Search found 8 matches
- 13 Oct 2022, 17:25
- Forum: ESP Easy: General Discussion
- Topic: [SOLVED] PWM control over circulation pump
- Replies: 2
- Views: 1734
Re: PWM control over circulation pump
Thank you chrome123! Only 2 cables are needed (middle is GND and outside-one is PWM). It works like a charm!
- 12 Oct 2022, 21:30
- Forum: ESP Easy: General Discussion
- Topic: [SOLVED] PWM control over circulation pump
- Replies: 2
- Views: 1734
[SOLVED] PWM control over circulation pump
I bought Grundfos Alpha 1L PWM, where cable connection has three leads: signal input, signal output and signal reference. I am going to control it (speed) with D1 Wemos mini running (of course) espeasy. Reference is GND but where / as what connect the others? I know which PINs on Wemos are applicabl...
- 15 May 2022, 19:27
- Forum: ESP Easy: Hardware
- Topic: LCT-167 / PWM to 0-10v
- Replies: 8
- Views: 5622
Re: LCT-167 / PWM to 0-10v
Today was the day. I connected LCT-167 to Wemos D1 mini (D5), installed mega normal from 27.04 (4m) and tried to control with several duties (0-1023). Input Voltage is 12V. The output I get within the range 0 - 1,2 V instead of expected 0-10V. Is there any other setting to be done in Espeasy or is t...
- 11 May 2022, 13:40
- Forum: ESP Easy: Hardware
- Topic: LCT-167 / PWM to 0-10v
- Replies: 8
- Views: 5622
Re: LCT-167 / PWM to 0-10v
One more question. If the range of the duty is 0 .. 1023 and I want to set it to 800 then for the voltage output (0..10) it would mean: 800 / 1023 * 10 = 7,82V.
Am I right?
Am I right?
- 10 May 2022, 20:39
- Forum: ESP Easy: Hardware
- Topic: LCT-167 / PWM to 0-10v
- Replies: 8
- Views: 5622
Re: LCT-167 / PWM to 0-10v
Thank you both Ath & TD-er. Was not aware that PWM doesn't need to be specified as a separate device. I've just read few posts and now it shouldn't be a problem. Regarding direct connection of PWM I read about successful implementation of qubino FLUSH DIMMER 0-10V in the same way. Having wifi &a...
- 10 May 2022, 14:14
- Forum: ESP Easy: Hardware
- Topic: LCT-167 / PWM to 0-10v
- Replies: 8
- Views: 5622
LCT-167 / PWM to 0-10v
Hello, anybody knows how to connect / as a what kind of device to wemos d1? I am going to control my air ventilation using 0-10v / espeasy instaed of built-in controller, over Domoticz. Is it possible to do it that way? The picture is in Polish but you probably will understand the most interesting p...
- 26 Nov 2018, 00:10
- Forum: ESP Easy: Software
- Topic: "Publish" to Domoticz
- Replies: 2
- Views: 3269
Re: "Publish" to Domoticz
Thank you enesbcs! Point 1 did the trick
- 25 Nov 2018, 19:59
- Forum: ESP Easy: Software
- Topic: "Publish" to Domoticz
- Replies: 2
- Views: 3269
"Publish" to Domoticz
Hello, following a wiki I managed to connect PMS7003 (smog detector) to D1 Wemos mini using latest Espeasy mega. I see the values in ESP (all 3 pm 1/2.5/10) but I am not able to send them to Domoticz. Changing some of the examples I made and put among the rules: Publish domoticz/in,{"idx":...