitions.bin

Hello! please tell me, I can’t understand how to flash esp32 to the latest firmware ESPEasy_mega-20200222 but i can flashing ESPEasy32_R20100-and it's ok, what should i do to flash ? I also tried to flash through flash_download_tools indicating memory address 0x00 but not worked. Did anyone flash es...

that is, you to save battery consumption and to the port of ADS it is better to use high-resistance resistors

wheen i upgrade firmware from vcc to dev analog input show me current voltage.

i change resistor from 5k to 8.3K
and 5K to 26.7
in pin ADC i have 0.945V but in devices Analog value is -1.00

i use naked ESP8266
chem i attachment
most likely you are right, I need to replace 10K at 20K

Hello! i want to measure the voltage level on the battery connected as follows to the pin, the ADC connected the output from the battery (where the plus was output through the 10K resistor and minus through the 5K resistor), then all these resistors are connected in one and the output is connected t...

Hello i use sonoff pow ver2.0 in this version amper sensor is CSE7759, but in firmware ESP_Easy_mega-20180524_dev_ESP8266_4096 inly 7766 and 7759 not worked, but sonoff pow ver2.0(CSE7759) work with firmware ESP_Easy_mega-20180524_hard_SONOFF_POW I understand so much the difference between HWL and C...