Search found 87 matches

by dampa
10 Jul 2022, 12:43
Forum: ESP Easy: Software
Topic: Git build for ESPEasy_ESP82xx_mega-20220616 shows 'HEAD_56d3225' ??
Replies: 3
Views: 2727

Git build for ESPEasy_ESP82xx_mega-20220616 shows 'HEAD_56d3225' ??

I noticed that the Git build for ESPEasy_ESP82xx_mega-20220616 shows 'HEAD_56d3225' in the json file and on the 'System Info' screen while prior releases showed something like 'mega-20211224_f162ebf'. I use this to identify what release a device is using and in a Node-RED flow I've created to do bac...
by dampa
06 Jun 2022, 22:22
Forum: ESP Easy: Hardware
Topic: Display - OLED SSD1306/SH1106 Framed - footer??
Replies: 4
Views: 3846

Re: Display - OLED SSD1306/SH1106 Framed - footer??

The way I read it is that there should be a footer lines like the header lines, with the same options that you can put in the header... or the documentation should be updated to remove the footer part.
by dampa
06 Jun 2022, 19:46
Forum: ESP Easy: Hardware
Topic: Display - OLED SSD1306/SH1106 Framed - footer??
Replies: 4
Views: 3846

Display - OLED SSD1306/SH1106 Framed - footer??

In the documentation for the Display - OLED SSD1306/SH1106 Framed (https://espeasy.readthedocs.io/en/latest/Plugin/P036.html) it says: The plugin allows for a header and footer line, which may show some user selectable information. and while the header line options appear in the 'Content' section, n...
by dampa
28 Jul 2020, 12:14
Forum: ESP Easy: Software
Topic: mega-20200721 oddity - %unixtime% different for power vrs reboot
Replies: 2
Views: 5244

Re: mega-20200721 oddity - %unixtime% different for power vrs reboot

TD-er -Thanks for the explanation -(I messed up with the images but have correct them now) What you say makes sense. I was doing this because someone said they thought the latest release was taking longer to boot so this was just a little test to see if anything showed up. I should have realized tha...
by dampa
27 Jul 2020, 22:23
Forum: ESP Easy: Software
Topic: mega-20200721 oddity - %unixtime% different for power vrs reboot
Replies: 2
Views: 5244

mega-20200721 oddity - %unixtime% different for power vrs reboot

release: ESP_Easy_mega_20200721_normal_ESP8266_4M1M device: WeMoc D1 mini I created a simple test: A controller - Home Assistant (OpenHAB) MQTT - pointing to a broker running on a PiZerow on my locol network Device 1 - a Generic - Dummy Device set with four values: boot1, boot2, boot3 and boot4(unus...
by dampa
20 May 2020, 19:24
Forum: ESP Easy: Software
Topic: mega-20200515 %sysbuild_git% missing
Replies: 3
Views: 6295

Re: mega-20200515 %sysbuild_git% missing

Ahh, i looked thru the release notes after unzipping the file. Now that I go to the down loads oage I do see it there.

I have an automatic download setup so I never actually go to the download page. But I figure it can't hurt to make it known in case it was missed. 8-)
by dampa
18 May 2020, 10:29
Forum: ESP Easy: Software
Topic: mega-20200515 %sysbuild_git% missing
Replies: 3
Views: 6295

mega-20200515 %sysbuild_git% missing

ESP_Easy_mega_20200516_normal_ESP8266_4M1M

%sysbuild_git% is not showing in Tools->System variables->Time
And it doesn't show on the 'Main' tab

also in the `bin` folder there is a xxxx.bin and xxxx.bin.gz for each version
by dampa
03 May 2020, 19:24
Forum: ESP Easy: Software
Topic: Upgrade to 20200426 causes device to hang waking from sleep
Replies: 8
Views: 7510

Re: Upgrade to 20200426 causes device to hang waking from sleep with BMx280 not connected

I don't know what is taking the resources. I have syslog being sent out to a Pi, but after the first deep sleep nothing ever shows on the log even though the WeMos led is flickering. Here is what shows in SYSlog - I have it set to 'info' but could change it if you want. Note there is nothing connect...
by dampa
03 May 2020, 14:31
Forum: ESP Easy: Software
Topic: Upgrade to 20200426 causes device to hang waking from sleep
Replies: 8
Views: 7510

Re: Upgrade to 20200426 causes device to hang waking from sleep with BMx280 not connected

Well I didn't brick the WeMos after all!! The USB cable I was using only has the power lines in it, using another cable I was able to flash it again. So I've narrowed it down to to one dummy device and the below rules. With the 20200310 release it runs fine, with the 20200426 release after the first...
by dampa
03 May 2020, 13:05
Forum: ESP Easy: Software
Topic: Upgrade to 20200426 causes device to hang waking from sleep
Replies: 8
Views: 7510

Re: Upgrade to 20200426 causes device to hang waking from sleep with BMx280 not connected

Ok, I did some more testing and it is NOT related to the BME280 or any of the devices. I deleted all my devices except one generic dummy devices I use to store variables in. I've been stripping out my rules to see if I can narrow it down. I flash with 20200310 to see f it works, then with 20200426 t...
by dampa
02 May 2020, 02:37
Forum: ESP Easy: Software
Topic: Upgrade to 20200426 causes device to hang waking from sleep
Replies: 8
Views: 7510

Re: Upgrade to 20200426 causes device to hang waking from sleep with BMx280 not connected

will do, first thing tomorrow (east coast US) I'm done in right now
by dampa
01 May 2020, 17:31
Forum: ESP Easy: Software
Topic: Upgrade to 20200426 causes device to hang waking from sleep
Replies: 8
Views: 7510

Upgrade to 20200426 causes device to hang waking from sleep

WeMos D1 Mini ESP_Easy_mega-20200310_normal_ESP8266_4M1M ESP_Easy_mega-20200426_normal_ESP8266_4M1M BACKGROUND: I have a set of rules that are working fine with the 20200310 release. On System#boot it disables controller 1 and 2 then checks to see if a dummy device variable (control#coldboot) is a z...
by dampa
23 Apr 2020, 11:27
Forum: ESP Easy: Software
Topic: ESPEasy-20200410 generic - Dummy Device - change to one effects all
Replies: 2
Views: 5302

ESPEasy-20200410 generic - Dummy Device - change to one effects all

Wemos D1 mini ESP_Easy_mega-20200410_normal_ESP8266_4M1M.bin If you have more than one 'Generic - Dummy Device', changing the 'Output Data Type' option on one device changes all other 'Generic - Dummy Devices' For example if you have device 1 with the 'Output Data Type' set to 'Quad', you have four ...
by dampa
20 Apr 2020, 18:50
Forum: ESP Easy: General Discussion
Topic: does system#boot fire when waking from deep sleep?
Replies: 4
Views: 6486

Re: does system#boot fire when waking from deep sleep?

I found a solution! a cold boot (power on) initilizes all variables to 0 while a reboot from the console or a deepsleep preserves the variables so I can work with that. Thanks for responding and a GREAT product! All I need to do is have a variable 'sendmail' and in tthe System#Boot rules say if [myd...
by dampa
20 Apr 2020, 18:07
Forum: ESP Easy: General Discussion
Topic: does system#boot fire when waking from deep sleep?
Replies: 4
Views: 6486

Re: does system#boot fire when waking from deep sleep?

Thanks grovkillen I saw that but it seems System#Wake and System#Boot are effectivaly equilivant. I did some testing and when waking from deepsleep or rebooting/powering on, system#wake runs first then system#boot. Here is how I came to that conclusion. I created 5 rules and a 'Generic - Dummy Devic...
by dampa
20 Apr 2020, 14:00
Forum: ESP Easy: General Discussion
Topic: does system#boot fire when waking from deep sleep?
Replies: 4
Views: 6486

does system#boot fire when waking from deep sleep?

Memos D1 Mini - ESP_Easy_mega-20200410_normal_ESP8266_4M1M Should system#boot be triggered when waking from deepsleep? I would think that system#wake would be triggered but tht system#boot would only happen at a power on or a reboot being issued. I have some code that sets a variable to 1 in a 'on s...
by dampa
15 Apr 2020, 14:00
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 can't change rule sets
Replies: 21
Views: 13905

Re: ESPEasy-20200328 can't change rule sets

This looks all fixed in mega-20200410 : :D
by dampa
13 Apr 2020, 15:59
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 can't change rule sets
Replies: 21
Views: 13905

Re: ESPEasy-20200328 can't change rule sets

Beebotte doesn't use a passwoord, you put a token in the 'Controller User' In comparing the webpage in the 20200310 vrs the 20200328-15-PR_2972 I see the new Use Extended Credentials: Controller Client ID: Unique Client ID on Reconnect: Current Client ID: Publish Retain Flag: are any of them now req...
by dampa
13 Apr 2020, 12:53
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 can't change rule sets
Replies: 21
Views: 13905

Re: ESPEasy-20200328 can't change rule sets

With mqtt.beebotte.com you must pass a token in the Controller User. I'm using the Home Assistant (openHAB) MQTT Edit: I swapped to Domoticz and now see a msg in the log 160779: MQTT : IDX cannot be zero! once I swapped back to the 20200310 version it started working again...patially. I still see th...
by dampa
13 Apr 2020, 11:42
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 can't change rule sets
Replies: 21
Views: 13905

Re: ESPEasy-20200328 can't change rule sets

Using ESP_Easy_mega-20200310_normal_ESP8266_4M1M.bin Setup Controller 1 as a local network MQTT controller Setup Controller 2 to use mqtt.beebotte.com If I enable controller 1 and disable controller 2 it works - - C1 - - || - - C2 - - enabled || disabled - C1 works disabled || enabled - C2 works fla...
by dampa
07 Apr 2020, 18:46
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 can't change rule sets
Replies: 21
Views: 13905

Re: ESPEasy-20200328 can't change rule sets

found two more things
minor - in System Variables - %iv4% shows up twice and %ip% is missing

major - controler 2 is not working - I went back to the 20200310 version and it worked fine
by dampa
03 Apr 2020, 10:41
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 can't change rule sets
Replies: 21
Views: 13905

Re: ESPEasy-20200328 can't change rule sets

- Main tab - Git build value missing also missing in JSON (probably for the same reason)

haven't noticed anything else obvious (smile)

interestingly the rules full screen crop down going to the bottom is the same in mega-20200305
by dampa
03 Apr 2020, 10:10
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 can't change rule sets
Replies: 21
Views: 13905

Re: ESPEasy-20200328 can't change rule sets

I can confirm it works and like Dave in full screen mode, the drop-down appears to the right at the bottom. It does use a 'bit' of space though. This release also fixes the '%sysbuild_filename% misingString' issue https://www.letscontrolit.com/forum/viewtopic.php?f=6&t=7574 I did notice that as ...
by dampa
03 Apr 2020, 09:39
Forum: ESP Easy: Software
Topic: D1 Mini strange WiFi behaviour
Replies: 22
Views: 16489

Re: D1 Mini strange WiFi behaviour

How about setting the IP address in the router based on the MAC address of the D1 and increasing the wake time?
by dampa
01 Apr 2020, 21:11
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 can't change rule sets
Replies: 21
Views: 13905

Re: ESPEasy-20200328 can't change rule sets

I've just dropped back to 20200310
by dampa
01 Apr 2020, 13:49
Forum: ESP Easy: Software
Topic: D1 Mini strange WiFi behaviour
Replies: 22
Views: 16489

Re: D1 Mini strange WiFi behaviour

@JohanE - Do you have Config->Sleep mode->Sleep on connection failure checked off?
What are the other settings there?

I have rules sending the WeMos into deepsleep with no problems when waking up.
by dampa
01 Apr 2020, 13:04
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 can't change rule sets
Replies: 21
Views: 13905

ESPEasy-20200328 can't change rule sets

Device: Wemos D1 mini pro
Build: ESP_Easy_mega-20200328_normal_ESP8266_4M1M.bin
Location: Rules

There does not seem to be a way to swap between rule sets. If you use the selection list (now at the bottom of the screen) nothing happens - it stays on Rule Set 1
by dampa
01 Apr 2020, 11:46
Forum: ESP Easy: Software
Topic: ESPEasy-20200328 %sysbuild_filename% MissingString
Replies: 3
Views: 4614

ESPEasy-20200328 %sysbuild_filename% MissingString

Device: Wemos D1 mini pro
Build: ESP_Easy_mega-20200328_normal_ESP8266_4M1M.bin
Location: Tools -> System Variables

The System Variable %sysbuild_filename% is showing MissingString
by dampa
17 Mar 2020, 22:23
Forum: ESP Easy: General Discussion
Topic: Switch MQTT controlers??
Replies: 9
Views: 6866

Re: Switch MQTT controlers??

If you have primary and secondary set, you also have different SSID's, and there is the %ssid% variable. Also there is an event when you are connected to WiFi, so in that block you can compare the %ssid% value. Only thing is that currently the string matching is a bit limited, but another recent ad...
by dampa
17 Mar 2020, 20:59
Forum: ESP Easy: General Discussion
Topic: Switch MQTT controlers??
Replies: 9
Views: 6866

Re: Switch MQTT controlers??

Thomas, I don't think that would work since (if I understand it) in rules you can not do a compare to a string, and %bssid% is 50:C7:BF:78:4F:7B. If you could use a string in a rule I could just use if %ssid% = "My hidden SSID" do but that doesn't work (I tried it) But my idea in my previo...
by dampa
17 Mar 2020, 20:14
Forum: ESP Easy: General Discussion
Topic: Switch MQTT controlers??
Replies: 9
Views: 6866

Re: Switch MQTT controlers??

well I can get it to work using %ip4% since that is a value on System#Boot do ControllerDisable,1 ControllerDisable,2 endon on WiFi#Connected do if %ip4% = 28 do ControllerEnable,1 else ControllerEnable,2 endif endon so If I set my home network to assign the IP based on the device's MAC address the ...
by dampa
17 Mar 2020, 19:53
Forum: ESP Easy: General Discussion
Topic: Switch MQTT controlers??
Replies: 9
Views: 6866

Re: Switch MQTT controlers??

SWEET!!! that works! now to see if I can check the SSID and set it.
by dampa
17 Mar 2020, 18:11
Forum: ESP Easy: General Discussion
Topic: Switch MQTT controlers??
Replies: 9
Views: 6866

Switch MQTT controlers??

Is there any way in rules to deactivate/activate MQTT controllers? Here is what I want to do. Have a device setup with two SSID's to connect to. Depending on the SSID, I want to activate the MQTT-1 controller or the MQTT-2 controller. The MQTT-1 controller would be in my local network, but MQTT-2 wo...
by dampa
08 Mar 2020, 22:10
Forum: ESP Easy: General Discussion
Topic: Publish not working anymore
Replies: 31
Views: 28421

Re: Publish not working anymore

Ahh sure AFTER I test and write it up, I find out 'TD-er' is all over this (see https://github.com/letscontrolit/ESPEas ... 8d7c84588f)
by dampa
08 Mar 2020, 21:49
Forum: ESP Easy: General Discussion
Topic: Publish not working anymore
Replies: 31
Views: 28421

Re: Publish not working anymore

In release mega-20200305 this is not working as I would expect. I have this rule set for testing: on testMQTT do publish node10/debug,"well look at that, it does work" publish node10/debug,'{msg0}' publish node10/debug,'{"msg1":"well look at that","msg2":"...
by dampa
06 Mar 2020, 13:57
Forum: ESP Easy: General Discussion
Topic: Generic - Dummy Device only allows 1 variable in newest releases
Replies: 4
Views: 6090

Re: Generic - Dummy Device only allows 1 variable in newest releases

The good news is that saving the config.dat and reloading it in the current release (config_node42_U42_Build20104_202008.dat) works correctly.
by dampa
06 Mar 2020, 13:44
Forum: ESP Easy: General Discussion
Topic: Generic - Dummy Device only allows 1 variable in newest releases
Replies: 4
Views: 6090

Re: Generic - Dummy Device only allows 1 variable in newest releases

Ahh yes it did, but then the bug must be that the config.dat I imported did not set it to QUAD. On this device I: 1) saved the settings 2) flashed it to blank.bin 3) flashed it to mega-20020303 and setup wifi to my network/reboot 4) imported the config.dat file at this point all 4 variables are ther...
by dampa
06 Mar 2020, 13:17
Forum: ESP Easy: General Discussion
Topic: Generic - Dummy Device only allows 1 variable in newest releases
Replies: 4
Views: 6090

Generic - Dummy Device only allows 1 variable in newest releases

I have a device with a Generic - Dummy Device where I had setup 4 variables. I upgraded to ESP_Easy_mega-20200222_normal_ESP8266_4M1M.bin and then went in and changed the name of one of my four variables.

As soon as I hit save, three of the variables disappear from the values list!


Yikes!
by dampa
04 Mar 2020, 22:24
Forum: ESP Easy: General Discussion
Topic: [Solved] Device: Generic - System Info - Vcc always -1
Replies: 2
Views: 5814

Re: Device: Generic sysingo - Vcc always -1

Thanks Thomas! Other than the fact the OTA update hosed the WeMos and I had to flash it to a blank.bin then couldn't figure why I couldn't get into it (Duh blank.bin!!) Once I flashed it with the VCC version and was able to reload my settings (Yea! I did something right by backing them up before sta...
by dampa
04 Mar 2020, 17:09
Forum: ESP Easy: General Discussion
Topic: [Solved] Device: Generic - System Info - Vcc always -1
Replies: 2
Views: 5814

[Solved] Device: Generic - System Info - Vcc always -1

Hardware: WeMos D1 pro ESPeasy version: mega-20200222 Device: Generic - System Info If I select 'Input VCC' as one of the options, it always returns -1. Taking a dive into the code, I see in _P026_Sysinfo.ino starting at line 198 case 3: { # if FEATURE_ADC_VCC value = vcc; # else // if FEATURE_ADC_V...
by dampa
27 Feb 2020, 12:33
Forum: ESP Easy: Software
Topic: Nested If constructs
Replies: 7
Views: 8265

Re: Nested If constructs

If they parse the same way, there won't be any difference. If they do parse differently you, in the nested case if the ledcolour#code was 0 you would only evaluate one if statement while in the non nested case all four if will always be evaluated. however, if ledcolour#code = 3 the in both cases all...
by dampa
09 Feb 2020, 11:54
Forum: ESP Easy: Hardware
Topic: Display - OLED SSD1306 - no display at all
Replies: 9
Views: 14316

Re: Display - OLED SSD1306 - no display at all

As to why, beats me I was just offering an idea to test :D
by dampa
08 Feb 2020, 17:22
Forum: ESP Easy: Hardware
Topic: Display - OLED SSD1306 <<< layout problem
Replies: 1
Views: 7631

Re: Display - OLED SSD1306 <<< layout problem

The issue is that when you write out data, it looks like it is writing a full 'page' (or line) into the memory buffer. Since a page is 16 bytes, it writes the 16 bytes starting at the offset and this cause the following 'page' of the buffer to be overwritten. It seems to me that when offset is great...
by dampa
08 Feb 2020, 17:18
Forum: ESP Easy: Hardware
Topic: Display - OLED SSD1306 - no display at all
Replies: 9
Views: 14316

Re: Display - OLED SSD1306 - no display at all

have you tried using the 'Display - OLED SSD1306' instead of the 'Display - OLED SSD1306/SH1106 Framed' as the device?
by dampa
10 Nov 2019, 01:02
Forum: ESP Easy: General Discussion
Topic: Docup...maybe? command reference servo mqtt example
Replies: 1
Views: 5016

Docup...maybe? command reference servo mqtt example

If you go to https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference and scroll down to the 'servo' command, the example is Example for MQTT: <MQTT subscribe template>/cmd Servo 1 0 120 shouldn't it be showing the commas between the payload values like Example for MQTT: The topic shou...
by dampa
24 Aug 2019, 12:49
Forum: ESP Easy: General Discussion
Topic: DOCUP - pubsubclient README.md
Replies: 3
Views: 8134

DOCUP - pubsubclient README.md

I happened to trad the README.md and saw this line The maximum message size, including header, is **128 bytes** by default. This is configurable via `MQTT_MAX_PACKET_SIZE` in `PubSubClient.h`. but I looked at one of the messages I was sending it was 269 bytes long (??) so I went and looked into PubS...
by dampa
15 Aug 2019, 15:40
Forum: ESP Easy: Hardware
Topic: How to make Dew point show on display with sensor BME280?
Replies: 11
Views: 11931

Re: How to make Dew point show on display with sensor BME280?

I just spotted the dew point in the log too. I would also like to see it as an other value for the device.