Search found 8 matches

by sedini
24 Jan 2019, 20:09
Forum: ESP Easy: Software
Topic: relay go on but after gpio12.0 it will stay on help plz
Replies: 6
Views: 4137

Re: relay go on but after gpio12.0 it will stay on help plz

And which version of ESPeasy ? mega-20190116 What response of your ESP in browser after sending this commands? http://192.168.1.9/control?cmd=GPIO,12,1 { "log": "GPIO 12 Set to 1", "plugin": 1, "pin": 12, "mode": "output", "state"...
by sedini
23 Jan 2019, 19:18
Forum: ESP Easy: Software
Topic: relay go on but after gpio12.0 it will stay on help plz
Replies: 6
Views: 4137

relay go on but after gpio12.0 it will stay on help plz

Comand:
http://192.168.1.6/control?cmd=GPIO,12,1 Turn on my relay but...\
http://192.168.1.6/control?cmd=GPIO,12,0 Don't turn it off :/

Can someone help me to make it work ? I use mqtt and http just for testing. Relay turn off after power then I can turn it on again and can't turn it off :/
by sedini
22 Jan 2019, 18:46
Forum: ESP Easy: Software
Topic: mega-20190116 + relay (openhab)
Replies: 1
Views: 1944

Re: mega-20190116 + relay (openhab)

I manage to get it work but… I use: MQTT Command: “/czujkap/gpio/12” ON Command set to 1 OFF Command set to 0 When I turn switch on in paper ui OH relay turn on but When I switch to off relay stay ON (red light still on) What is the proper way to read status of relay/switch I use now: “/czujkap/gpio...
by sedini
21 Jan 2019, 11:42
Forum: ESP Easy: Software
Topic: mega-20190116 + relay (openhab)
Replies: 1
Views: 1944

mega-20190116 + relay (openhab)

Hello all I have problen with relay (I can't control it) I add switch in espeasy but I cant make it work. below I add my config hope someone help me find solution. in my router I see device name "czujkap-1" maybe I miss that number "1" ? https://ibb.co/tKPFVk4 https://ibb.co/NnsW...
by sedini
19 Jan 2019, 23:22
Forum: uPyEasy: Software
Topic: mega-20190116 +oled +dht11 and ntp
Replies: 1
Views: 9940

mega-20190116 +oled +dht11 and ntp

Hello
I got mega-20190116 on my Nodemcu v3 and
I connect dth11 and have a lot NaN status "DHT : Checksum Error" sometimes I get reading but after that I have again error and Nan status.
I set ntp in advance setting but I got -1h on my time what exactly ntp server I should use ?
by sedini
14 Jan 2019, 20:11
Forum: ESP Easy: Hardware
Topic: nodemcu v3 + sonic sensor HC-SR04 can't get to work
Replies: 5
Views: 5198

Re: nodemcu v3 + sonic sensor HC-SR04 can't get to work

I solve it just use newest mega espeasy software and now its work on vin from node thank You for Your help
by sedini
13 Jan 2019, 22:54
Forum: ESP Easy: Hardware
Topic: nodemcu v3 + sonic sensor HC-SR04 can't get to work
Replies: 5
Views: 5198

nodemcu v3 + sonic sensor HC-SR04 can't get to work

Hello I Flashed nodemcu v3 with ESPEasy_R120_4096.bin after that I configure it to connect wifi and go to: Devices tab >> add new device > chose hc-sr04 After that I connect: trig pin to D7 echo pin to D6 I teake ground from raspberry pi 3 b+ and 5v from raspbery too I still get distance 0 in device...