Search found 21 matches
- 26 Feb 2019, 05:35
- Forum: ESP Easy: Software
- Topic: Reboot inside rules?
- Replies: 74
- Views: 53202
Re: Reboot inside rules?
yes, that correct and understandable, but is not possible to create a very small update (like 2 step OTA) to: 1) in one step substitute the current fw installed (espmega) with the smollest one (it will be only a bridge) 2) in second step substitute the little fw bridge installed with update 1mb new...
- 12 Feb 2019, 23:51
- Forum: ESP Easy: Software
- Topic: ESP_Easy_mega-minimal_ESP8266_1024_OTA
- Replies: 6
- Views: 6361
Re: ESP_Easy_mega-minimal_ESP8266_1024_OTA
For instance I don't use NTP in my modules, so I have commented out all related code:FourIdGeek wrote: ↑12 Feb 2019, 17:32 You said "It's easy to reduce the size to 600k.", could you provide some detail?
- look at TimeESPeasy.ino
- comment everything in getNtpTime
The gain is 10336 bytes for me,
Mc/
- 12 Feb 2019, 07:58
- Forum: ESP Easy: Software
- Topic: ESP_Easy_mega-minimal_ESP8266_1024_OTA
- Replies: 6
- Views: 6361
Re: ESP_Easy_mega-minimal_ESP8266_1024_OTA
You can compile your own binary by following those instructions : https://www.letscontrolit.com/wiki/index.php?title=Tutorial_building_and_uploading_with_platformio It's easy to reduce the size to 600k. On my side the home made binary work fine on my sonoff 1mb, but after uploading it through 2-step...
- 11 Feb 2019, 10:48
- Forum: ESP Easy: Software
- Topic: ESP_Easy_mega-minimal_ESP8266_1024_OTA
- Replies: 6
- Views: 6361
Re: ESP_Easy_mega-minimal_ESP8266_1024_OTA
Hi, Have you already success to update a 1mb esp8266 through OTA ? On my side : never. However I use the 2-step OTA, I have stretch the binary to a small size (601024 bytes), the upload is ok, but after the reboot the esp is frozen. The result was the same with the minimal binary coming from the dai...
- 20 Dec 2018, 10:06
- Forum: ESP Easy: Software
- Topic: Please make BLANK image flashing unnecessary to enable flawless OTA
- Replies: 14
- Views: 9344
Re: Please make BLANK image flashing unnecessary to enable flawless OTA
I tried today the "new" 2-step-OTA on 1mb flash size (sonoff basic). It's not working, here below all serial logs, 1/ I download the 2-step firmware (through OTA) without any problem Update: ESPEasy_2step_UploaderMega_1024.bin sleep disable ....................................................
- 30 Oct 2018, 09:41
- Forum: ESP Easy: Software
- Topic: Please make BLANK image flashing unnecessary to enable flawless OTA
- Replies: 14
- Views: 9344
Re: Please make BLANK image flashing unnecessary to enable flawless OTA
So the small "2-step OTA" firmware is about 300 kB, which leaves about 575 kB for the normal image on a 1 MB flash. My "little" firmware is less than 500kB : -rw-r--r-- 1 root root 482512 sept. 12 21:53 sonoff.bin When I upload it through the sonoff basic's serial connection (1m...
- 26 Oct 2018, 08:47
- Forum: ESP Easy: Software
- Topic: Please make BLANK image flashing unnecessary to enable flawless OTA
- Replies: 14
- Views: 9344
Re: Please make BLANK image flashing unnecessary to enable flawless OTA
OTA flashing to nodes with 1M of flash is currently next to impossible. The current image size is too large for OTA flashing, even in 2 steps. Hi, do you mean that if we compile our own firmware to reduce the size (I have one less than 500kb), we can't use the 2 steps ? Because on my side the 1st s...
- 26 Oct 2018, 08:43
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
Hi all,
On my side I'm in the same situation..
My pow, without changing the firmware version, have a 59165 minutes uptime...
And, or course, if I have changed a config somewhere, I don't remember what...
Have a good day !
On my side I'm in the same situation..
My pow, without changing the firmware version, have a 59165 minutes uptime...
And, or course, if I have changed a config somewhere, I don't remember what...
Have a good day !
- 02 Oct 2018, 11:55
- Forum: ESP Easy: Software
- Topic: Mega (V2.0.0) OTA firmware updates on 1MB modules
- Replies: 47
- Views: 33790
- 15 Sep 2018, 08:00
- Forum: ESP Easy: Software
- Topic: Mega (V2.0.0) OTA firmware updates on 1MB modules
- Replies: 47
- Views: 33790
Re: Mega (V2.0.0) OTA firmware updates on 1MB modules
I have try to update a sonoff basic (1m) like this : - I have build my own firmware with a size of 580kb approximately - I have uploaded it in the sonoff - Now I can upload ESPEasyUploaderMega_1024 through OTA, the first step - The sonoff reboot and I select the same custom firmware (580k) But after...
- 15 Sep 2018, 07:29
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
Strange.. I continue to have hardware watchdog (every day).. I have read a little bit more about it, it's triggered when the watchdog timer is not reset during 8 sec. So that mean that the code is in a deadlock somewhere (probably).. I just arrive this evening to compile the firmware.. Investigation...
- 11 Sep 2018, 09:14
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
All my sonoff basic have 1024 flash (v1.1 and R2). All my sonoff pow have 4096 flash (only R2). I always update my POW through OTA without any issue (I use the dev-4096 release). About sonoff basic, I only update through serial connection. The 2-step OTA firmware is too big to be store in the free s...
- 09 Sep 2018, 07:25
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
@sincze I have found the issue about On System#Boot do // To have the relay ON after reboot gpio,12,1 endon to avoid switching on then off after 1 sec. I guest that you have a switch in domoticz to control the relay in the POW, and the issue come from domoticz in my automation. It's strange because ...
- 05 Sep 2018, 09:06
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
@sincze "well after a reboot it switches on for 1 sec and then back off" I had a behavior like this a couple of week before, I have changed the mega version and the issue was solved. Actually I'm testing mega-20180804 and the relay stay on after reboot. @TD-er The POW is my only device whi...
- 02 Sep 2018, 06:17
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
Yes now it's working, I have simplify the rules like this : On Button#State do // To have the local button working for ON OFF if [Relay#State]=1 gpio,12,0 else gpio,12,1 endif endon On System#Boot do // To have the relay ON after reboot gpio,12,1 endon On WIFI#RSSI do // To send voltage every 5 minu...
- 31 Aug 2018, 11:23
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
I think I have understood. My gold was to work as a "push" system. In my CSE settings, I have put 0 (zero) in "Interval" field. I was thinking than a trigger was coming when a value is changing (like the "Generic system info" with the RSSI or UPTIME). It was a mistake. ...
- 29 Aug 2018, 10:10
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
I have try a second POW R2 I had. I have exactly the same behavior : no SYS or EVENT log when a CSE7766 properties is changing (for instance Voltage). I have activated NTP to be sure it's not due to this config. And... always the same... My first and second POW R2 have a similar behavior.. I really ...
- 28 Aug 2018, 11:46
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
I have upgraded the POW to mega-20180723 (dev), and it's not working better... Very strange... I'm going to continue to push CSE7759 data through the wifi#rssi trigger, but it's not a "realtime" push, so not very good for the appliance I would like to run.... I have another POW in a box, I...
- 28 Aug 2018, 08:59
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
Thank you for your reply, I don't use NTP (long time ago it was not stable and all is automated from domoticz). But if you really want me to test with NTP I can do it (is there a link between NTP and a triggered property?) I have tested again all properties as "trigger", here below the com...
- 27 Aug 2018, 09:35
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 97600
Re: SonOff POW R2 support
Hi, @sincze which version of mega do you use? I have try mega_20180826 and mega_20180719, both correctly show values from CSE7759, but http push from rules doesn't work... This rules work fine: On WIFI#RSSI do SendToHTTP x.x.x.x,8080,/json.htm?type=command¶m=udevice&idx=88&nvalue=0&a...
- 27 Aug 2018, 09:13
- Forum: Introduce yourself
- Topic: Iaorana from Tahiti
- Replies: 1
- Views: 2467
Iaorana from Tahiti
Hello everybody,
Using espeasy on sonoff basic, touch, pow... and "magic home" led string.
All is automated with domoticz.
Greetings
Using espeasy on sonoff basic, touch, pow... and "magic home" led string.
All is automated with domoticz.
Greetings