Search found 32 matches
- 13 May 2019, 15:16
- Forum: ESP Easy: General Discussion
- Topic: How do i make the TaskValueSet of a dummy device persist after reboot
- Replies: 6
- Views: 5205
Re: How do i make the TaskValueSet of a dummy device persist after reboot
Hi, I solved it that way for me. Repeated watchdog reboots permanently delete all shutter positions. I use a Raspbery (I use Raspberymatic for other tasks. the ESP controls "only" the shutters.) and send my data to the controller. After a reboot of the ESP, the Pi receives a message and se...
- 03 May 2019, 11:02
- Forum: ESP Easy: General Discussion
- Topic: How to remote manipulate dummy device value?
- Replies: 4
- Views: 3331
Re: How to remote manipulate dummy device value?
I am very happy that you are happy.
- 02 May 2019, 11:45
- Forum: ESP Easy: General Discussion
- Topic: How to remote manipulate dummy device value?
- Replies: 4
- Views: 3331
Re: How to remote manipulate dummy device value?
Hello Steve,
In a Browser:
X is the Devicenumber.(1 to 12)
YYY,Y is the new Value.
Greetings
Martin
In a Browser:
Code: Select all
http://192.168.100.50/control?cmd=taskvalueset,X,1,YYY.Y
http://192.168.100.50/control?cmd=taskvalueset,X,2,YYY.Y
YYY,Y is the new Value.
Greetings
Martin
- 28 Apr 2019, 11:54
- Forum: ESP Easy: Software
- Topic: (solved - user error) sendto sendhttp no eventvalue data send
- Replies: 2
- Views: 2379
Re: sendto sendhttp no eventvalue data send
Hi, Your information is a bit short. If you do not have a solution, you should describe a few more things. "ACT: sendTo 149, event, disp_kt =" shows that your "[esp01_178_Temp # esp01_178_Temp]" must be incorrect. Otherwise there would have to be a value after "... disp_kt =...
- 13 Apr 2019, 21:29
- Forum: ESP Easy: Software
- Topic: Issue in Rules and sendtohttp
- Replies: 11
- Views: 6427
Re: Issue in Rules and sendtohttp
obviously the "-" in "upnp-org" is a problem. I have replaced it for testing by the ASCII character in percentage representation "%2D". I do not know if that works, because I do not have a vera controller. Then the string is not shared at this point. SendToHTTP 192.168....
- 12 Apr 2019, 01:35
- Forum: RFlink: General Discussions
- Topic: So many questions and no answers ? the forum is dead or not ?
- Replies: 3
- Views: 6041
Re: So many questions and no answers ? the forum is dead or not ?
why so many questions and no answers ? Hi, if you would like to see how many people have read your posts, then you would notice that this forum is not dead. It just does not feel like answering questions of this kind. I have something that does not work the way I want it. Now everyone should be obl...
- 01 Apr 2019, 23:41
- Forum: ESP Easy: Projects / Applications
- Topic: Relay
- Replies: 8
- Views: 6234
Re: Relay
Hi Ro_64 It would be easier to help if you had an idea of what you want to do. What is bo # bo? A switch? When is the condition = "0" given? hum # hum is the water level. OK.What does your relay do? A little more detail would be helpful. Your switch rele is labeled wrong. On the one pictur...
- 31 Mar 2019, 18:47
- Forum: ESP Easy: Software
- Topic: Incorrect pin state in GPIO command status report?
- Replies: 1
- Views: 1657
Re: Incorrect pin state in GPIO command status report?
Hello,
just tested:
The same result I do have when switching to 0.
Probably "state" shows the state before the switching process.
just tested:
Code: Select all
Gpio 0 is OFF
Gpio,0,1
Gpio 0 is now ON. The State is "0"
Again: Gpio,0,1
Now the State is "1"
Probably "state" shows the state before the switching process.
- 29 Mar 2019, 00:56
- Forum: ESP Easy: General Discussion
- Topic: (solved) upload rule remote via json or any other remote script
- Replies: 10
- Views: 5484
Re: (solved) upload rule remote via json or any other remote script
ThomasB do not Sleeping. ThomasB must be an Robot.
- 28 Mar 2019, 22:20
- Forum: ESP Easy: Software
- Topic: New Reboot Cause. What's this?
- Replies: 4
- Views: 3364
Re: New Reboot Cause. What's this?
Thank You,
- 28 Mar 2019, 22:18
- Forum: ESP Easy: Software
- Topic: Reboot, Soft- or Hardware-Problem. My Solution
- Replies: 2
- Views: 2230
Re: Reboot, Soft- or Hardware-Problem. My Solution
Hi, in the next days I will connect my memory oscilloscope to look at the supply voltage. Although the power source should deliver 25W, but that's always only information from the manufacturer. Voltage dips are always possible. I actually see that as the most obvious cause. Now all I have to do is c...
- 28 Mar 2019, 21:57
- Forum: ESP Easy: Software
- Topic: Flash ESPEasy with Arduino IDE -> Missing Library
- Replies: 10
- Views: 10432
Re: Flash ESPEasy with Arduino IDE -> Missing Library
Thank you. As you said, starting with "PlatformIO" is a challenge. Yes. You have to look a little deeper into the system to see all the possibilities. So again a big change for me. But a compiler run without warnings and mistakes compensates for everything. Now I can finally flash my ESP a...
- 28 Mar 2019, 10:05
- Forum: ESP Easy: Software
- Topic: Flash ESPEasy with Arduino IDE -> Missing Library
- Replies: 10
- Views: 10432
Re: Flash ESPEasy with Arduino IDE -> Missing Library
Hi Thomas B,I tried now. PlatformIO has made sure that the last gray hair has turned white now. After I had pushed all the files into the correct folder, it ran on the first attempt to this result. But see the following picture. "SUCCESS". Pictures say more than words. PlatformIO.jpg It wo...
- 27 Mar 2019, 01:44
- Forum: ESP Easy: Software
- Topic: New Reboot Cause. What's this?
- Replies: 4
- Views: 3364
Re: New Reboot Cause. What's this?
Hi, "New" is for me only the reason of the reboot. And the Free Memory and the Free Stack Comments: "sendContentBlocking" and "parseTemplate3" I control 3 shutters. This happens depending on time and temperature. All calculations are done externally in my homematic. Onl...
- 24 Mar 2019, 23:44
- Forum: ESP Easy: Software
- Topic: New Reboot Cause. What's this?
- Replies: 4
- Views: 3364
New Reboot Cause. What's this?
Hello,
New Reboot Cause. What's this?Just ran my ESP 27h without error. Just as I wrote about it, he rebooted, it took longer than usual.
There is something completely new. See the picture. An old and the new main screen summarized.
the left Side are old. The right Side are new.
New Reboot Cause. What's this?Just ran my ESP 27h without error. Just as I wrote about it, he rebooted, it took longer than usual.
There is something completely new. See the picture. An old and the new main screen summarized.
the left Side are old. The right Side are new.
- 24 Mar 2019, 22:59
- Forum: ESP Easy: Software
- Topic: Reboot, Soft- or Hardware-Problem. My Solution
- Replies: 2
- Views: 2230
Reboot, Soft- or Hardware-Problem. My Solution
27 hours without reboot.ESP-12E. Build: mega-ESP_Easy_mega_20190315_dev_ESP8266_4M.bin Lately I've had reboots more and more often. The reason was always the hardware watchdog. Sometimes after an hour. Then I tried a lot to get rid of the cause. Today he already runs 27 hours. It would be good to kn...
- 21 Mar 2019, 17:26
- Forum: ESP Easy: Software
- Topic: event without an event
- Replies: 6
- Views: 3965
Re: event without an event
Hi, I thought the interval only refers to the transfer of data to the controller. (Home Matic). if I now set the interval to 0, the values are no longer transmitted automatically. But here is the second problem. It does not matter which Arduino IDE version or directory structure I use in the librari...
- 20 Mar 2019, 22:34
- Forum: ESP Easy: Software
- Topic: event without an event
- Replies: 6
- Views: 3965
Re: event without an event
I use the mega-20190315
I can set all values, only not 0.
I can set all values, only not 0.
- 20 Mar 2019, 21:17
- Forum: ESP Easy: Software
- Topic: event without an event
- Replies: 6
- Views: 3965
Re: event without an event
I can not set the interval to 0 It is automatically set to 60s.
- 20 Mar 2019, 13:16
- Forum: ESP Easy: Software
- Topic: event without an event
- Replies: 6
- Views: 3965
event without an event
Hi, When will an event be triggered? A simple test: The following device is created. Device.jpg A Rule for the Test: on Testdev#Testvalue do event,RuleIsBeingExecuted endon Here the Log: 150758: EVENT: Testdev#Testvalue=0.00 150879: ACT : event RuleIsBeingExecuted 150892: Command: event 150893: EVEN...
- 15 Mar 2019, 14:25
- Forum: ESP Easy: General Discussion
- Topic: Problems with event call in rules ?
- Replies: 5
- Views: 4086
Re: Problems with event call in rules ?
Hi Lenif, You say: Maybe there is a simple way to do it but it works on build mega-20181101. On the build from 20180305, when I use the button, my sonoff reboot. :( I think the not working version is these: 20190305. (Not 2018) ? Why do not you stay with version 20181101? If everything is going well...
- 12 Mar 2019, 15:24
- Forum: ESP Easy: Software
- Topic: NEXTION075 : WRITE = Timer,3
- Replies: 3
- Views: 2554
Re: NEXTION075 : WRITE = Timer,3
Hi, I tested different things. Just as you can test the status of a gpio with an http query, so i wanted to see what happens when you query a timer. I had not expected to get a result. But the result had already confused me a bit. That was, however, 3 or 4 times repeatable, but never again. Is proba...
- 09 Mar 2019, 10:29
- Forum: ESP Easy: Software
- Topic: ESPEasy Test-Tool Excel DE EN
- Replies: 3
- Views: 2929
Re: ESPEasy Test-Tool Excel DE EN
Hi,
Thank you.
A question. How can the attached pictures in the article be displayed as smaller thumbnails?
Thank you
Thank you.
A question. How can the attached pictures in the article be displayed as smaller thumbnails?
Thank you
- 09 Mar 2019, 01:11
- Forum: ESP Easy: Software
- Topic: Web Forms
- Replies: 1
- Views: 1960
Re: Web Forms
what is my shoe size?
- 09 Mar 2019, 00:50
- Forum: ESP Easy: General Discussion
- Topic: [solved] Are any math functions usable in rules?
- Replies: 11
- Views: 8325
Re: [solved] Are any math functions usable in rules?
Hi, The math functions are a bit confusing. The following examples speak for themselves. TaskValueSet,11,4,465-789 --- = -324 ok TaskValueSet,11,4,45/7-------- = 6,4286 ok TaskValueSet,11,4,3*98 -------- =294 ök TaskValueSet,11,4,2^57 -------- =144115188075855870 18 digits are stored without any pro...
- 09 Mar 2019, 00:19
- Forum: ESP Easy: Software
- Topic: NEXTION075 : WRITE = Timer,3
- Replies: 3
- Views: 2554
NEXTION075 : WRITE = Timer,3
Hi,
I just tried to determine the status of a timer.
The answer to the command:
"http://192.168.1.226/control?cmd=status,Timer=3"
was "NEXTION075: WRITE = Timer, 3".What does that mean?
Best regards
Martin
I just tried to determine the status of a timer.
The answer to the command:
"http://192.168.1.226/control?cmd=status,Timer=3"
was "NEXTION075: WRITE = Timer, 3".What does that mean?
Best regards
Martin
- 09 Mar 2019, 00:07
- Forum: ESP Easy: General Discussion
- Topic: Controlling relays with nodemcu
- Replies: 1
- Views: 1793
Re: Controlling relays with nodemcu
Hi, It's easier and safer to buy a simple charge controller. I just hope you know your way around with batteries. You can not use any relays. Heavy overcharging can cause very large damage to the battery. With deep discharge the battery is irretrievably broken. Depending on the size of the battery, ...
- 08 Mar 2019, 23:19
- Forum: ESP Easy: Software
- Topic: ESPEasy Test-Tool Excel DE EN
- Replies: 3
- Views: 2929
ESPEasy Test-Tool Excel DE EN
Hallo Leute, Ich möchte hier mal ein einfaches Excel-VBA-Tool zum testen meiner ESP-MCU´s vorstellen. Also es betrifft ja eher die ESPEasy-Software. Es ist so möglich, im Hintergrund die Weboberfläche der ESPEasy zu haben, auch mit mehreren Fenstern und im Vordergrund mit Hilfe dieses Excel-Formular...
- 25 Feb 2019, 23:01
- Forum: ESP Easy: Software
- Topic: changed rules format?
- Replies: 6
- Views: 5638
Re: changed rules format?
hello grovkillen, I do not understand why some useless changes are made that I should not use then. These are only for testing, as you say. Who should test them if they only bring problems in existing configurations. I can not even change everything in my rules once a week just to test what you've c...
- 25 Feb 2019, 19:24
- Forum: ESP Easy: Software
- Topic: GPIO via http request - how?
- Replies: 2
- Views: 2143
- 23 Feb 2019, 21:30
- Forum: ESP Easy: Software
- Topic: problem with chrome and rules and chrom cache?
- Replies: 4
- Views: 3433
Re: problem with chrome and rules and chrom cache?
Hello,
I have the same problem under win 10 with firefox, chrome and edge.
is probably a common problem.
who knows the solution?
I have the same problem under win 10 with firefox, chrome and edge.
is probably a common problem.
who knows the solution?
- 18 Feb 2019, 13:51
- Forum: ESP Easy: Software
- Topic: longpulse problem solved
- Replies: 7
- Views: 4946
longpulse problem solved
Hello, sometimes logpulse works, another time not. I have finally got the prolem under control. it had nothing to do with the release for me. I have 8 relays connected. for a time longpulse worked without problems. now no Gpio switched back to the last state. Solution: I have not assigned a gpio out...