hello, i have also the same problem after input admin and password und select rules. Rules1 is selctable, but if i select rules2 the espeasy ask for user and password. So i am not able to select other rules. If i remove the password and save this setting, after that i am able to select all rules. I ...

now i find out the reason why LongPuls,2,0.5 does not work on higher releases than ESP_Easy_mega-20180625_normal_ESP8266_4096.bin. on release ESP_Easy_mega-20180625_normal_ESP8266_4096.bin you must not define an Device under Devices for gpio2. After release ESP_Easy_mega-20180625_normal_ESP8266_4096...

Hello , the last correct running version is ESP_Easy_mega-20180625_normal_ESP8266_4096.bin
From version ESP_Easy_mega-20180708_normal_ESP8266_4096.bin the command longpulse,x,y,z
does not work correcly. The port x does not switch off after z seconds.

regards

khbraemer

Hello. i check the releases back. from release ESP_Easy_mega-20180708_normal_ESP8266_4096 on, i see this problem with longpulse. In the LOG i see always: 11221404: WD : Uptime 187 ConnectFailures 0 FreeMem 17552 11251405: LoopStats: shortestLoop: 42 longestLoop: 884639 avgLoopDuration: 71.28 systemT...

Hallo, i have a Problem with the command LongPulse,02,0,5 on ESPEasy Release mega-20180714. This command switched ON the WIFI Led on the ESP8266-12. The LED goes on, but switched not off after 5 seconds. On other ports i see the same Problem. On Release ESPEasy mega-20180522 this command Works fine....