Search found 51 matches

by seb82
15 May 2020, 08:47
Forum: RFLink: French support forum
Topic: xlc-rf 5v
Replies: 1
Views: 70

Re: xlc-rf 5v

Oui les pins sont figées dans le firmware. Toutes les indications ici : http://www.rflink.nl/blog2/wiring Attention, le XLC-RF 5v c'est vraiment un très mauvais récepteur. Un RXB6 coût quelques euros et aura une bien meilleure performance. Est-ce qu'au moins il y a une antenne dessus ? Comme souvent...
by seb82
14 May 2020, 11:55
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Ok. I understand better now what you try to achieve and you are not new on the subject. I gave it a chance and went quickly through the code trying to remove all the RF part. Actually, it was quicker than I thought thanks to the way I organized things in the most recent version. Here is where I got:...
by seb82
13 May 2020, 13:57
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Can you please give some hints regarding how to remove all RF related code? I am confused here. No offense, but if you cannot understand how to remove RF related code, how can you hope to implement a custom protocol ? I really believe it is a good thing that people try modifying and programming the...
by seb82
12 May 2020, 18:43
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

955 wrote:
11 May 2020, 22:29
Thanks for insights. Just wanted to let you know that I havn't been able to test yet. I will feedback as soon as I had the chance.
No worry, I was busy anyway. I have also started to rework a little bit the presentation and shall double check this issue with the access point name.
by seb82
12 May 2020, 18:41
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

I am interested in using your library specially your web UI part of it. I do not have any RF devices but I wanted to use it with barebone ESP8266 and BME280 sensor. Is it possible to replace all received data from RF devices by MQTT messages in JSON format and display it with your web UI? I guess i...
by seb82
08 May 2020, 12:44
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Hi, Thanks for your feedback. It is weird that you see ESP_DCD7 as it should be espRFLinkMQTT, or more exacthly what is defined by this line: #define HOSTNAME "espRFLinkMQTT" For MQTT, it will be able to connect only once esp it on the proper Wifi (the network where the MQTT server is). Sometimes it...
by seb82
02 May 2020, 16:51
Forum: ESP Easy: Projects / Applications
Topic: BME 680 sensor
Replies: 25
Views: 11568

Re: BME 680 sensor

I tried to get this sensor working. Here is some feedback : - I started with Adafruit library, but I was getting very weird results and spikes in temperature. - Then I switched to SV-Zanshin library. This one was apparently better. - For temperature measurement, it seems to overheat by 1-1.5 degree....
by seb82
02 May 2020, 15:09
Forum: ESP Easy: General Discussion
Topic: Visual Code - Platformio - what's most straighforward way to compile without issue ?
Replies: 10
Views: 1046

Re: Visual Code - Platformio - what's most straighforward way to compile without issue ?

Just did this test : - Removed .platformio folder (it was installed under C:\.platformio on my computer) - Uninstalled PlatformIO IDE extension from VSCode - Closed VSCode - Reinstalled PlatformIO IDE extension in VSCode - Downloaded last ESPEasy release (Release mega-20200426) - Unzipped and opened...
by seb82
02 May 2020, 01:42
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

If you can test it is good, though the most important is to test the rflink board support which can be enabled with the config file. On my side, I use Jeedom which is a great home automation system developped in France. It comes with a plugin for MQTT. The nice part of it is that most of the configu...
by seb82
02 May 2020, 01:34
Forum: ESP Easy: General Discussion
Topic: Visual Code - Platformio - what's most straighforward way to compile without issue ?
Replies: 10
Views: 1046

Re: Visual Code - Platformio - what's most straighforward way to compile without issue ?

Unsure, but when I looked for a solution a few weeks ago I ended up finding this issue that you opened in November. It seems it was fixed with that pull in February. Maybe at that time you changed something in your local configuration in order to fix it, and thus do not get the error. Nevertheless, ...
by seb82
01 May 2020, 17:06
Forum: ESP Easy: General Discussion
Topic: Visual Code - Platformio - what's most straighforward way to compile without issue ?
Replies: 10
Views: 1046

Re: Visual Code - Platformio - what's most straighforward way to compile without issue ?

There is an issue with the current core relase (2.6.3). In file "platformio_core_defs.ini", under section [core_2_6_3], use platform_packages = framework-arduinoespressif8266 @ https://github.com/esp8266/Arduino.git This should compile. Only thing - if I am not mistaken - is that it now uses the mas...
by seb82
30 Apr 2020, 12:24
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Hi, Actually, I was planning to do it last week but I faced some stability issues that were in fact due to my home wifi setup. I want to rewrite completely the help file, so this may require some extra time. For now, I have just published the most recent code to the dev branch: https://github.com/se...
by seb82
13 Apr 2020, 11:53
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Good ! Yes, It should even be better once you configure MQTT as otherwise it tries to connect every ten seconds which may generate a delay if trying to load a page at that very moment. I spent quite some time on the interface to get it faster and use less memory to avoid crashing the esp which was h...
by seb82
12 Apr 2020, 21:06
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Great news !

I shall include it in the next version of the software then.

What issue are you talking about ?

I can see that MQTT is not connected. Just need to go to the system tab and fill-up parameters (server, port, user and password if any).
by seb82
11 Apr 2020, 10:04
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Great, I did my best to adapt the code from information I found on ESP Easy and RFLink documentation. Specific version uploaded in this branch: https://github.com/seb821/espRFLinkMQTT/tree/rflink-wifi-board. I have even put a .bin file that you can flash directly if you want. In this cas, you need t...
by seb82
10 Apr 2020, 11:38
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

@955

I have re-opened an old issue here: https://github.com/seb821/espRFLinkMQTT/issues/3

It seems that there is a watchdog on RfLink Wifi board which would well explain the behavior you are experiencing.

I can try to implement the code, but I need someone to test it. Let me know.
by seb82
10 Apr 2020, 11:02
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Hello, I have just updated the dev branch with a new version briging lots of improvements and stability: https://github.com/seb821/espRFLinkMQTT/tree/dev In particular, the web inferface should not be blocked in case of MQTT connection failure, which should help for troubleshooting. Please let me kn...
by seb82
06 Apr 2020, 21:38
Forum: ESP Easy: Software
Topic: ESP8266 rapport erreur Plugin _P127_Teleinfo
Replies: 22
Views: 1530

Re: ESP8266 rapport erreur Plugin _P127_Teleinfo

@guy67400, yes indeed I got the same issue at startup with Wifinfo. For the time being I added a delay before wifi startup: // start Wifi connect or soft AP delay(60000); // XXX délai avant connexion wifi pour laisser démarrer le routeur WifiHandleConn(true); Not a very nice fix but it works well (a...
by seb82
05 Apr 2020, 22:49
Forum: ESP Easy: Software
Topic: ESP8266 rapport erreur Plugin _P127_Teleinfo
Replies: 22
Views: 1530

Re: ESP8266 rapport erreur Plugin _P127_Teleinfo

@guy67400, the error you get while trying to compile with platformio is due to a change in a library that affects building of core 2.6.3. I believe TD-er even opened an issue about it some months. It was fix but there has not been a stable release since then. You can use the latest version with that...
by seb82
04 Apr 2020, 07:24
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

For restart, it is difficult to help. If ID filtering is turned off, the VERSION parameter does not matter. In fact, IP filtering configuration is stored in eeprom memory and VERSION is used to detect a change. In the last github version, the page to change configuration is no more /settings but /co...
by seb82
01 Apr 2020, 18:48
Forum: ESP Easy: General Discussion
Topic: How to switch GPIO output using MQTT
Replies: 2
Views: 967

Re: How to switch GPIO output using MQTT

When defining the MQTT controller, there is the setting "Controller Subscribe" which most likely is set to %sysname%/# %sysname% is "Unit Name" in config tab. To send an MQTT command, you need to send it to %sysname%/cmd. Command is the same as with http. For example, I have an esp named esp230. To ...
by seb82
01 Apr 2020, 15:05
Forum: ESP Easy: General Discussion
Topic: is it possible to set the time manually
Replies: 6
Views: 1068

Re: is it possible to set the time manually

Easier: use the Timezone Offset option in advanced configuration
by seb82
01 Apr 2020, 15:04
Forum: ESP Easy: General Discussion
Topic: is it possible to set the time manually
Replies: 6
Views: 1068

Re: is it possible to set the time manually

Directly I do not know.

What you could do is to use a local NTP server, declare it in advanced configuration on the ESP Easy device and change the NTP server time.
by seb82
15 Mar 2020, 17:36
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Well, it is difficult to help you here. Some ideas : - Comment the lines mentionned above that send a ping and version command on startup and see whether it helps (you can try to ping continously the ESP or look at running time on web interface). - Remove antenna so that nothing gets to the RFLink. ...
by seb82
14 Mar 2020, 13:57
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Forget RFLink wifi kit for now. Just connect your computer straight to the NodeMCU micro USB alone. Then you open Arduino IDE Serial Monitor and try to send some commands as if you were the RFLink (lots of examples in the protocol reference ). Idea is to check whether this is stable or not alone. Yo...
by seb82
13 Mar 2020, 14:25
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

In fact, it looks like the ESP is resetting, not the RFLInk as it does not start back at zero (hex number after 20;). My suggestion is to disconnect the RFLink and connect the ESP with USB. Then with the serial monitor, try to send commands from the computer to ESP that are similar to what RFLink se...
by seb82
13 Mar 2020, 14:14
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Perhaps a lot of resets..? This is likely. Indeed, the firmware sends two commands to RFLink at startup : 10;ping; and 10;version; rflinkSerialTX.println(F("10;ping;")); // Do a PING on startup delay(100); rflinkSerialTX.println(F("10;version;")); // Ask version to RFLink Did you wire the reset pin...
by seb82
11 Mar 2020, 16:07
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

955 wrote:
10 Mar 2020, 22:17
Any version restrictions from include libs?
Not really except for Arduinojson as mentionned above.
by seb82
10 Mar 2020, 12:08
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

I have just pushed my latest version to github. - Default configuration is now using RX/TX ESP pins - It does compile properly now while uncommenting SERIAL_DEBUG but I could not test functionnality - There are a few improvements by not using Strings anymore except for web interface I did figure out...
by seb82
07 Mar 2020, 18:26
Forum: RFLink: Hardware Related discussions
Topic: RFLink with NodeMCU, readings are not sent on wifi
Replies: 46
Views: 6410

Re: RFLink with NodeMCU, readings are not sent on wifi

Well this is weird. Especially if it working time to time. Did you try disabling the serial debug ? Maybe it will help releasing some processing time. For information, I have compiled the firmware recently with core 2.6.3 and latest libraries (except Arduinojson that is 5.13.5) and used it with no p...
by seb82
07 Feb 2020, 09:20
Forum: RFLink: French support forum
Topic: Alimentation XD-FST FS1000A pile 9V
Replies: 6
Views: 3753

Re: Alimentation XD-FST FS1000A pile 9V

Je ne sais pas si mélanger des tensions 5V (DATA) et 9V (VCC) soit une super idée. C'est le coup à avoir des polarités qui s'inversent ou trop élevées et cramer des composants. Le mieux ce serait d'ajouter un module step-up comme fait ici . Cela ressemble à ce module mais je ne suis pas certain. Un ...
by seb82
28 Jan 2020, 10:37
Forum: ESP Easy: Software
Topic: Different power consumption in sleep-modes !?
Replies: 14
Views: 4416

Re: Different power consumption in sleep-modes !?

If you want something really efficient for a door contact, you need to add an attiny13 or use another protocol (zigbee for example).
by seb82
28 Jan 2020, 10:34
Forum: ESP Easy: Software
Topic: Different power consumption in sleep-modes !?
Replies: 14
Views: 4416

Re: Different power consumption in sleep-modes !?

deepsleep,1 will put the esp in deepsleep for ... 1s.

Look at the example in this documentation.
by seb82
24 Jun 2019, 18:53
Forum: ESP Easy: Hardware
Topic: esp easy arp table not reachable
Replies: 2
Views: 9019

Re: esp easy arp table not reachable

Look for the option "Periodical send Gratuitous ARP" in the advanced tab. It is described here.
I believe this is what you are are looking for.
by seb82
01 Jun 2019, 06:32
Forum: ESP Easy: Software
Topic: Force update OLED from rules
Replies: 1
Views: 5075

Re: Force update OLED from rules

Did you try with taskrun ?
by seb82
15 May 2019, 23:27
Forum: ESP Easy: Software
Topic: ESPEasy + RFLink + Domoticz as Client
Replies: 3
Views: 1030

Re: ESPEasy + RFLink + Domoticz as Client

Hello,

I made a firmware that publishes everything from an RFLink to a MQTT server : espRFLinkMQTT

Maybe this could be an option, possibly with something like CloudMQTT for example.
by seb82
12 May 2019, 22:59
Forum: ESP Easy: Hardware
Topic: Please recommend me good esp8266 board ..
Replies: 11
Views: 1784

Re: Please recommend me good esp8266 board ..

I would recommend the official Wemos store . You can find other D1 mini (pro) boards, but most of the time they are copies with wrong components and it will create random issues. Robotdyn also seem to have some esp8266 boards though I have not tried them (but their other boards seem to be of good qu...
by seb82
05 May 2019, 18:40
Forum: ESP Easy: Projects / Applications
Topic: water level with ultrasonic distance meter - error readings
Replies: 15
Views: 4691

Re: water level with ultrasonic distance meter - error readings

Hello everyone, I have been looking for quite some time at this question (measuring levels in a fuel tank and a swimming pool) and I tried to summarize some experience and references below. Hopefully it can help and give ideas for specific cases. For fuel tank: - HC-SR04 was seeing the walls (too la...
by seb82
18 Apr 2019, 09:38
Forum: ESP Easy: Software
Topic: What can users do to make ESPEasy more attractive.
Replies: 16
Views: 2784

Re: OTA updates on 1MB devices

Hello, I do agree with some previous comments. First, I believe you should advertise directly on github release download page . Personaly, I only go there most a the time. Second, it would be good to clarify / update the development status. On ESPEasy wiki page , it mentions a new stable version on ...
by seb82
24 Jan 2019, 10:17
Forum: ESP Easy: General Discussion
Topic: Can't compile with a new plugin (PZEM004T)
Replies: 22
Views: 6780

Re: Can't compile with a new plugin (PZEM004T)

Great !

It means you used hardware serial RX/TX, doesn't it ?

Normally, you should be able to change it directly in the web interface. But first, you must disable serial log in the advanced page.
by seb82
22 Jan 2019, 10:54
Forum: ESP Easy: General Discussion
Topic: Can't compile with a new plugin (PZEM004T)
Replies: 22
Views: 6780

Re: Can't compile with a new plugin (PZEM004T)

To be sure, I have just recompiled with the files directly from my github (library + .ino) for release 20190116 and it works. PZEM004T.png Maybe you could try setting PLUGIN_171_DEBUG to true in the .ino file and see if you get more information. And also, maybe try other pins and double check wiring...
by seb82
19 Jan 2019, 10:52
Forum: RFLink: Development and announcements
Topic: RFLink Wifi ESP
Replies: 8
Views: 11814

Re: RFLink Wifi ESP

I developped my own firmware to retrieve data throught MQTT if interested : https://github.com/seb821/espRFLinkMQTT
by seb82
19 Jan 2019, 10:05
Forum: ESP Easy: General Discussion
Topic: Can't compile with a new plugin (PZEM004T)
Replies: 22
Views: 6780

Re: Can't compile with a new plugin (PZEM004T)

I forked the library and included modifications to get it to work with ESPEasy last release (20190116): https://github.com/seb821/PZEM004T The .ino plugin file I use is also included. To compile with platformio : - .ino file goes into source/src - other files go into source/lib/PZEM004T - in platfor...
by seb82
19 Jan 2019, 09:40
Forum: ESP Easy: General Discussion
Topic: Can't compile with a new plugin (PZEM004T)
Replies: 22
Views: 6780

Re: Can't compile with a new plugin (PZEM004T)

I tested first with an Arduino Nano to make sure hardware was ok with code from these links: https://github.com/JhonControl/PZEM-004t-basic-ESP32-Arduino-ESP8266-Python-RPi/tree/master/PZEM_ArduinoNANOSoftSerial http://pdacontrolen.com/electricity-consumption-meter-peacefair-pzem-004-esp8266-arduino...
by seb82
19 Jan 2019, 09:22
Forum: ESP Easy: General Discussion
Topic: RPIEasy
Replies: 259
Views: 68519

Re: RPIEasy

[...] I am a little uncertain what do you need exactly. [...] Because "#" character will be replaced by taskname and valname automatically. This is the default behaviour of the Generic MQTT controller. I can implement %taskname% and %valuename% if the above is not working with OpenHab. Indeed, my n...
by seb82
16 Jan 2019, 09:26
Forum: ESP Easy: General Discussion
Topic: RPIEasy
Replies: 259
Views: 68519

Re: RPIEasy

Just tested it on an old Raspberry 1 and it is really nice. I like it. To keep everything consistent with other ESPEasy devices, would it be possible to take in account %tskname% and %valname% in the MQTT topics ? This is the default publish topic when selecting OpenHAB MQTT in ESPEasy : /%sysname%/...
by seb82
07 Jan 2019, 14:42
Forum: ESP Easy: General Discussion
Topic: Can't compile with a new plugin (PZEM004T)
Replies: 22
Views: 6780

Re: Can't compile with a new plugin (PZEM004T)

It does compile with release 20181231. In release 20190107, it looks like they changed the name of the library from ESPEasySoftwareSerial to ESPEasySerial (in source/lib). These changes will have to be reported in the plugin .ino file and possibly in the modified PZEM004 library as references and ob...
by seb82
03 Jan 2019, 19:29
Forum: ESP Easy: General Discussion
Topic: Can't compile with a new plugin (PZEM004T)
Replies: 22
Views: 6780

Re: Can't compile with a new plugin (PZEM004T)

@goldriver In the PZEM004T library folder, in library.json remove the dependancy to EspSoftwareSerial : { "name": "PZEM004T", "frameworks": "arduino", "keywords": "peacefair, pzem, powermeter", "description": "Enables communication with Peacefair PZEM-004T Energy monitor", "url": "https://github.com...
by seb82
23 Oct 2018, 19:28
Forum: Experimental
Topic: Serial Server - how to send commnad to Serial port from ESP?
Replies: 10
Views: 6820

Re: Serial Server - how to send commnad to Serial port from ESP?

Thanks for the link. It is great if there is a plugin for ESP Easy, I shall try for sure.

At the time, I believe it was not existing so I made my own firmware with the help of some existing code from github. It can be found here : https://github.com/seb821/espRFLinkMQTT
by seb82
05 Sep 2018, 11:04
Forum: ESP Easy: General Discussion
Topic: Event Processing - RFLink
Replies: 5
Views: 2229

Re: Event Processing - RFLink

This is working for me with "RFLink" selected for event processing and this rule: On !RFLink#* do Publish test,%eventvalue% endon Or if you select "Generic" for event processing: On !Serial#* do Publish test,%eventvalue% endon I had to put a "RX Receive Timeout" of 10 ms or it would strip off a few ...