Okay sounds like you should be able to do that via rules and dummy's. if you could give me a hint how I can change the value for "Set Level:" within the PlugIn "Level Control" from "outside", then I can try that. Should this also work with "TaskValueSet"? Or ...

So you want to output the temperature difference between two temp sensors? Example: Temperature1 = 15 degrees Temperature2 = 40 degrees TempDiff = Temperature2 - Temperature1 = 40 - 15 = 25 degrees Is this you idea? If it is you can do it in multiple ways... one way is to do it using formulas as TD...

I think I got it. ;) You mean probably https://www.letscontrolit.com/wiki/index.php/LevelControl and set the target value via "Set Level:", right? Variable target values, i.e. the measured values of another sensor as target value, obviously cannot be entered. (see screenshot; it's cuted, l...

TD-er wrote: ↑27 Aug 2018, 00:04 You could try if [name#value] syntax also works in the formula bar of the plugin.

I'm sorry, but apparently I didn't quite understand the hint.

Which plugin is meant or how may I understand "formula bar" in this context?

/FJ

Hi folks! Current state: Idea Digital differential temperature controller with ESP Easy on Sonoff devices If this is possible, the digital temperature controller should be used as differential thermostat. The plan is to configure the differential temperature controller for a heating system with two ...

Understood, thank you very much.

/FJ

Thanks, so if I use one of the upcoming ESP builds I shouldn't have this problem with ThingSpeak anymore, right?

/FJK

thank you ... I changed to IP ... I set the "ThingHTTP Name:" to label set for the data field on ThingSpeak, but if this relevant at all, I don't know

meanwhile I see some data, but receiving quite a lot of ThingSpeak related errors :

=> Timeout while reading input data!

/FJ

Dear folks! Admittedly I am a total beginner both in ESPeasy and ThingSpeak. Under certain circumstances my problem can be easily solved with a simple tip. ;) It is simply unclear to me what I have to enter under "ThingHTTP Name:". This parameter is not mentioned in the official "Easy...