Helo,

thanks for answer.

I will use ESP01 with mcp23017, i hope this have more speed and works with PWM. (Dimming)
Or funktional it on ESP32 good?

Thanks

Hello, yes, the bad functioität the pin control I can confirm again. Some pins can not be set to 0 via PWM and GPIO. If you set the pins to 0 by rules when starting, then there are sporadically other pins that can not be set to 0. These pins they can not go but put on PWM 1. But it's easy for consum...

Thanks for the answer.

It's about ESP32.
He has a lot more pins, so 16 and 17 not normal with PWM usable?

Thank you

Hello, I have 1 problem with GPIO 17 and GPIO 16 found. When switching on the ESP you can switch off the outputs with PWM with rules. PWM, 16,0 Later, however, if you use the pin you can take any value but not zero. There is an answer from ESP but it will not be executed. Let's say GPIO 16 was at 50...

Hello, that would be great! Had used only for the lighting arduino, since switching worked in ms range. Unfortunately EspEasy does not yet do that, waiting for a command to finish. I'm curious how EspEasy32 is developing, this chip has so much potential! Had thought even before first to look at the ...

Hello, Thank you for the effort. Looks better. Will it later work like that when just a pin is at its blot when new command on mqtt comes in. that the previous ferb is aborted? So similar:? /* * hell -> LED aus, PIR ohne Funktion * dunkel - innerhalb Zeitspanne -> LED = Helligkeit von Wert des LDR, ...

oh thanks, its not good.

Helo, Try on as 4 pin's at the same time. I have not found a way. I send via MQTT 4 commands e.g. PWM, 23,1023,1000 and so on. Unfortunately, the ESP32 waits until the dimming is completed, then only the new pin is controlled. And so on. The web interface is the same, only when the dimming is finish...

Helo,

i know.
input works, output PWM dont.

Thanks,

ok on this picture i see PWM output:



or you mine not work on espeasy? Pir´s works on this pins.

Hello, sorry it is GPIO 35,34,39 and 36. And this Bord is: https://www.ebay.de/itm/2-in-1-Wifi-Bluetooth-ESP32-WLAN-Dev-Board-Programmierung-fur-Entwicklung/142756007724?_trkparms=aid%3D555017%26algo%3DPL.CASSINI%26ao%3D1%26asc%3D43785%26meid%3Dfff0b0b8eb0347b3a70ff2f2381aecf2%26pid%3D100505%26rk%3D...

Helo,

why i can not use pin 35,34,39 and 36 for PWM?

Thanks

Hello,

Is it possible to change the name of MQTT to rename the pins?

For example, pin 15 to make that 154.
(PWM, 154,0,1000)

I have here script NEN where several ESP's sign up, not clean runs.

Would it be possible?

Thank you

Helo, Here you can see on the pictures when the PIR triggers and another for comparison. https://picload.org/view/docpwplr/pir1.png.html https://picload.org/view/docpwplw/pir2.png.html intensity is about the same for both and not even in the middle. As you can see in the first one, everything went g...

Helo, I use espeasy32 for my home control. Under motion detector, but these give me sporadically signals from although no movement has taken place. Do you have an idea why this may be? Cable length is about 4 meters, although other sensors depend on 7 meters of cable and there are not so many false ...

Helo,

i testet with PWM und this work fine!

on System#Boot do
PWM,4,0
PWM,5,0
PWM,15,0
PWM,2,0
PWM,16,0
PWM,17,0
endon

Very nice, espeasy its very cool!!! Thanks!

Helo,

thanks for the answer.

I use dont timer, this is example. I testet it:

on System#Boot do
GPIO,15,0
GPIO,2,0
GPIO,4,0 // Dont work
GPIO,16,0
GPIO,17,0
GPIO,5,0 // Dont work
endon

GPIO 4 and 5 dont work to OFF on boot, with sent on command its works.

Thanks

Helo,

im search for the rules and find this:

on System#Boot do
GPIO,2,1
timerSet,1,30
endon

For that is : timerSet,1,30 ?

For more Pin´s its so ok.?

on System#Boot do
GPIO,1,1
GPIO,2,1
GPIO,3,1
timerSet,1,30
endon

Thanks

Hello, I'm new to the forum and bicn not so good in progrmmieren. But use EspEasy32 for my home control to, for example, LED Strips or Pirs to drive and read. This is very good about MQTT, I am very satisfied with it! Thank you also to the great functionality of the EspEasy! I would be very happy ab...