Search found 247 matches

by ManS-H
18 Apr 2021, 19:19
Forum: ESP Easy: Software
Topic: Strange behavior MH-Z19B sensor
Replies: 4
Views: 38

Re: Strange behavior MH-Z19B sensor

TD-er wrote: 18 Apr 2021, 19:06 Use "Custom" sensor type in Domoticz.
That's working fine for over 3 years on my setup.
Ok, thanks.
by ManS-H
18 Apr 2021, 18:23
Forum: ESP Easy: Software
Topic: Strange behavior MH-Z19B sensor
Replies: 4
Views: 38

Re: Strange behavior MH-Z19B sensor

I wonder why it was working as an air quality sensor in the first place. Domoticz does have a sensor type "CO2", but that one does need "the other" type we're sending (either we're sending the Nvalue and it needs the Svalue or vice verse) so that would not have worked at all. No...
by ManS-H
18 Apr 2021, 11:53
Forum: ESP Easy: Software
Topic: Strange behavior MH-Z19B sensor
Replies: 4
Views: 38

Strange behavior MH-Z19B sensor

What is best to use in combination ESPEasy and MH-Z19B and Domoticz, air quality or custom sensor? I have two CO2 sensors, the first one worked perfectly with air quality from March 18 to April 7, then it did not constantly refresh the data in Domoticz, now switched to custom sensor. The second one ...
by ManS-H
23 Mar 2021, 19:44
Forum: ESP Easy: Software
Topic: What do i wrong with this rule [Solved]
Replies: 3
Views: 828

What do i wrong with this rule [Solved]

iron wrote: 23 Mar 2021, 13:17 This works for me :

Code: Select all

  if %systime% > %sunset% or %systime% < %sunrise%
       LongPulse,4,1,%eventvalue1%
  endif
Thanks, it works also for me so the problem is solved.
by ManS-H
23 Mar 2021, 10:13
Forum: uPyEasy: Software
Topic: What do i wrong with this rule
Replies: 2
Views: 802

Re: What do i wrong with this rule

I made a new request in the correct forum. :D What do i wrong? You could have placed this in the ESPEasy part of the forum :lol: This is not working: On PIR#Motion do // Motion detected: if %systime% > %Sunset% // After 18:48 Sunset ESPEasy currently has a limitation that while parsing the IF line, ...
by ManS-H
23 Mar 2021, 10:11
Forum: ESP Easy: Software
Topic: What do i wrong with this rule [Solved]
Replies: 3
Views: 828

What do i wrong with this rule [Solved]

New request, now in the correct forum. :D What do i wrong? This rule is working: On PIR#Motion do // Motion detected: if %systime% > 18:48 // After 18:48 Sunset gpio,12,1 // Lamp on timerSet 1,60 // start timer endif if %systime% < 6:30 // Before 6:30 Sunrise gpio,12,1 // Lamp on timerSet 1,60 // st...
by ManS-H
22 Mar 2021, 19:34
Forum: uPyEasy: Software
Topic: What do i wrong with this rule
Replies: 2
Views: 802

What do i wrong with this rule

What do i wrong? This rule is working: On PIR#Motion do // Motion detected: if %systime% > 18:48 // After 18:48 Sunset gpio,12,1 // Lamp on timerSet 1,60 // start timer endif if %systime% < 6:30 // Before 6:30 Sunrise gpio,12,1 // Lamp on timerSet 1,60 // start timer// endif endOn On Rules#Timer=1 d...
by ManS-H
16 Feb 2021, 14:43
Forum: ESP Easy: Software
Topic: Question about MH-Z19B
Replies: 2
Views: 1290

Re: Question about MH-Z19B

There are some commands available for switching the range. ESPeasy had them before, but I disabled them as it is a very effective way of destroying your factory calibration data. ESPEasy does not limit the range to 2000 ppm, it is the sensor you've got which is set to some range. On older builds it...
by ManS-H
16 Feb 2021, 10:15
Forum: ESP Easy: Software
Topic: Question about MH-Z19B
Replies: 2
Views: 1290

Question about MH-Z19B

Question about MH-Z19B, is there a setting to switch between the following options?
1000 ppm range, 2000 ppm range, 3000 ppm range and 5000 ppm range.

I see when I use firmware ESP_Easy_mega_20210114_normal_ESP8266_4M1M that the range is max 2000 ppm.
And make a new version is for me a bridge to far.
by ManS-H
31 Jan 2021, 18:17
Forum: ESP Easy: General Discussion
Topic: Nice article in Dutch C't magazine
Replies: 1
Views: 1641

Nice article in Dutch C't magazine

Yesterday the postmen bring me the C't-3 magazine. There was a nice article about ESPEasy, https://www.ct.nl/softlink/2103126/
by ManS-H
13 Jun 2020, 15:51
Forum: ESP Easy: Projects / Applications
Topic: ESPEasyRV Electronical Upgrade of a Motorhome
Replies: 65
Views: 51378

Re: ESPEasyRV Electronical Upgrade of a Motorhome

The tank with its (on the road heavily slushing) mass has to be fixed as tight as possible. No way to use these kind of sensors. You can use a flowmeter and count what you use. Another possibility is descripe here: https://www.camperforum.nl/viewtopic.php?t=8457836 Its in Dutch, so you need Google ...
by ManS-H
29 Mar 2020, 11:31
Forum: ESP Easy: Hardware
Topic: LSC Action device support/use status ?
Replies: 12
Views: 7918

Re: LSC Action device support/use status ?

Martinus,

Maybe a stupid question. I see you used R151, but what is the difference between the R145/147 builds and the R151 build?
by ManS-H
20 Mar 2020, 15:44
Forum: ESP Easy: Projects / Applications
Topic: Home Automation Refresh...
Replies: 12
Views: 11312

Re: Home Automation Refresh...

Spring cleanup. :D
by ManS-H
13 Nov 2019, 15:05
Forum: Staff Announcements forum
Topic: BIG announcement, the future of ESP Easy. [READ THIS IF YOU LOVE OUR FW]
Replies: 103
Views: 909312

Re: BIG announcement, the future of ESP Easy. [READ THIS IF YOU LOVE OUR FW]

Grovkillen and TD-er,

I know your problems with work etc., we hear this now more then a year. But when is the release of a final version?
The last stable is R120, (R147).
ESPEasy.jpg
ESPEasy.jpg (32.17 KiB) Viewed 383424 times
Is this still valid?

Regards, Herman
by ManS-H
27 Sep 2019, 15:38
Forum: ESP Easy: Projects / Applications
Topic: "SmartNodeRules" concept idea
Replies: 37
Views: 12116

Re: "SmartNodeRules" concept idea

As you may have seen on GitHub, I've been very busy trying to free up space and thinking of other sets of plugins to combine, so we have free space for other additions. Can you add this suggestion here: https://github.com/letscontrolit/ESPEasy/issues/2590 Would be great if letscontrolit could provi...
by ManS-H
20 Aug 2019, 17:13
Forum: ESP Easy: Hardware
Topic: New hackable ESP gadgets in local budget store "action" !!!
Replies: 111
Views: 126318

Re: New hackable ESP gadgets in local budget store "action" !!!

FanOfHue wrote: 20 Aug 2019, 15:02 The doorsensor has also been migrated to a SmartNode with custom firmware.
Can you told use how to flash the firmware? Open the device, soldering wires etc, with a few pictures should be nice. :D
by ManS-H
16 Aug 2019, 18:21
Forum: ESP Easy: Hardware
Topic: Support for Wifi Irrigation Timer
Replies: 8
Views: 9519

Re: Support for Wifi Irrigation Timer

Good question... I don't know. I must to stop it before because actually it's in the garden and is in use... I'll let you know... I didn't find anything about this unit. Go for a diy solution with a Wemos and a valve. Then you have full control. Look here: https://www.letscontrolit.com/forum/viewto...
by ManS-H
16 Aug 2019, 16:01
Forum: ESP Easy: Hardware
Topic: Support for Wifi Irrigation Timer
Replies: 8
Views: 9519

Re: Support for Wifi Irrigation Timer

Hi ManS-H, Thanks for taking time to respond to me, it's very nice. That's right, this the same product !!! :D :D :D :D :D https://ae01.alicdn.com/kf/HTB1DvrQXsTxK1Rjy0Fgq6yovpXar/WIFI-Automatic-Garden-Water-Timers-Garden-Irrigation-Controller-Phone-Remote-Control-Garden-Watering-System-Water-Timer...
by ManS-H
16 Aug 2019, 12:36
Forum: ESP Easy: Hardware
Topic: Support for Wifi Irrigation Timer
Replies: 8
Views: 9519

Re: Support for Wifi Irrigation Timer

Hi HomeJCL, thanks for your return... The problem is i bought this product yet before i know the forum (lets control it).... So now i have it, i don't want to use it with Cloud Chinese ! I want to manage it in local area (Lan)... Thanks Interrupteur Is this the same product: https://www.banggood.co...
by ManS-H
08 Aug 2019, 10:15
Forum: ESP Easy: General Discussion
Topic: Hardware Watchdog Reboots
Replies: 219
Views: 90983

Re: Hardware Watchdog Reboots

My question, is this a normal situation? Nice to see the 97 day uptime on your old June-2018 core_2_4_1 build. With the 2.4.1 core, and up to the mid-2018 time frame, reliable run times were achieved by most users. I fondly remember those good old days. - Thomas Thanks for the reply. I used this ve...
by ManS-H
07 Aug 2019, 22:23
Forum: ESP Easy: General Discussion
Topic: Hardware Watchdog Reboots
Replies: 219
Views: 90983

Re: Hardware Watchdog Reboots

Hello,
I dont not really how the Watchdog works.
This is my firmware:
'
Watchdog-1.jpg
Watchdog-1.jpg (41.37 KiB) Viewed 14348 times
And this is what i see:
Watchdog-2.jpg
Watchdog-2.jpg (29.73 KiB) Viewed 14348 times
My question, is this a normal situation?
by ManS-H
27 Jul 2019, 12:19
Forum: ESP Easy: General Discussion
Topic: Problem with Wemos D1 pro mini
Replies: 33
Views: 15709

Re: Problem with Wemos D1 pro mini

It looks that module is ready for the bin.

Maybe a last chance, try other firmware, for example Tasmota. I know its not the right forum to promote is. But then you are sure it's a damaged module.
by ManS-H
27 Jul 2019, 10:03
Forum: ESP Easy: General Discussion
Topic: Problem with Wemos D1 pro mini
Replies: 33
Views: 15709

Re: Problem with Wemos D1 pro mini

I tried R120, mega-20190607 and another mega also but same behaviour. If I did mega flashing right..? I used Espeasy flasher, just picked 4M normal bin and no other changes in flasher. At least it it didn't gave me error messages. Did you use first blank_4MB.bin before you flash another version?
by ManS-H
25 Jul 2019, 12:18
Forum: ESP Easy: General Discussion
Topic: Problem with Wemos D1 pro mini
Replies: 33
Views: 15709

Re: Problem with Wemos D1 pro mini

Little more info. I noticed that computer got connection for few seconds and even gets ipaddress but after that connection disconnects. Is card faulty ? Clean the memory with blank_4MB.bin after that try to install the ESPEasy firmware again. Personal i used the FlashESP8266.exe for flash the firmw...
by ManS-H
24 Jul 2019, 23:00
Forum: ESP Easy: General Discussion
Topic: Problem with Wemos D1 pro mini
Replies: 33
Views: 15709

Re: Problem with Wemos D1 pro mini

Its configesp
by ManS-H
21 Jun 2019, 09:58
Forum: Introduce yourself
Topic: introduction
Replies: 1
Views: 2894

Re: introduction

Your're welcome here.
by ManS-H
18 May 2019, 18:57
Forum: ESP Easy: Hardware
Topic: ESP32 CAM
Replies: 11
Views: 11925

Re: ESP32 CAM

Looks good, and a nice price for the whole set.
https://www.aliexpress.com/item/ESP32-C ... 63411.html
by ManS-H
18 Apr 2019, 17:50
Forum: ESP Easy: Software
Topic: What can users do to make ESPEasy more attractive.
Replies: 16
Views: 5605

What can users do to make ESPEasy more attractive.

Bear in mind that this "someone" is me and TD-er, we're only two people with everyday life. My money is out and my energy is almost out. All these suggestions are good but feel free to pitch in in ANY way or form. Good intentions isn't good enough. @ ManS-H you may change the title if you...
by ManS-H
17 Apr 2019, 11:40
Forum: ESP Easy: Software
Topic: What can users do to make ESPEasy more attractive.
Replies: 16
Views: 5605

Re: OTA updates on 1MB devices

We are not doing it because lack of funding. We are pursuing money be helping companies use ESP Easy. They are mostly using 4MB and bigger... We simply need to get cash to put food on the table. I'm $4000 minus from trying to get this rolling as a company. Call me stupid, I will not argue with you,...
by ManS-H
16 Apr 2019, 20:29
Forum: ESP Easy: Software
Topic: What can users do to make ESPEasy more attractive.
Replies: 16
Views: 5605

What can users do to make ESPEasy more attractive.

Its a pity that the latest builds not working with OTA with devices with 1MB memory, only a two step. There are a lot of devices that makes the work at home easy, they dont need fancy firmware. In my case i have Sonoff, Neo Coolcam and BlitzWolf BW-SHP6 devices. The latest two i have flashed with &q...
by ManS-H
26 Mar 2019, 20:58
Forum: ESP Easy: General Discussion
Topic: Sonoff Basic and latest versions of ESP firmware
Replies: 6
Views: 2952

Re: Sonoff Basic and latest versions of ESP firmware

My Sonoff Basic: I think message " ESP_Easy_0, connected, no internet" is correct. ESPeasy is in AP mode ( and without internet connection of course ) You must connect to it ( 192.168.4.1 ) and set your wifi network SSID and password. Yes, you have right, that the normal situation. But in...
by ManS-H
25 Mar 2019, 16:48
Forum: ESP Easy: General Discussion
Topic: Sonoff Basic and latest versions of ESP firmware
Replies: 6
Views: 2952

Re: Sonoff Basic and latest versions of ESP firmware

Can you give a very short summary of what is working and what isn't? As I read it, you could make it to work with the last build? But what did you do differently compared to the first attempt? I can made it works with the ESPlorer, but not as normal with 192.168.4.1 When i flash ESP_Easy_mega-20190...
by ManS-H
25 Mar 2019, 16:26
Forum: ESP Easy: General Discussion
Topic: Sonoff Basic and latest versions of ESP firmware
Replies: 6
Views: 2952

Re: Sonoff Basic and latest versions of ESP firmware

Have you made a blank flash in-between? The settings have been refactored... Yep, first i cleaned up with blank_1MB I tried it again, first i used blank_1MB, then ESP_Easy_mega-20190315_normal_ESP8266_1M, I controlled the process with ESPplorer. I see on my telephone ESP_Easy-0, connected, no inter...
by ManS-H
25 Mar 2019, 11:59
Forum: ESP Easy: General Discussion
Topic: Sonoff Basic and latest versions of ESP firmware
Replies: 6
Views: 2952

Sonoff Basic and latest versions of ESP firmware

Hello, Last week i was busy with my two Sonoff-Basic modules. I put the version ESP_Easy_mega-20190121_normal_ESP8266_1024 on it. Problems with connecting on Wifi. Then i tried the version ESP_Easy_mega-20190315_normal_ESP8266_1M, same problems. Then i go back to a very old version, ESPEasy_R147_102...
by ManS-H
25 Mar 2019, 10:49
Forum: uPyEasy: General Discussion
Topic: AurAir Launched!!!
Replies: 7
Views: 11511

Re: AurAir Launched!!!

I wish you a lot of success,
by ManS-H
22 Feb 2019, 20:50
Forum: ESP Easy: Software
Topic: P141 RGB Strip Plugin
Replies: 62
Views: 35347

Re: P141 RGB Strip Plugin

Hi, added two bin files with P141. One for 1MB and the other for 4MB flash. Hope that helps. BTW. I don't use ESPEasy for LED strips anymore although I love its flexibility. Tasmota has a much better implementation for this IMHO. This plugin flickers a lot in low dimming settings and it has no fadi...
by ManS-H
08 Jan 2019, 19:05
Forum: ESP Easy: Projects / Applications
Topic: USB charger, & nightlight fitted with Wemos D1 Mini project
Replies: 11
Views: 4515

Re: USB charger, & nightlight fitted with Wemos D1 Mini project

Tecumseh wrote: 08 Jan 2019, 17:01 I was hoping you would give me a store in the Netherlands :D
Look here: https://www.action.com/nl-nl/nl/multime ... e--tablet/ and then look at : Duo-USB wandlader

Succes, Herman
by ManS-H
17 Dec 2018, 17:55
Forum: ESP Easy: General Discussion
Topic: DNS ESPEasy
Replies: 2
Views: 1628

Re: DNS ESPEasy

Thanks for your answer.

Herman
by ManS-H
15 Dec 2018, 20:08
Forum: ESP Easy: General Discussion
Topic: DNS ESPEasy
Replies: 2
Views: 1628

DNS ESPEasy

Maybe a simple question. When i look in the tab "Config" i fill under IP Settings my DNS: 8.8.8.8
dns-1.jpg
dns-1.jpg (3.39 KiB) Viewed 1628 times
When i go to the tab "Tools, Info" I see also a place for a second dns.
dns-2.jpg
dns-2.jpg (3.38 KiB) Viewed 1628 times
Where can i fill that second dns?
I work with version: mega-20181124
by ManS-H
21 Nov 2018, 19:31
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

You're welcome, good to hear it works. [...] When i start the Sonoff Pow from Domoticz and i will stop it on the Nextion i must sometimes press the button twice. That's depend of the state of the variable on the Nextion. [...] I have already seen a similar behaviour of my Netxion. I think its a tim...
by ManS-H
21 Nov 2018, 12:58
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

Thanks Wiki, Yesterday morning i found the same solution with the trail and error method. It works for me good enough. I saw the same thing with working with your code and my code. When i start the Sonoff Pow from Domoticz and i will stop it on the Nextion i must sometimes press the button twice. Th...
by ManS-H
19 Nov 2018, 21:25
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

When i With Domoticz switch on/off the Sonoff Pow it works fine, it shows on the display the correct state. Do i the same on the Nextion same result Pow on/ff and on the nextion the correct state. When i switch on the Pow on Domoticz and off on the Nextion the Pow switched directly on again. I belie...
by ManS-H
18 Nov 2018, 14:22
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

On theWemos with the Nextion display, IP: 192.168.178.127 i use this rule: On RelayState do if %eventvalue%=0 SendToHTTP 192.168.178.127,80,/control?cmd=NEXTION,page0.bt0.val=0 SendToHTTP 192.168.178.127,80,/control?cmd=GPIO,12,0 else SendToHTTP 192.168.178.127,80,/control?cmd=NEXTION,page0.bt0.val...
by ManS-H
17 Nov 2018, 20:15
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

I'm a bit confused, but here's what I think is going on. 1. The Nextion is wired to the ESP12 and has IP address 192.168.178.xxx. 2. The Relay is on ESP01 and has IP address 192.168.178.127. 3. The ESP12's rule is sending the NEXTION http command to the ESP01. This is not what is wanted because the...
by ManS-H
17 Nov 2018, 16:06
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

OK, lets go. There might be a smarter solution, but I would go through rules. I assume that you have the domoticz configured as MQTT-controller in your ESP12. I assume that you have define a dual-state button in Nextion. If not already done so, define the gpio port of the relay as a device, an exam...
by ManS-H
14 Nov 2018, 10:51
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

Wiki wrote: 14 Nov 2018, 00:43 Is the Nextion connected to the same device which is switching the lights or are these two different devices? Or are the lights switched by three different devices?
Nextion has his own device, a Wemos D1 mini, The table lamp has a ESP01 and Domoticz a Raspberry Pi
by ManS-H
13 Nov 2018, 11:17
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

In general its no problem to show every information you desire on the Nextion using some rules. But to get help you should provide more information about the infrastructure you are using. My situation, i have three table lights with a ESP01 and ESPEasy build 145. I switched they on/off with Domotic...
by ManS-H
09 Nov 2018, 16:21
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

First I added two variables va0 and va1 and unchecked the Send Component ID of Bt0, b0 and down buttons. Next I put some code under the buttons: Under Tough Release Event of bt0: if(va1.val==0) { va1.val=1 print "|s,i99,sOn" printh 0a }else { va1.val=0 print "|s,i99,sOff" printh...
by ManS-H
03 Nov 2018, 14:34
Forum: ESP Easy: Software
Topic: ESP Easy and BME280 data
Replies: 6
Views: 3825

Re: ESP Easy and BME280 data

I finally upgraded all my esp8266 boards with the latest ESP Easy software. I'm using the BME280 devices and viewing the LOG option from the TOOLS tab, to view the data from the sensor. I notice it is giving me a Dew Point reading along with the Temp, Humidity, and Pressure. In the Device Setup tab...
by ManS-H
01 Nov 2018, 16:31
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 495
Views: 291107

Re: Nextion display plugin

What you have done is absolutely correct. Talking to the Nextion using the Nextion-plugin is really that simple - if you do have a working serial communication. Check your wiring twice and triple, assure you have connected GND ESP and GND Nextion, use baudrate 9600, disable serial communication in ...