Search found 6 matches
- 05 Feb 2019, 16:07
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 no setting for resolution DS18B20
- Replies: 11
- Views: 7101
Re: ESPEasy R120 no setting for resolution DS18B20
Yeah, i do. It is working just fine at 12bit, until a hard reboot.
- 19 Jan 2019, 20:59
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 no setting for resolution DS18B20
- Replies: 11
- Views: 7101
Re: ESPEasy R120 no setting for resolution DS18B20
Currently running ESPEasy_v2.0-20180322, but I've also used 2.0.0 dev11. With both versions I can set DS18B20 to 12 bit, but after a hard reboot it is back at 9 bit. (with a soft reboot it stays at 12 with 20180322. It would be nice if it would stay at 12bit even after a hard reboot. Is it a bug or ...
- 11 Jan 2019, 22:31
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 no setting for resolution DS18B20
- Replies: 11
- Views: 7101
Re: ESPEasy R120 no setting for resolution DS18B20
Ah, clear. Thanks a lot for building this! I appreciate it a lot!grovkillen wrote: ↑11 Jan 2019, 16:37 It's still the official stable but since then we (TD-er and myself) have taken over the project and we're working for a new stable.
PS. If all is working well, I'll send a donation in your direction.
- 11 Jan 2019, 16:32
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 no setting for resolution DS18B20
- Replies: 11
- Views: 7101
Re: ESPEasy R120 no setting for resolution DS18B20
Ok, that's a bit weird though that it is recommended on the start page as the stable version, while better versions are available.grovkillen wrote: ↑10 Jan 2019, 21:37 R120 is really old. If you need better resolution you need to upgrade to newer versions.
But I'll try a newer version then, thanks.
- 10 Jan 2019, 21:35
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 no setting for resolution DS18B20
- Replies: 11
- Views: 7101
Re: ESPEasy R120 no setting for resolution DS18B20
I didn't know that, thanks for the info.
I've changed to GPIO14 (D5). Sensors works fine again, but still in 9bit mode. And I can't find any option to change this setting.
I forgot to mention this earlier:
Build: 120
Core Version: 2_3_0
I've changed to GPIO14 (D5). Sensors works fine again, but still in 9bit mode. And I can't find any option to change this setting.
I forgot to mention this earlier:
Build: 120
Core Version: 2_3_0
- 10 Jan 2019, 12:00
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 no setting for resolution DS18B20
- Replies: 11
- Views: 7101
ESPEasy R120 no setting for resolution DS18B20
I've got an ESPEasy device (NodeMCU) with a DS18B20 and DHT11. Everything is working properly, besides the resolution of the DS18B20. The readings I get in the interface are 1°C apart from each other. I would like to change the resolution, but the web interface does not have this option. I remember ...