I have the following problem: Analog values that are delivered via an ADS1115 sometimes behave paradoxically. E.g. the cistern (measured by an infrared sensor) rises when it rises, although it sinks. The same problem exists with the humidity sensor. After a period of time, the values will always adj...

Already done and checked. The module has enough Power (5V).

My ESP8266 has worked wonderfully to this day. But (possibly after a short circuit) it no longer boots. However, I can reactivate it by re-flashing it. After flashing, it runs perfectly as long as there is a USB serial connection to the PC. However, if I put it back on the normal power supply, it wi...

Does anyone have an idea how to use espeasy to implement a function that only puts the ESP into deepsleep mode at certain times? My plan is for the ESP to go into deepsleep mode at night and to be fully active during the day.

TD-er wrote: ↑21 Jan 2020, 23:44 Do you have multiple accesspoints with the same SSID in range?

Yes, I have a Unify-Network with 4 Access-Points. But I does not have this problems with other ESP-items.

Rob Muller wrote: ↑21 Jan 2020, 13:27 I had a similar issue
See here viewtopic.php?f=6&t=6610

hope that helps

Thank you. Already included it, but unfortunately this does not help

Yes, I have a Unify-Network with 4 Access-Points.

The following problem: My ESP8266 12E loses the WiFi access data after every power failure and becomes an access point. When I have entered this, "Warning: Connected via AP" appears. Who knows advice? ---- 0 Uptime: 0 days 0 hours 6 minutes Load: 6.40% (LC=2993) CPU Eco Mode: false Free Me...

Thank you! I will check it!

What is the configuration of the sensor plugin? -> Enclosed Does it have an interval set? Is that interval equal to the message interval? -> The interval is 10 sec., but the messages are changing much more often Do you have a long cable between switch and ESP? -> 2 meters Does the reed switch (I ass...

Here is a new url: https://go.twenga.de/to?s=5338647&gap=1o1&gat=pla&aagid=51642418498&acid=1016909450&atid=pla-402737810116&aadid=239794497323&mcoid=263784557148&appid=402737810116&gd=c&mcid=122839062&url=https%3A%2F%2Frover.ebay.com%2Frover%2F1%2F707-534...

Problem with capacitive soil moisture sensor (https://www.ebay.de/itm/Kapazitiver-Analog-Boden-Feuchtigkeitssensor-Capacitive-Soil-Moisture-Sensor-TFZ/): I calibrated this perfectly (once completely dry and once under water ). However, he always returns completely wrong numbers, sometimes in the min...

I have a magnetic switch on the door, which I have connected via GPIO as a "normal switch". 1st problem: When the switch is open, it constantly sends alternating 0 and 1 signals. When closed, however, it reliably transmits the signal 1 (reversed logic). I have already put in a resistor in ...

I have a problem with an ESP8266. He loses the wireless connection every now and then, although the reception is strong enough. He is then partially unavailable for several hours and can not be pinned. The LED indicates that it is fully connected. I've only been able to solve the problem by resettin...

I have a password problem while logging in via Espeasy. The nee given Password is not accepted, although I have definitely entered it correctly. The username has not been changed and is therefore excluded as a source of error. What would you do? The only explanation I have is that the password conta...

I have a problem with the ultrasonic sensor JSN-SR04T: It should measure the water level in a cistern. Basically, that works very well. The values are delivered cleanly to my server every 60 seconds. However, the value freezes again and again if it measures the same or a similar distance longer. He ...

Hello, I have the following problem: I want to send data via UDP to a Loxone server. But these do not arrive. Here are the rules: on Bodenfeuchte#Analog do SendTo 10.0.1.250,64001,nvalue=[Bodenfeuchte#Analog] endon These are the device settings: (see Screenshot) And that comes out of it: 752072: WD ...