Search found 7 matches
- 29 Sep 2018, 11:06
- Forum: ESP Easy: Projects / Applications
- Topic: ESP easy+nodemcu+HC-SR501 problem
- Replies: 22
- Views: 16641
Re: ESP easy+nodemcu+HC-SR501 problem
nothing to do probably the sensor model has problems .. I will try to change the manufacturer ..
- 28 Jul 2018, 20:13
- Forum: ESP Easy: Projects / Applications
- Topic: ESP easy+nodemcu+HC-SR501 problem
- Replies: 22
- Views: 16641
Re: ESP easy+nodemcu+HC-SR501 problem
nothing to do, I inserted a 10k resistor between the GPIO and the sensor data output but I continue to have fakes, it goes continuously between the two states
- 11 Jul 2018, 16:24
- Forum: ESP Easy: Projects / Applications
- Topic: ESP easy+nodemcu+HC-SR501 problem
- Replies: 22
- Views: 16641
Re: ESP easy+nodemcu+HC-SR501 problem
Now it seems to work (at least now I see it on HA). I connected the pir sensor to the vin pin of nodeMCU and then gnd and GPIO10. the problem now is that it continues to detect movement even if it is not there. passes continuously from 0 to 1. I tried to rotate the trimmers but nothing.
- 02 Jul 2018, 16:12
- Forum: ESP Easy: Projects / Applications
- Topic: ESP easy+nodemcu+HC-SR501 problem
- Replies: 22
- Views: 16641
Re: ESP easy+nodemcu+HC-SR501 problem
So you want to say that to see if it works correctly I can do it from the frontend of Home Assistant (in my case) and not from the web page of ESP easy? did I get it right?. I tried various ways of power, since my nodemcu card does not have a 5V output pin I tried to power the sensor with 3.3V, thro...
- 01 Jul 2018, 20:24
- Forum: ESP Easy: Projects / Applications
- Topic: ESP easy+nodemcu+HC-SR501 problem
- Replies: 22
- Views: 16641
- 01 Jul 2018, 20:18
- Forum: ESP Easy: Projects / Applications
- Topic: ESP easy+nodemcu+HC-SR501 problem
- Replies: 22
- Views: 16641
Re: ESP easy+nodemcu+HC-SR501 problem
this is my sensor PIR: HC-SR501
- 01 Jul 2018, 16:54
- Forum: ESP Easy: Projects / Applications
- Topic: ESP easy+nodemcu+HC-SR501 problem
- Replies: 22
- Views: 16641
ESP easy+nodemcu+HC-SR501 problem
Goodmorning everyone. I have a problem with the PIR motion sensor. I connected it to the nodemcu with ESP easy mega firmware (ESP_Easy_mega-20180624_normal_ESP8266_4096) by following the instructions here (https://www.letscontrolit.com/wiki/index.php/PIR_Sensor), but on the module page it always giv...