Search found 164 matches

by Sasch600xt
24 May 2022, 20:16
Forum: ESP Easy: General Discussion
Topic: Sensor Values calculating
Replies: 9
Views: 4758

Re: Sensor Values calculating

YAY :) Sounds great ^^
by Sasch600xt
24 May 2022, 19:05
Forum: ESP Easy: General Discussion
Topic: Sensor Values calculating
Replies: 9
Views: 4758

Re: Sensor Values calculating

YAY :) this is how it works perfect now ! on LPGLevel#LPG do let,6,(%eventvalue%-952)/244.83 let,6,{constrain:[var#6]:0:100} endon so i removed all spaces in between :) I bought you some coffee right now but i can´t afford a coffee always i make a mistake. Simply because i make too much mistakes lol...
by Sasch600xt
23 May 2022, 21:24
Forum: ESP Easy: General Discussion
Topic: Sensor Values calculating
Replies: 9
Views: 4758

Re: Sensor Values calculating

Hello :) right now i did try to set my rule like: on LPGLevel#LPG do let,6,(%eventvalue1% - 952) / 244.83 // (25435-952)/100 let,6,{constrain:[var#6]:0:100} endon var#6 always shows "0" as result But this: on LPGLevel#LPG do let,6,%eventvalue1% endon and this: on LPGLevel#LPG do let,6,(%ev...
by Sasch600xt
17 May 2022, 15:21
Forum: ESP Easy: General Discussion
Topic: Sensor Values calculating
Replies: 9
Views: 4758

Re: Sensor Values calculating

great to point me to the constrain function :) looks great :) This is very useful when we work with raw sensor values. In my house control system (about local water tank) i have the line: $percent=(GetValueInteger(59082)-$empty)/($full-$empty)*100; // convert to percent (0-100%) But at the end of th...
by Sasch600xt
17 May 2022, 13:46
Forum: ESP Easy: General Discussion
Topic: Sensor Values calculating
Replies: 9
Views: 4758

Sensor Values calculating

Hello all :) I connected my LPG fuel tank sensor to my ESP32 in my Car. I had already done this in my house control system with my local water tank at home, but now I have to do all the calculations inside of the car ESP. First I have two values from the sensor at my ADS1115 connected and working wi...
by Sasch600xt
15 Nov 2021, 00:00
Forum: ESP Easy: General Discussion
Topic: Uptime ESP8266 :)
Replies: 1
Views: 4176

Uptime ESP8266 :)

Just for smiling :)
Screenshot 2021-11-14 235651.png
Screenshot 2021-11-14 235651.png (17.25 KiB) Viewed 4176 times
.....and still running :)
by Sasch600xt
14 Nov 2021, 23:58
Forum: ESP Easy: General Discussion
Topic: One ESP two network settings
Replies: 3
Views: 4531

Re: One ESP two network settings

Thank you for your answeres.

yes, i guess i give DHCP a try. It would make it a lot more easy :)

Have a great day
Sascha
by Sasch600xt
12 Nov 2021, 21:00
Forum: ESP Easy: General Discussion
Topic: One ESP two network settings
Replies: 3
Views: 4531

One ESP two network settings

Hello all :) sure there is a fallback network but i work with fixed IPs and subnet/DNS. So i have an ESP in my Car connected to my mobil router in the car. Where my car is parked, there is also my home wifi in range. So i would love to switch off the router in my car, while my car is at home. For th...
by Sasch600xt
16 Sep 2021, 22:17
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

my dashcams are connected to the esp and a few servos controlling the car.
most of the time i´m in the back, sleeping.

no, serious, my girlfriend helped me out and where looking at the tablet and the display.
so all was safe :)
by Sasch600xt
16 Sep 2021, 21:34
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

i am back from testdrive :) just want to let you know, the conversation in rules works perfect now ! no errors anymore, straight values every second. Thank you for all your great hints :) I am looking forward to use more then 4 parameters, but i can wait a long time for. The "must" is work...
by Sasch600xt
16 Sep 2021, 12:42
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

at least not one meter behind my old spot ^^
by Sasch600xt
16 Sep 2021, 09:00
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

your right :(
when i do a long ride over hundreds of kilometer and close to the goal the esp resets..... that would be depressing !
by Sasch600xt
16 Sep 2021, 08:48
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

Good morning :) I solved it at my backend software and i could also solve it in rules now, but for next update, you could maybe change the value after reset. The value for distance is "-1" after reset. If it could be "0" would great :) It is also very dangerous on the highway !!!...
by Sasch600xt
15 Sep 2021, 23:03
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

great :)

by the way, another esp with espeasy:
(have a look for uptime :))
Screenshot 2021-09-15 230158.jpg
Screenshot 2021-09-15 230158.jpg (43.5 KiB) Viewed 13969 times
by Sasch600xt
15 Sep 2021, 22:39
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

i want my display in my car refresh every second with the gsp speed.

ist it ok to have a timerinterval of one second, or is this too often ?

Code: Select all

On Rules#Timer=3 do
  let,1,[GPS#spd]*3.6 // Store speed in km/h in variable #1
  timerSet,3,1
endon
by Sasch600xt
15 Sep 2021, 22:24
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

this is soooooo cool !!! now i send traveled distance converted in km to my display which is connected to the ESP but at the same time publish it in meters to my controller hub. This is amazing !! I love it :) tomorrow i do some tests about the conversation errors in the plugin (which i dont need an...
by Sasch600xt
15 Sep 2021, 09:00
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

Good morning :) this build: Screenshot 2021-09-15 085225.jpg i do the conversation right in the plugin: Screenshot 2021-09-11 195155.jpg I have a display connected to the ESP in my car and i want the gps speed update every second. So display and gps is set to 1 second interval. this is why i do not ...
by Sasch600xt
14 Sep 2021, 22:16
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

Hello, i come right now back from more tests about the gps plugin and found a strange behavior. i found out, my conversation in the plugin like %value%*3.6 for m/s into kph or %value%/1000 for meters into kilometers ist not always working and is been ignored sometimes and published without conversat...
by Sasch600xt
14 Sep 2021, 12:50
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

ok, i´ll try to solve this in my backend software behind the ESP :)
by Sasch600xt
14 Sep 2021, 12:33
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

hahahahaha, ok :) by the way......do you know where i can buy an uBlox M8N ORIGINAL and not a clone ? I would love to have a "real" one instead of the clones I have here... Do you have an idea how I can store and publish the stored ODO value ? At the moment always the ESP reboots, the ODO ...
by Sasch600xt
14 Sep 2021, 12:05
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

ok :)

i did swap alt with dist for now.

if i can breath i know i am below 6000 meter, so easy to check :)
by Sasch600xt
14 Sep 2021, 10:48
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

YAY, that means I am doing nothing wrong here !!! LOL :)

Would it be easy to just add a 5th field for the plugin for now ?
otherwise, i will swap the value alt to dist
by Sasch600xt
14 Sep 2021, 10:06
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

Hello :) yes, distance and travelled I combine already :) Thank you for your ideas I have 4 values in the plugin set up which works good (speed, alt, long,lat) now I would love to publish a 5th value like ODO. in rules i try: Publish,"%sysname%/GPS/Distanz Trigger/ODO", [GPS#dist] But it d...
by Sasch600xt
11 Sep 2021, 20:02
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

Re: GPS Plugin P082

Hello TD-er, I forgot to tell i multiplied by 3.6 already :) Screenshot 2021-09-11 195155.jpg Thank you for the hint about the post formatting. I'll have a look right now :) I do not have Wi-Fi only, I am online all the time with my car. So for this case I'll have to take care about my data traffic....
by Sasch600xt
11 Sep 2021, 19:09
Forum: ESP Easy: General Discussion
Topic: GPS Plugin P082
Replies: 30
Views: 14185

GPS Plugin P082

Hello all :) Today I made my first experience with the GPS plugin. First, thank you for this great and easy way to connect a GPS sensor to the esp :) I know it is in beta phase, but may I say what I recognized today ? - sometimes I get some impossible values for speed, like I drive about 70 kph, and...
by Sasch600xt
06 Jul 2021, 20:40
Forum: ESP Easy: General Discussion
Topic: which file for OTA update
Replies: 4
Views: 5308

Re: which file for OTA update

thanks :)

you guys are amazingly fast with support answeres :)

OTA worked out perfectly

Have a great day :)
Screenshot 2021-07-06 203844.jpg
Screenshot 2021-07-06 203844.jpg (86.44 KiB) Viewed 5297 times
by Sasch600xt
06 Jul 2021, 20:11
Forum: ESP Easy: General Discussion
Topic: which file for OTA update
Replies: 4
Views: 5308

which file for OTA update

Hello all :), i would love to do an OTA update for my ESP32 device. it´s been a while when i did the last update. i reconized, there are files labeled with A,B,C,D ? i attache a picure of my actuall firmware. could you help me find the right firmware ? question would be, is it also possible to do an...
by Sasch600xt
14 May 2021, 18:06
Forum: ESP Easy: General Discussion
Topic: Keystrokes
Replies: 2
Views: 4303

Keystrokes

Hello all, i could not find the answere :( is there a simple way to have ESPEasy connected via USB to an Windows 10 PC and submit asci keystrokes connected to an gpio port ? So i want to press a hardwarebutton connected to the ESP and get a Keystroke (eg. F1) as a asci signal like a usb keybord. Tha...
by Sasch600xt
20 Jan 2021, 14:51
Forum: ESP Easy: Software
Topic: Plug-in for MAX31865 RTD or MAX31856 Thermocouple IC?
Replies: 29
Views: 14405

Re: Plug-in for MAX31865 RTD or MAX31856 Thermocouple IC?

4 years later :)

any news ?
Can i use my PT100 on my MAX31865 board with SPI interface in espeasy ?
is there a plugin now ?

Thank you so much and have a great day !
Sascha
by Sasch600xt
14 Sep 2020, 15:50
Forum: ESP Easy: General Discussion
Topic: Docu about Filtersize HC-SR04 Plugin
Replies: 1
Views: 4546

Docu about Filtersize HC-SR04 Plugin

Hello,

coiuld someone explain the filtersize settings to me ?
I can´t find a docu about it.

Thank you so much and have a great day :)
Sascha
Screenshot 2020-09-14 154711.jpg
Screenshot 2020-09-14 154711.jpg (69.15 KiB) Viewed 4546 times
by Sasch600xt
08 Jun 2020, 17:30
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 587
Views: 1867258

Re: Nextion display plugin

And keep in mind that to change a text message in a Nextion touch display requires a SD card or direct USB connection. hi Thomas :) are you talking about changing the text which is displayed in a textfield or a button at the nextion display ? For my arduinos i use this commands over serial which wo...
by Sasch600xt
07 Jun 2020, 14:52
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

YAY !!! It works PERFECT with the internal sys variables ! @grovkillen: Thank you so much for your patience and great code @Ath: also thanks for your patience and help. you where right, mcp#29 had also to be reconized. (this is when i put the reverse gear in) I LOVE the ESP32 :) But i made a lot of ...
by Sasch600xt
07 Jun 2020, 14:11
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

this is how my rules look like at the sysboot: on System#Boot do monitor,mcp,1 monitor,mcp,2 monitor,mcp,3 monitor,mcp,4 monitor,mcp,5 monitor,mcp,6 monitor,mcp,7 monitor,mcp,8 monitor,mcp,9 monitor,mcp,10 monitor,mcp,11 monitor,mcp,12 monitor,mcp,13 monitor,mcp,14 monitor,mcp,15 monitor,mcp,16 moni...
by Sasch600xt
07 Jun 2020, 14:09
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

to be honest i do NOT have the MCPs in devicepage.

because there are 16 outputs and 16 inputs.
How can i handle that in devicepage for 12 devices ?
by Sasch600xt
07 Jun 2020, 13:41
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

this is the log: 39423: EVENT: Clock#Time=Sun,13:39 63979: WD : Uptime 1 ConnectFailures 0 FreeMem 20552 WiFiStatus 3 74572: EVENT: MCP#18=1 74593: ACT : Event,triggering=,, 74594: Command: Event 74594: EVENT: triggering=,, 77172: EVENT: MCP#18=0 77193: ACT : Event,triggering=,, 77194: Command: Even...
by Sasch600xt
07 Jun 2020, 13:37
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

i hope i know how to do so :) i found a little mistake in the code and changed it already : on mcp#18 do Event,triggering=[MCP#18],[MCP#17],[MCP#29] endon on mcp#17 do Event,triggering=[MCP#18],[MCP#17],[MCP#29] endon on triggering do if %eventvalue1%=1 MCPGPIO,1,1 endif if %eventvalue1%=0 AND %even...
by Sasch600xt
07 Jun 2020, 13:14
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

Thank you for your help.

with the new code nothing is working, not ON, not OFF and not depending on state of mcp#29.

monitoring is avtivated for all mcp channels.

but the code looks wonderful and exactley what i need :)
by Sasch600xt
07 Jun 2020, 11:26
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

Good morning all :)

So maybe today we get it to work :)
I am so sorry that it turns out more complicated then i thought :(

Happy Sunday :)
by Sasch600xt
06 Jun 2020, 23:58
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

same here :) i try again tomorrow.

But thanks alot for all your help already !

good night :)
by Sasch600xt
06 Jun 2020, 23:34
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

ok, this i did for now:

Code: Select all

on mcp#18 do
  LogEntry,"MCP 18: [mcp#18], MCP 17: [mcp#17]"
  if [mcp#18]=0
    if [mcp#17]=0
      MCPGPIO,2,0
    endif
  else
    MCPGPIO,2,1
  endif
endon
i can switch it ON, but not OFF
by Sasch600xt
06 Jun 2020, 20:53
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

thank you for helping :) i did try TDer´s code but this was also no luck. Maybe i try to explain what i want to do with the code: the ESP is in my Car. I try to control my extended rear lights. i have a switch with 3 Positions: Pos "up" = mcp#18 HIGH Pos "middle" = mcp#18 AND mcp...
by Sasch600xt
06 Jun 2020, 20:18
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

ok, thank you i have it now like this: on mcp#18=1 do MCPGPIO,1,1 endon on mcp#18=0 do if [mcp#17]=0 do MCPGPIO,1,0 endif endon on mcp#17=1 do if [mcp#29]=1 do MCPGPIO,1,1 else MCPGPIO,1,0 endif endon but still only the first block is working. second block does not switch MCPGPIO "low" and...
by Sasch600xt
06 Jun 2020, 17:41
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

thank you :) i changed it to: on mcp#18=1 do MCPGPIO,1,1 endon on mcp#18=0 do if mcp#17=0 do MCPGPIO,1,0 endif endon on mcp#17=1 do if mcp#29=1 do MCPGPIO,1,1 else MCPGPIO,1,0 endif endon "Maybe add a logentry statement in that block, to make sure it is detected as being 'low'." Could you ...
by Sasch600xt
06 Jun 2020, 16:06
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

Re: syntax question

yes, monitor is activated for all MCP inputs.
by Sasch600xt
06 Jun 2020, 15:39
Forum: ESP Easy: General Discussion
Topic: syntax question
Replies: 27
Views: 29706

syntax question

Hello all :) i have an 3 way switch and try to do something like this, but it wont work :( sure the problem is me :) if the switch is in position "up" i want to switch MCPGPIO,1,1 (works already) if the switch is in middle position i want MCPGPIO,1,0 (does not work) if the switch is in pos...
by Sasch600xt
08 Apr 2020, 23:28
Forum: ESP Easy: General Discussion
Topic: OTA Update
Replies: 3
Views: 5824

Re: OTA Update

Thank you for your help.

tomorrow i will try it by ethernetcable with my laptop.
otherwise i will do it from scratch and rebuild the settings manually

stay safe all :)
by Sasch600xt
08 Apr 2020, 01:06
Forum: ESP Easy: General Discussion
Topic: OTA Update
Replies: 3
Views: 5824

OTA Update

Hello all, i try to do an OTA Update from this: Build:⋄ 20104 - Mega System Libraries:⋄ ESP82xx Core 2_6_0, NONOS SDK 3.0.0-dev(c0f7b44), LWIP: 2.1.2 PUYA support Git Build:⋄ mega-20191119 Plugins:⋄ 79 [Normal] [Testing] Build Md5: 5a5e49d565d371cb46fee8115b2117 Md5 check: passed. Build Time:⋄ Nov 1...
by Sasch600xt
30 Mar 2020, 21:09
Forum: ESP Easy: General Discussion
Topic: Syntax
Replies: 6
Views: 6170

Re: Syntax

thank you but this would trigger the heaters too often.

temp is an float with 2 decimals.

so with your code the heater would switch on at 14.99 degree and switch off at 15.00, am i right ?


i need one degree buffer (<15 ON and >16 Off)
by Sasch600xt
30 Mar 2020, 18:57
Forum: ESP Easy: General Discussion
Topic: Syntax
Replies: 6
Views: 6170

Re: Syntax

but it should run once in a minute while MQTT Broker is offline. after MQTT broker is online it should not run at all. So the timer set was wrong ? is this better ? on MQTT#Connected do timerSet,8,0 endon on MQTT#Disconnected do timerSet,8,60 endon On Rules#Timer=8 do timerSet,8,60 if [Unten#Temp]<1...
by Sasch600xt
30 Mar 2020, 18:00
Forum: ESP Easy: General Discussion
Topic: Syntax
Replies: 6
Views: 6170

Syntax

Hello, i am not sure about the Syntax (again :() i do not have the device at home, so i have to make sure the code is working when i upload it to the device which controls some big gas heaters. What i try to do is an emergency plan when my houscontrolling software crashes. So in the case MQTT is dis...