Search found 15 matches
- 22 Feb 2022, 21:27
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 9174661
Re: Support for PZEM 004T Energy monitor
hat I could see that it sends kwh even if the value is below 10kwh I check on my side, and it seems you are right !: I reset energy, and wait 1h at about 2000W => Energy=1.907. I verify my code but no specific calculation on my side to convert Wh into kWh. So it's on PZEM side. At least I'm not cra...
- 18 Feb 2022, 09:05
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 9174661
Re: Support for PZEM 004T Energy monitor
- 17 Feb 2022, 13:04
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 9174661
Re: Support for PZEM 004T Energy monitor
Hello.
I just found out that he displays KWh at Wh.
so Energy_WH:6.7 is actual = Energy_Kwh:6.7...
I tested with a parallel analog meter.
I just found out that he displays KWh at Wh.
so Energy_WH:6.7 is actual = Energy_Kwh:6.7...
I tested with a parallel analog meter.
- 16 Feb 2022, 08:46
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 9174661
Re: Support for PZEM 004T Energy monitor
I've change from N to L and I think he's measuring right now. The manual was with N wire...blody hell In the book it says that I have to put N. I saw a previous post in which there was a diagram on L and I said to try. I thought it was dubious that he was recording N 1. It should be on L (but no con...
- 15 Feb 2022, 12:36
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 9174661
Re: Support for PZEM 004T Energy monitor
Answer for the questions: 1. it's the round one, it's on the single wire. N wire 2. 130W it's from the Server display. the max power is 500w but it stays at 130W 3. 3 days has passed and i have the following data: Voltage_V:234.8 Current_A:1.6 Power_W:300.9 Energy_WH:18.3 Power it should be 373.44 ....
- 13 Feb 2022, 09:20
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 9174661
Re: Support for PZEM 004T Energy monitor
But something is not right and I don't know how to test it. How it's possible to consume in 24 hours just 308.35Wh? I have a server that consumes 130w. a switch with 50W, some lights and a laptop. It's there a way to check it? Thanks! Also, does espeasy store the last value in case of a power failure?
- 12 Feb 2022, 08:55
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 9174661
Re: Support for PZEM 004T Energy monitor
Hello, Can someone explain to me something about the PZEM? The value from Energy_WH it's the total consumption from the beginning of the device till the present? If i want to see all the power used from Day1 to Day2, i need to make the sum from day1 to day2. do I have to reduce the consumption of da...
- 08 May 2019, 18:46
- Forum: ESP Easy: Software
- Topic: [SOLVED] Switch cotrol + openhab
- Replies: 2
- Views: 2933
Re: Switch cotrol + openhab
Sorry, i forgot to close this topic.
I used an NPN Transistor (NPN 2N3904) for controlling the relay, and I used these schematic.
Thank you
I used an NPN Transistor (NPN 2N3904) for controlling the relay, and I used these schematic.
Thank you
- 08 May 2019, 16:40
- Forum: ESP Easy: Software
- Topic: Espeasy and openhab - NEED HELP, PLEASE
- Replies: 12
- Views: 10876
Re: Espeasy and openhab - NEED HELP, PLEASE
Thank you very much! i will test with another ESP. For the ESP i posted...i managed to make him to work...it was a problem in the OpenHab..yeeyy and now it works <3 it is a wat that i can send to OH2 the state of the relay? This is the IF Code for switch on lightSwitch#Switch=1 do if [lightState#Swi...
- 08 May 2019, 13:26
- Forum: ESP Easy: Software
- Topic: Espeasy and openhab - NEED HELP, PLEASE
- Replies: 12
- Views: 10876
Re: Espeasy and openhab - NEED HELP, PLEASE
I would be more than happy if you can show me examples for the new setup. <3
Thanks a lot! <3
Thanks a lot! <3
- 07 May 2019, 23:34
- Forum: ESP Easy: Software
- Topic: Espeasy and openhab - NEED HELP, PLEASE
- Replies: 12
- Views: 10876
Re: Espeasy and openhab - NEED HELP, PLEASE
I also have one more question.
It's possible to sink the EspEasy, relay state with OpenHab? Because if I switch the light on from the physical button i can't see it on the OpenHab if it's ON of OFF.
It's possible to sink the EspEasy, relay state with OpenHab? Because if I switch the light on from the physical button i can't see it on the OpenHab if it's ON of OFF.
- 07 May 2019, 23:24
- Forum: ESP Easy: Software
- Topic: Espeasy and openhab - NEED HELP, PLEASE
- Replies: 12
- Views: 10876
Re: Espeasy and openhab - NEED HELP, PLEASE
It was from my OH2...).. I reinstalled the operation system and now it works..
What's the new mqtt? it's something much better than EasyEsp? I am a beginner in this thing and i want to learn more things
What's the new mqtt? it's something much better than EasyEsp? I am a beginner in this thing and i want to learn more things
- 07 May 2019, 07:34
- Forum: ESP Easy: Software
- Topic: Espeasy and openhab - NEED HELP, PLEASE
- Replies: 12
- Views: 10876
Re: Espeasy and openhab - NEED HELP, PLEASE
Thank you for the help. Here are the screenshots from the mqtt. MQTT Broker, you mean the hosting server? If yes, it's on the same machine. I can't see in the MQTT Binding the version 1.x just the new one.. :( http://icey.go.ro/photo/1.PNG http://icey.go.ro/photo/2.PNG http://icey.go.ro/photo/3.PNG ...
- 06 May 2019, 21:16
- Forum: ESP Easy: Software
- Topic: Espeasy and openhab - NEED HELP, PLEASE
- Replies: 12
- Views: 10876
Espeasy and openhab - NEED HELP, PLEASE
Hello, I set up the ESP with the openhab to control a switch. I don't know why it doesn't work. home.sitemap Frame label="MQTT Test"{ Switch item=LampaBanc label="LED" icon="light" } home.items Switch LampaBanc {mqtt=">[localbroker:/LampaBanc/gpio/5:1.00],>[localbr...
- 01 May 2019, 00:39
- Forum: ESP Easy: Software
- Topic: [SOLVED] Switch cotrol + openhab
- Replies: 2
- Views: 2933
[SOLVED] Switch cotrol + openhab
Hello, First of all, I wanted to say that I am new in "smart-house" family... I am doing this to learn new things and they are awweesssommee I managed to make a hardware lamp. It's an esp8266 esp 12 that controls a light. with ESP Easy 120. I have some problems here. I managed to make the ...