I've not been able to fix this problem, even replaced the pulsecounter, still every lap is counted double...

Is it possible to average the last 2 measured values with rules? This way i could calculate the correct time it takes for one lap.

If your meter is 150 turns per hour per KW your calculation is correct! try it out it works perfect. Ive doublechecked it with a powermeter and by connecting a 400W light to the net. powermeter gave me 413W, my calculation 407W... The difference is probably a measuring error in the powermeter. Te b...

If your meter is 150 turns per hour per KW your calculation is correct! try it out it works perfect. Ive doublechecked it with a powermeter and by connecting a 400W light to the net. powermeter gave me 413W, my calculation 407W... The difference is probably a measuring error in the powermeter. Te be...

The picture is just an example. took it from google

Yes I am using D0. I've tried the last stable 2.0 (ESPEasy_v2.0-20180322), the MEGA release (ESPEasy_mega-20180522) and the R120. The first to have the rising and falling options but same behaviore, double counts. The r120 does not have the falling/rising options, and also counts double. i've even ...

Yes I am using D0. I've tried the last stable 2.0 (ESPEasy_v2.0-20180322), the MEGA release (ESPEasy_mega-20180522) and the R120. The first to have the rising and falling options but same behaviore, double counts. The r120 does not have the falling/rising options, and also counts double. i've even t...

Are you sure you're "looking" at the black reflection on the disc and not picking up a reflection of the nut on top of it at the axis? Where have you put the resistor? Between the GND and Emitter or between Vcc and the Collector? You may want to try the other way. Just to make sure the ch...

I have the formula to calculate to watts, thats not the problem. My meter gives me 2 time values, one long (the silver part of the rotating disk) and one short (black part of the rotating disk) Multiplying the last value does not help me… I need the last 2 measurements added up or an avarage of the ...

Yes i could, but i want to use TIME to calculate the live usage.... when i disable the delay it registers one long time and one short time.. this is not usable..

Is it possible to add up the last two measurements with rules?

Hi, I'm currently trying to measure my house power usage with a pulse counter with a TCRT5000 sensor. All is working well accept for one thing. The power meter has a rotating silver disk with a little (2cm) black piece. The pulse counter counts this black part 2 times. Once on the beginning and once...