Search found 279 matches

by ManS-H
02 Mar 2024, 15:05
Forum: ESP Easy: General Discussion
Topic: general question
Replies: 3
Views: 215

general question

Hello, I have a general question. Thursday I got another package from my provider Ziggo, so different modem a Sagemcom F3896LG. With my previous modem went the combination of 2.4 and 5.0 gb together with extender reasonably well But this combination gives more problems with 2.4 gb units. My question...
by ManS-H
22 Jul 2023, 10:14
Forum: ESP Easy: Projects / Applications
Topic: Replacement for BH1750-in-dome
Replies: 15
Views: 11047

Re: Replacement for BH1750-in-dome

The other 3 lightsensors in the housing still doing their jobs => no need for urgent repair of the BH1750. However, the protecting window of plastic & gaze of the sensors' housing (as shown in 1st message in this thread) has increasingly been discolored & fractured due to prolonged UV/light...
by ManS-H
16 Dec 2022, 12:40
Forum: ESP Easy: Projects / Applications
Topic: SDS011+ESPEasy: which setup is valid?
Replies: 14
Views: 4000

Re: SDS011+ESPEasy: which setup is valid?

The T&H-sensors of Sensirion type SHT3x are good choice (also considering trade-off performance vs. cost), and often used in the 'better' Meteo-systems. SHT4x is the even better variant. SHT3x can be purchased enclosed within protective capsule, which should enable them to survive longer, espec...
by ManS-H
15 Dec 2022, 18:32
Forum: ESP Easy: Projects / Applications
Topic: SDS011+ESPEasy: which setup is valid?
Replies: 14
Views: 4000

Re: SDS011+ESPEasy: which setup is valid?

About the parts which may be broken. The DHT series are for sure a good candidate for replacement, but that's because they always are a good candidate for replacement. Especially the DHT11 is utter garbage. The DHT22 is already infinitely better compared to the DHT11, but still garbage. So in your ...
by ManS-H
06 Oct 2022, 13:25
Forum: ESP Easy: Software
Topic: Is there something changed in the rule system? [SOLVED]
Replies: 2
Views: 2071

Re: Is there something changed in the rule system? [SOLVED]

Forget the whole story, a BIG mistake from myself. I missed a "endon" in my rule.
by ManS-H
06 Oct 2022, 13:06
Forum: ESP Easy: Software
Topic: Is there something changed in the rule system? [SOLVED]
Replies: 2
Views: 2071

Is there something changed in the rule system? [SOLVED]

Is there something changed in the rule system? Now that it is getting fresh I have made the automatic open closing of the toilet window active again. I am working with this version: Build: ESP_Easy_mega_20220427_normal_ESP8266_4M1M Apr 27 2022 This is the rule, on wcraam-open do gpio,15,1 // relay o...
by ManS-H
28 Aug 2022, 12:08
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz [Solved]

TD-er wrote: 28 Aug 2022, 11:53 Great!
And just at the moment I was thinking about actually fixing the CO2-type to Domoticz controllers which is an outstanding issue for the last years...
This is a perfect excuse to procrastinate ;)
This works perfect now. :D
CO2-3.jpg
CO2-3.jpg (37.77 KiB) Viewed 8199 times
by ManS-H
28 Aug 2022, 11:50
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz [Solved]

sendtohttp,username:password@ip,80,.... (or whatever port you need) Or (this is also new) sendtohttp,http://username:password@ip/.... Or if you need to specify the port like 8080: sendtohttp,http://username:password@ip:8080/.... With of course username and password replaced with whatever you've got...
by ManS-H
27 Aug 2022, 20:01
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz

When sending it via rules, you must add credentials, which is only added very recently and which is also what is somewhat breaking the sendtohttp on the last build. Can you try this build from GitHub Actions: https://github.com/letscontrolit/ESPEasy/actions/runs/2925704851 Have you tried to downloa...
by ManS-H
27 Aug 2022, 19:37
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz

Ath wrote: 27 Aug 2022, 18:39 You have to include the authentication and the command in the same request, it doesn't 'stick' after the first one. My example is working like that.
Ik haak af. Even with your line and my ip and user,& password is get this: HTTP : SendToHTTP 192.168.xxx.xx GET... failed HTTP code: 401
by ManS-H
27 Aug 2022, 17:42
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz

...How do I put the username and password in a rule format. I can't find any info on this. I read the discussion with ThomasB on the same question, but then my knowledge falls short. I send some special commands to Domoticz using this type of command: SendToHTTP,192.168.1.xxx,8080,/json.htm?usernam...
by ManS-H
27 Aug 2022, 11:54
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz

There used to be some issue with CO2, at least when using a device in Domoticz defined as CO2 sensor. The CO2 plugin in ESPEasy does send it as nvalue and it should be svalue (or vise verse) That's the reason I've been using the CO2 sensors as "custom" in Domoticz. But that's an issue for...
by ManS-H
26 Aug 2022, 20:27
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz

What Domoticz version are you running? The latest (& greatest)? And you haven't disclosed what type of controller you use, HTTP or MQTT? The latest and i use http I see something strange, have updated 2 units to HEAD_56d3225, 20116 - Mega The data is refreshed with user and password in EspEasy ...
by ManS-H
26 Aug 2022, 19:04
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz

Which build are you using? Since the last build, there is an issue with sending to HTTP, on which I'm working hard to fix. The build from June should not have this issue. I used this build: ESP_Easy_mega_20210223_normal_ESP8266_4M1M I use various builds side by side under the motto "If it work...
by ManS-H
26 Aug 2022, 19:02
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz

A few possibilities: - Password is very long (> 32 characters)? -> Enable 'Use Extended Credentials' and re-enter the password - Made a typo in the Controller Password? -> re-enter the password - Made a typo in the Controller User? -> re-enter the username - Are you using the http port for Domoticz...
by ManS-H
26 Aug 2022, 13:25
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

Re: No transfer to domoticz

A few possibilities: - Password is very long (> 32 characters)? -> Enable 'Use Extended Credentials' and re-enter the password - Made a typo in the Controller Password? -> re-enter the password - Made a typo in the Controller User? -> re-enter the username - Are you using the http port for Domoticz...
by ManS-H
26 Aug 2022, 13:02
Forum: ESP Easy: General Discussion
Topic: No transfer to domoticz [Solved]
Replies: 24
Views: 8372

No transfer to domoticz [Solved]

Hello,

I was very careless not to secure Domoticz with a password.
Now I have secured Domoticz with a username and password and also used this data at the EspEasy Controller page and then did a reboot at the ESP.
But now no data is going to Domoticz.
What am I doing wrong?
by ManS-H
06 Mar 2022, 09:42
Forum: ESP Easy: General Discussion
Topic: Mhz19-C CO2 sensor
Replies: 4
Views: 6102

Re: Mhz19-C CO2 sensor

I have been using a number of Mhz19-B Co2 sensors with Espeasy for some time now to my complete satisfaction. Now I have bought a Mhz19-C, but I can't get it to work, tried with various Espeasy relases. I use a Wemos for this. My question now is, are there other users with a working Mhz19-C? Yours ...
by ManS-H
25 Feb 2022, 18:24
Forum: ESP Easy: Software
Topic: My H801 and build 147
Replies: 2
Views: 6385

Re: My H801 and build 147

Thanks, i wil try it.
by ManS-H
25 Feb 2022, 13:17
Forum: ESP Easy: Software
Topic: My H801 and build 147
Replies: 2
Views: 6385

My H801 and build 147

Hello all,

My H801 Wifi Controller here is still working with ESP Build 147, now I would like to bring it to the latest state. My question, is the H801 still supported? And which version should I use.
by ManS-H
21 Jan 2022, 11:38
Forum: ESP Easy: Hardware
Topic: Blitzwolf BW-SHP6
Replies: 16
Views: 30410

Re: Blitzwolf BW-SHP6

I've got a question about the Blitzwolf BW-SHP6, which version of ESPEasy should I use if I want to make use of all the possibilities of this smartplug?

Greetz, ManS-H
by ManS-H
07 Nov 2021, 18:33
Forum: ESP Easy: Hardware
Topic: Espeasy on M5Stack
Replies: 9
Views: 8470

Re: Espeasy on M5Stack

by ManS-H
31 Oct 2021, 12:32
Forum: ESP Easy: Projects / Applications
Topic: In-soil/Underground application of SHT1x & DS18B20
Replies: 51
Views: 44335

Re: In-soil/Underground application of SHT1x & DS18B20

TD-er wrote: 31 Oct 2021, 11:16 Why are the red covers punctured?
I'm not sure if shrinking tube would be the best suitable for keeping it water tight.
Maybe with teflon tape between it, but just shrinking tube isn't that water tight.
Look here: https://www.allekabels.nl/kabel_accesso ... -lijm.html
by ManS-H
29 Aug 2021, 18:47
Forum: ESP Easy: Software
Topic: Problem with rule for Axa Remote [SOLVED]
Replies: 5
Views: 6165

Re: Problem with rule for Axa Remote [SOLVED]

TD-er wrote: 29 Aug 2021, 15:29 Great :)
I wonder if using a slash will ever lead to issues in an event 'name', but I guess it will not really be a problem.
No problem at all
ESPEasy-1.jpg
ESPEasy-1.jpg (64.82 KiB) Viewed 6143 times
by ManS-H
29 Aug 2021, 13:07
Forum: ESP Easy: Software
Topic: Problem with rule for Axa Remote [SOLVED]
Replies: 5
Views: 6165

Re: Problem with rule for Axa Remote

Thanks TD-er, That was the solution, asyncevent. I control AXA with three relays for each command one relay, so i changed the code a bit. And this works as a charm. on wcraam-open do gpio,0,0 // relay on timerSet 1,2 // 2 seconds timer endon on Rules#Timer=1 do gpio,0,1 // relay off endon on wcraam-...
by ManS-H
29 Aug 2021, 11:28
Forum: ESP Easy: Software
Topic: Problem with rule for Axa Remote [SOLVED]
Replies: 5
Views: 6165

Problem with rule for Axa Remote [SOLVED]

I'm using the Wemos D1 mini to control my Axa Remote by relays. I use the following rules for opening and closing the window. on wcraam-open do gpio,0,0 // relay on timerSet 1,2 // 2 seconds timer endon on Rules#Timer=1 do gpio,0,1 // relay off endon on wcraam-dicht do gpio,5,0 // relay on timerSet ...
by ManS-H
13 May 2021, 12:37
Forum: ESP Easy: General Discussion
Topic: Why is "Git Build:" empty?
Replies: 5
Views: 6486

Re: Question

TD-er wrote: 13 May 2021, 12:34 Then I guess it may have to do with changing the build environments to GitHub Actions from Travis.
This required some changes in the build scripts.

I will have a look at it.
Thanks,
by ManS-H
13 May 2021, 12:29
Forum: ESP Easy: General Discussion
Topic: Why is "Git Build:" empty?
Replies: 5
Views: 6486

Re: Question

TD-er wrote: 13 May 2021, 12:14 Perhaps it was not set in the new build process?
When was this built? (see sysinfo page)
Did you build it yourself?

By the way, nice uptime :)
Nope i download the zip file from Git Hub. But even the latest version has the same problem.
firmware-1.jpg
firmware-1.jpg (38.69 KiB) Viewed 6479 times
firmware-2.jpg
firmware-2.jpg (49.92 KiB) Viewed 6479 times
by ManS-H
13 May 2021, 12:12
Forum: ESP Easy: General Discussion
Topic: Why is "Git Build:" empty?
Replies: 5
Views: 6486

Why is "Git Build:" empty?

Hello, i've got a question about the builds.
20200608 build.jpg
20200608 build.jpg (34.87 KiB) Viewed 6486 times
20210223 build.jpg
20210223 build.jpg (37.43 KiB) Viewed 6486 times
Why is "Git Build:" empty?
by ManS-H
04 May 2021, 13:42
Forum: ESP Easy: Software
Topic: Strange behavior MH-Z19B sensor
Replies: 8
Views: 7971

Re: Strange behavior MH-Z19B sensor [Solved]

I believe my problem is solved since i unchecked the send to controller box. MH-Z19B.jpg Together with this rule, on CO2#PPM do SendToHTTP,192.168.178.53,8080,/json.htm?param=udevice&type=command&idx=4578&nvalue=[CO2#PPM]&svalue=0 endon Now it's works perfect in Domoticz, Air Quality...
by ManS-H
28 Apr 2021, 17:53
Forum: ESP Easy: Hardware
Topic: ESP01S & Latest .bin
Replies: 3
Views: 6821

Re: ESP01S & Latest .bin

I have still three boards working with build 145, works perfect.
ESPEasy_R145_RC6.zip is available.
by ManS-H
20 Apr 2021, 11:17
Forum: ESP Easy: Software
Topic: Strange behavior MH-Z19B sensor
Replies: 8
Views: 7971

Re: Strange behavior MH-Z19B sensor

i would use the air quality sensor in domoticz it's graphs are way better and it actually talks about CO2 this sensor needs the nvalue so you need to use the rules Publish domoticz/in,'{"idx":349,"nvalue":[Slaapkamer#PPM],"svalue":""}' // CO2 sensor in domoti...
by ManS-H
18 Apr 2021, 19:19
Forum: ESP Easy: Software
Topic: Strange behavior MH-Z19B sensor
Replies: 8
Views: 7971

Re: Strange behavior MH-Z19B sensor

TD-er wrote: 18 Apr 2021, 19:06 Use "Custom" sensor type in Domoticz.
That's working fine for over 3 years on my setup.
Ok, thanks.
by ManS-H
18 Apr 2021, 18:23
Forum: ESP Easy: Software
Topic: Strange behavior MH-Z19B sensor
Replies: 8
Views: 7971

Re: Strange behavior MH-Z19B sensor

I wonder why it was working as an air quality sensor in the first place. Domoticz does have a sensor type "CO2", but that one does need "the other" type we're sending (either we're sending the Nvalue and it needs the Svalue or vice verse) so that would not have worked at all. No...
by ManS-H
18 Apr 2021, 11:53
Forum: ESP Easy: Software
Topic: Strange behavior MH-Z19B sensor
Replies: 8
Views: 7971

Strange behavior MH-Z19B sensor

What is best to use in combination ESPEasy and MH-Z19B and Domoticz, air quality or custom sensor? I have two CO2 sensors, the first one worked perfectly with air quality from March 18 to April 7, then it did not constantly refresh the data in Domoticz, now switched to custom sensor. The second one ...
by ManS-H
23 Mar 2021, 19:44
Forum: ESP Easy: Software
Topic: What do i wrong with this rule [Solved]
Replies: 3
Views: 5296

What do i wrong with this rule [Solved]

iron wrote: 23 Mar 2021, 13:17 This works for me :

Code: Select all

  if %systime% > %sunset% or %systime% < %sunrise%
       LongPulse,4,1,%eventvalue1%
  endif
Thanks, it works also for me so the problem is solved.
by ManS-H
23 Mar 2021, 10:13
Forum: uPyEasy: Software
Topic: What do i wrong with this rule
Replies: 2
Views: 12107

Re: What do i wrong with this rule

I made a new request in the correct forum. :D What do i wrong? You could have placed this in the ESPEasy part of the forum :lol: This is not working: On PIR#Motion do // Motion detected: if %systime% > %Sunset% // After 18:48 Sunset ESPEasy currently has a limitation that while parsing the IF line, ...
by ManS-H
23 Mar 2021, 10:11
Forum: ESP Easy: Software
Topic: What do i wrong with this rule [Solved]
Replies: 3
Views: 5296

What do i wrong with this rule [Solved]

New request, now in the correct forum. :D What do i wrong? This rule is working: On PIR#Motion do // Motion detected: if %systime% > 18:48 // After 18:48 Sunset gpio,12,1 // Lamp on timerSet 1,60 // start timer endif if %systime% < 6:30 // Before 6:30 Sunrise gpio,12,1 // Lamp on timerSet 1,60 // st...
by ManS-H
22 Mar 2021, 19:34
Forum: uPyEasy: Software
Topic: What do i wrong with this rule
Replies: 2
Views: 12107

What do i wrong with this rule

What do i wrong? This rule is working: On PIR#Motion do // Motion detected: if %systime% > 18:48 // After 18:48 Sunset gpio,12,1 // Lamp on timerSet 1,60 // start timer endif if %systime% < 6:30 // Before 6:30 Sunrise gpio,12,1 // Lamp on timerSet 1,60 // start timer// endif endOn On Rules#Timer=1 d...
by ManS-H
16 Feb 2021, 14:43
Forum: ESP Easy: Software
Topic: Question about MH-Z19B
Replies: 2
Views: 4253

Re: Question about MH-Z19B

There are some commands available for switching the range. ESPeasy had them before, but I disabled them as it is a very effective way of destroying your factory calibration data. ESPEasy does not limit the range to 2000 ppm, it is the sensor you've got which is set to some range. On older builds it...
by ManS-H
16 Feb 2021, 10:15
Forum: ESP Easy: Software
Topic: Question about MH-Z19B
Replies: 2
Views: 4253

Question about MH-Z19B

Question about MH-Z19B, is there a setting to switch between the following options?
1000 ppm range, 2000 ppm range, 3000 ppm range and 5000 ppm range.

I see when I use firmware ESP_Easy_mega_20210114_normal_ESP8266_4M1M that the range is max 2000 ppm.
And make a new version is for me a bridge to far.
by ManS-H
31 Jan 2021, 18:17
Forum: ESP Easy: General Discussion
Topic: Nice article in Dutch C't magazine
Replies: 1
Views: 3769

Nice article in Dutch C't magazine

Yesterday the postmen bring me the C't-3 magazine. There was a nice article about ESPEasy, https://www.ct.nl/softlink/2103126/
by ManS-H
13 Jun 2020, 15:51
Forum: ESP Easy: Projects / Applications
Topic: ESPEasyRV Electronical Upgrade of a Motorhome
Replies: 65
Views: 101957

Re: ESPEasyRV Electronical Upgrade of a Motorhome

The tank with its (on the road heavily slushing) mass has to be fixed as tight as possible. No way to use these kind of sensors. You can use a flowmeter and count what you use. Another possibility is descripe here: https://www.camperforum.nl/viewtopic.php?t=8457836 Its in Dutch, so you need Google ...
by ManS-H
29 Mar 2020, 11:31
Forum: ESP Easy: Hardware
Topic: LSC Action device support/use status ?
Replies: 12
Views: 12764

Re: LSC Action device support/use status ?

Martinus,

Maybe a stupid question. I see you used R151, but what is the difference between the R145/147 builds and the R151 build?
by ManS-H
20 Mar 2020, 15:44
Forum: ESP Easy: Projects / Applications
Topic: Home Automation Refresh...
Replies: 12
Views: 16726

Re: Home Automation Refresh...

Spring cleanup. :D
by ManS-H
13 Nov 2019, 15:05
Forum: Staff Announcements forum
Topic: BIG announcement, the future of ESP Easy. [READ THIS IF YOU LOVE OUR FW]
Replies: 105
Views: 1455496

Re: BIG announcement, the future of ESP Easy. [READ THIS IF YOU LOVE OUR FW]

Grovkillen and TD-er,

I know your problems with work etc., we hear this now more then a year. But when is the release of a final version?
The last stable is R120, (R147).
ESPEasy.jpg
ESPEasy.jpg (32.17 KiB) Viewed 568997 times
Is this still valid?

Regards, Herman
by ManS-H
27 Sep 2019, 15:38
Forum: ESP Easy: Projects / Applications
Topic: "SmartNodeRules" concept idea
Replies: 37
Views: 23724

Re: "SmartNodeRules" concept idea

As you may have seen on GitHub, I've been very busy trying to free up space and thinking of other sets of plugins to combine, so we have free space for other additions. Can you add this suggestion here: https://github.com/letscontrolit/ESPEasy/issues/2590 Would be great if letscontrolit could provi...
by ManS-H
20 Aug 2019, 17:13
Forum: ESP Easy: Hardware
Topic: New hackable ESP gadgets in local budget store "action" !!!
Replies: 112
Views: 241545

Re: New hackable ESP gadgets in local budget store "action" !!!

FanOfHue wrote: 20 Aug 2019, 15:02 The doorsensor has also been migrated to a SmartNode with custom firmware.
Can you told use how to flash the firmware? Open the device, soldering wires etc, with a few pictures should be nice. :D
by ManS-H
16 Aug 2019, 18:21
Forum: ESP Easy: Hardware
Topic: Support for Wifi Irrigation Timer
Replies: 8
Views: 13114

Re: Support for Wifi Irrigation Timer

Good question... I don't know. I must to stop it before because actually it's in the garden and is in use... I'll let you know... I didn't find anything about this unit. Go for a diy solution with a Wemos and a valve. Then you have full control. Look here: https://www.letscontrolit.com/forum/viewto...
by ManS-H
16 Aug 2019, 16:01
Forum: ESP Easy: Hardware
Topic: Support for Wifi Irrigation Timer
Replies: 8
Views: 13114

Re: Support for Wifi Irrigation Timer

Hi ManS-H, Thanks for taking time to respond to me, it's very nice. That's right, this the same product !!! :D :D :D :D :D https://ae01.alicdn.com/kf/HTB1DvrQXsTxK1Rjy0Fgq6yovpXar/WIFI-Automatic-Garden-Water-Timers-Garden-Irrigation-Controller-Phone-Remote-Control-Garden-Watering-System-Water-Timer...