works with
ESP_Easy_mega_20200801_hard_SONOFF_POW_4M1M.bin

a question: what is the value " Pulses"
thank you

i deactivated the serial port ... but it doesn't work anyway

in fact, with Tasmota it works regularly
.... I wanted the same with Espeasy

Hello
Sonoff POW R3
I tried the latest espeasy builds (example ESP_Easy_mega_20220616_hard_SONOFF_POW_4M1M)
setting
Energy (AC) - CSE7766 (POW r2) [TESTING]
Energy (AC) - HLW8012 / BL0937 [TESTING]
but I have no value
Maybe the POW R3 is not supported?

this is the old JSON exact http://192.168.1.43/json?tasknr=1 {"System":{ "Name":"ESP_Easy","Unit":0,"Build":20100,"Git Build":"mega-20180220","Local time":"1970-00-00 00:00:00","Uptime":1376,"Fre...

this is the old JSON

http://192.168.1.43/json?tasknr=1

Hello this is the script I use to monitor temperature and humidity (I use a raspberry .... see metern.org) with a DHT22 sensor, with the old JSON format } elseif ($argv[1] == 'temp-scant') { $url = 'http://192.168.1.43/json?tasknr=1'; $pagina = file_get_contents($url); $json_output = json_decode($pa...

Hello
I ask if it is possible to create a rule ... that when the measures are "nan" ... the previous valid value is considered

..from the web log viewer

i tried the build ESP_Easy_mega-20181214_normal_ESP8285_1024 now DHT: Checksum Error interval = 60 sec 181882: WD : Uptime 3 ConnectFailures 0 FreeMem 15632 211882: WD : Uptime 4 ConnectFailures 0 FreeMem 17200 231920: DHT : Checksum Error 241882: WD : Uptime 4 ConnectFailures 0 FreeMem 17200 271882...

I have tried various intervals from 2 to 120 seconds ... but nothing changes
In advanced I have deselected serial ... otherwise I would not see any measurement

very short wire length 15 cm
connections ok.....solderings ok
used Gpio 1 and 3


but cyclically...DHT Protocol Timeout

... I tried the sensor with
ESP_Easy_mega_20210223_normal_ESP8285_1M
..the measures are there, but then ..nan ... then again ok..ecc.

from log
DHT: Protocol Timeout

Hello, I use sonoff basic with 20000 - Mega v2.0.0-dev13 I connected the sensor to the Gpio 14 with 10 k pul-up resistor (at the moment I don't have the capacitor) device = DHT 11-12-22 DHT type DHT 12 ..but it doesn't work --- nan i also tried the gpio 1 and 3, but it doesn't work I tried on other ...

Hello,
is it possible to use the Sonoff SI7021 sensor with jack on a basic sonoff (3 wires .... Vcc-Gnd-Data) ??
... I tried it .. but without success .... measures = nan

thank you

thank you very much

... can I post the scripts here?

Hello, i have a basic sonoff with ESPEasy_v2.0.0-dev11 with Pulse Counter and DS18b20 devices that I use to monitor water consumption and outside temperature its json output is {"System":{ "Build": 20000, "Unit": 1, "Uptime": 4534, "Free RAM": 22008 ...

Ath wrote: ↑03 Jan 2021, 10:14 Do you have any log results from both ESPEasy and Telegram?
The link you provided complaints that field "description" is missing, so you probably need to adjust that.

the link from the browser works fine ..

thanks for the help, I will try other solutions

use

https://api.telegram.org/botxxxxxxxx/se ... t_id=xxxxx
& text = xxxxx

for telegram notifications, but on espeasy it doesn't work

hi, i would like a rule on pulse counter
..when the Count value is> of a set threshold and remains for a set time ... sends a Telegram notification.
it would be possible ?
Thanks for your help

.....My suggestion,
at 00.01
read the value
and
subtract that value.....


.......I do not know how to do...

I can get help

thank you

OK thank you very much

in the post above I read:
TaskValueSet 4.3, [test # a] - [test # b]

but I didn't understand what to do

that's what I already do, reboot at 00:01, but I'd like to avoid this

Total value does not change

I tried but it doesn't work
log:
60867434: ACT: TaskValueSet, 1,2,0
60867446: ACT: TaskRun, 1
60867475: EVENT: counter # Count = 0.00
60867503: EVENT: counter # Total = 344.75
60867536: EVENT: counter # Time = 1245007.00
60876994: WD: Uptime 1011 ConnectFailures 0 FreeMem

there are no spaces in image my device https://drive.google.com/file/d/1ZiPhKfMMBYa2Inbci2Nj1blF_RzdgXug/view then On Clock#Time=All,12:09 Do TaskValueSetAndRun,1,2,0 EndOn it's correct ? the "TaskValueSetAndRun" command, should change the "Total" value of my device to 0 at the s...

I entered the "TaskValueSetAndRun" command with rule

On Clock # Time = All, 21: 28 do
  TaskValueSetAndRun, 1,2,0
Endon

  but the "Total" value of the pulser counter device does not change

Thanks for the reply.
I apologize if I ask a trivial question, but I am inexperienced ..
how can I then have the new value as a json output?

Hi! I take these old posts to be helped: sorry but I'm very inexperienced I would like to reset my pulse counter variable at 00:01 every day "Total" with the TaskValueSet rule "Sensors": [ { "TaskName": "counter", "Count": 0.00, "Total": 25...