Search found 12 matches

by hoeby
20 Oct 2019, 08:22
Forum: RFLink: Hardware Related discussions
Topic: Somfy Tilt 50 RTS needs continuous transmission
Replies: 2
Views: 3300

Re: Somfy Tilt 50 RTS needs continuous transmission

Did somebody found an answer to this problem? I think i know what causes this: The RF-link is sending the controlling command to long. I also have a somfy remote. When i push short the UP button, than the blind will fully turn UP. This is the same for the other buttons (DOWN and MY). But when i hold...
by hoeby
20 Oct 2019, 08:16
Forum: RFlink: General Discussions
Topic: How to change direction of Somfy roller shutters
Replies: 3
Views: 3569

Re: How to change direction of Somfy roller shutters

A late reply, but to get the question answered.

To change the direction of the motor. This has to be done with a somy remote.
See the instructions of the somfy remote. There is written how to change the direction.
by hoeby
20 Oct 2019, 08:11
Forum: RFlink: General Discussions
Topic: Somfy RTS inverted control
Replies: 2
Views: 9954

Re: Somfy RTS inverted control

You need to follow the manual from somfy for this.
With a somfy remote you can change the direction of the motor. That up will be the same direction as your other blinds

I have 2 blinds and 2 curtains.
Had the same problem, with the remote i changed the direction.
by hoeby
19 Oct 2019, 12:37
Forum: ESP Easy: General Discussion
Topic: Read internal analog value change, in a running event. But how?
Replies: 4
Views: 5494

Re: Read internal analog value change, in a running event. But how?

I solved it with the use of a dummy devices.
When the event is running a dummy is set to 1.
When the event is finished, an other script is started because the dummy is 1. Because the second script is started within a second after the first is finished, this works for me.
by hoeby
18 Oct 2019, 12:09
Forum: ESP Easy: General Discussion
Topic: Read internal analog value change, in a running event. But how?
Replies: 4
Views: 5494

Re: Read internal analog value change, in a running event. But how?

The problem is not an unstable read of the analog read. The problem is that i start an event. The first action of the event, changes the analog value. But when running the event, it doesn't look at the changed value. It takes the value, which it was just bedoel the event was triggered. Does the use ...
by hoeby
18 Oct 2019, 09:37
Forum: ESP Easy: General Discussion
Topic: Read internal analog value change, in a running event. But how?
Replies: 4
Views: 5494

Read internal analog value change, in a running event. But how?

I am trying to control a somfy telis 4 remote. This i am using to control the curtains and blinds. It is possible to run a HTTP event. This controlls the devices, but there was no feed-back. I made the script to go always back to channel 1 on the remote. So the starting point is always the same on t...
by hoeby
02 Oct 2019, 15:42
Forum: ESP Easy: General Discussion
Topic: How to?, HTTP request to trigger PCF8574 switch input
Replies: 6
Views: 5978

Re: How to?, HTTP request to trigger PCF8574 switch input

You should always trigger things using events. The funny thing about it. After seeing that taskvalueset didn't worked i moved to the wiki. First reading the taskvalueset part, but then noticed the event part. :idea: :idea: :idea: a light went on between my ears. Modified the config and it Works for...
by hoeby
01 Oct 2019, 21:31
Forum: ESP Easy: General Discussion
Topic: How to?, HTTP request to trigger PCF8574 switch input
Replies: 6
Views: 5978

Re: Solved. How to?, HTTP request to trigger PCF8574 switch input

I found those commands. But they are all triggering an output, and not the switch (when doing HTTP request). I tried the taskvalueset by http When doing that command, the switch changes from 0 to 1 (or backwards), but the rules is not triggered. Then triggering the input by cable, the switch also ch...
by hoeby
01 Oct 2019, 07:55
Forum: ESP Easy: General Discussion
Topic: How to?, HTTP request to trigger PCF8574 switch input
Replies: 6
Views: 5978

Re: How to?, HTTP request to trigger PCF8574 switch input

Found the answer.
Need to use taskvalueset

This works
It sets task 3, switch to 0

Code: Select all

http://192.168.178.XXX/control?cmd=taskvalueset,3,1,0
This sets task 3, switch to 1

Code: Select all

http://192.168.178.XXX/control?cmd=taskvalueset,3,1,1
by hoeby
30 Sep 2019, 22:04
Forum: ESP Easy: General Discussion
Topic: How to?, HTTP request to trigger PCF8574 switch input
Replies: 6
Views: 5978

How to?, HTTP request to trigger PCF8574 switch input

Hopefully somebody can help me, i can't find the solution. When doing http://192.168.178.xxx/control?cmd=gpio,14,1 This sets GPIO switch on 1 This gives the answer: { "log": "GPIO 5 Set to 0", "plugin": 1, "pin": 5, "mode": "output", "state": 1 } I would like to have the same, but than for a PCF8574...
by hoeby
04 Aug 2019, 21:21
Forum: ESP Easy: Software
Topic: ESPEasy WiFi reconnect Rules
Replies: 10
Views: 4385

Re: ESPEasy WiFi reconnect Rules

Would like to use the script, but have some question about it

The script uses

Code: Select all

VAR#1
Do i need to make a dummy device (or something else) to store the value.
Or is VAR a default function in espeasy?
by hoeby
31 Jul 2019, 07:33
Forum: RFLink: Nederlands support forum
Topic: Somfy motoren aansturen via IP Control
Replies: 5
Views: 4323

Re: Somfy motoren aansturen via IP Control

Ik gebruik de somfy tilt50 (jaloezie) en de somfy movelite (gordijnrails). Doch stuur ik ze aan via domoticz. Net zoals Clauculo aangeeft, zou ik naar een compleet plaatje kijken, zodat je voor de toekomst meerdere zaken vanuit 1 omgeving kan doen. Een extra reden waarom je naar een dergelijk platfo...