Search found 7 matches

by pa3gmi
04 Feb 2020, 12:32
Forum: ESP Easy: Hardware
Topic: SONOFF MINI
Replies: 32
Views: 67775

Re: SONOFF MINI

I finally gave up with the OTA update. I soldered the cables and uploaded the firmware using an external programmer (ESP_Easy_mega-20191208_normal_ESP8285_1M). Hi, now I have used the ESP Easy Flasher with the ESP_Easy_mega-20191208_normal_ESP8285_1M file in combination with the module seen here (h...
by pa3gmi
20 Jun 2018, 13:51
Forum: ESP Easy: Hardware
Topic: SonOff POW R2 support
Replies: 83
Views: 95318

Re: SonOff POW R2 support

Hi, I have put theESP_Easy_mega-20180615_hard_SONOFF_POW.bin in the device and now it works, no idea what was the problem. Thanks for all the help, I keep an eye on this site the teller is of course most interesting. I see that the voltage measuring is about 10 volt to low, is there a way to correct...
by pa3gmi
20 Jun 2018, 13:08
Forum: ESP Easy: Hardware
Topic: SonOff POW R2 support
Replies: 83
Views: 95318

Re: SonOff POW R2 support

Hi is it possible that i have not the right POW version on the print is Ver 2.0 the measuring chip is HLW8012
With your configuration I have now no readings at all, so the measuring circuit seems not working.

Rien
by pa3gmi
20 Jun 2018, 11:47
Forum: ESP Easy: Hardware
Topic: SonOff POW R2 support
Replies: 83
Views: 95318

Re: SonOff POW R2 support

What do you mean with "the CSE"

Thanks anyway for the fast response.
by pa3gmi
20 Jun 2018, 09:13
Forum: ESP Easy: Hardware
Topic: SonOff POW R2 support
Replies: 83
Views: 95318

Re: SonOff POW R2 support

Hi, I have found some things that where wrong (the blue circle helps)and make them ok, now I see in Domoticz that there is contact to the ESP device my sensors are updated. But still only the voltage is coming in here. This is the software version I have: The POW print is ver 2 Build 20102 - Mega Li...
by pa3gmi
19 Jun 2018, 18:56
Forum: ESP Easy: Hardware
Topic: SonOff POW R2 support
Replies: 83
Views: 95318

Re: SonOff POW R2 support

Thanks for answer, I have done as you say, but until now I can get only the Voltage readout. Is this script also sensitive for the name of the unit or somewhat else? I have fill in my Domoticz IP and port address and made 3 virtual sensors note the IDX and fill in on the right place, what else can o...
by pa3gmi
18 Jun 2018, 14:42
Forum: ESP Easy: Hardware
Topic: SonOff POW R2 support
Replies: 83
Views: 95318

Re: SonOff POW R2 support

Hi, I have the sonoff Pow and did a flasch with ESP_Easy_mega-20180524_hard_SONOFF_POW.bin. I can see the values on the device direct, but only the voltage in Domoticz, I do not understand the way to see all the values, here mentioned by Prutsium, please will You tell me more about that. I am not a ...