Sonoff launches new POW equipment:
there are the GND Tx Rx Vc terminals which allow it to be flashed.
Which version of ESP Esay should we take to flash it? THANKS
Search found 9 matches
- 11 Feb 2023, 10:16
- Forum: ESP Easy: General Discussion
- Topic: New Sonoff Pow "Origin"
- Replies: 6
- Views: 1388
- 13 Sep 2019, 19:34
- Forum: ESP Easy: Software
- Topic: switch without gpio
- Replies: 3
- Views: 6834
Re: switch without gpio
Yes, that's it, I need a dummy device.budman1758 wrote: ↑12 Sep 2019, 18:36 I don't know of a way to change the state of a GPIO that does not exist.
Maybe try using a dummy device to change values with rules?
I have no more GPIO available (it's on sonoff4chpro, so the gpio are taken by relays and buttons)
- 11 Sep 2019, 07:45
- Forum: ESP Easy: Software
- Topic: switch without gpio
- Replies: 3
- Views: 6834
switch without gpio
Hello when I use a classic swith with a gpio, for example: Jus: Ampoule and GPIO: GPIO12 For ON: gpio,12,1 For Off: gpio,12,0 To use in rule: if [Jus#Ampoule] = 1 If I have no more GPIO available, and I want to use the switch name directly, I do not know how to change the state: Jus:Ampoule and GPIO...
- 03 Sep 2019, 13:21
- Forum: ESP Easy: Software
- Topic: Rule for watering cycles
- Replies: 7
- Views: 7779
Re: Rule for watering cycles
Merci à tous, thank you all
- 02 Sep 2019, 21:49
- Forum: ESP Easy: Software
- Topic: Rule for watering cycles
- Replies: 7
- Views: 7779
Re: Rule for watering cycles
Thank you for your advice, I went to see and sought to understand. Hello friends, here's what I did, it works. Do you think we can do more simple? Thank you for your valuable advice. on Clock#Time=All,22:00 do let,1,1 // compteur de boucles (de 3 zones) de 1 à %v2% let,2,5 // nombre de boucles (de 3...
- 31 Aug 2019, 10:03
- Forum: ESP Easy: Software
- Topic: Rule for watering cycles
- Replies: 7
- Views: 7779
Rule for watering cycles
Hello, I start with the rules and I need your help to understand. I would like with the instruction "On Clock # Time = All, 22:00 o'clock" to launch 5 launch loops of 3 watering zones (2 min each). I can do Zone 1 ON and zone 1 OFF on Clock # Time = All, 22:00 pm Launch cycle 1/5: * Launch...
- 29 Aug 2019, 21:46
- Forum: ESP Easy: Hardware
- Topic: GPIO 2 = 0 blocks the start of the SONOFF 4CH Pro R2.
- Replies: 1
- Views: 8072
GPIO 2 = 0 blocks the start of the SONOFF 4CH Pro R2.
Hello everyone, I noticed something strange, when I use GPIO2 = 1 when powering on the Sonoff 4CH pro, it hangs. Red LEDs 1 and 2 and 3 are lit in red and Sonoff does not start. If GPIO2 = 0 then everything happens normally and the Sonoff starts well. It does not happen when I reboot. Do you have an...
- 23 Jul 2019, 22:33
- Forum: ESP Easy: Software
- Topic: Interval function in the Devices tab
- Replies: 3
- Views: 5174
Re: Interval function in the Devices tab
The unit will poll the CURRENT VALUE once per interval. If you need to have a average or mean you would need to do that using rules. And change the interval to 1 second or something. OK, with this ? On Temp#Value Do Let,10,[VAR#9] Let,9,[VAR#8] Let,8,[VAR#7] Let,7,[VAR#6] Let,6,[VAR#5] Let,5,[VAR#4...
- 23 Jul 2019, 21:45
- Forum: ESP Easy: Software
- Topic: Interval function in the Devices tab
- Replies: 3
- Views: 5174
Interval function in the Devices tab
Hello everyone, I use a probe (temperature for example) that varies without stopping. Which means that if I put an "interval" at 5s, a new value changes every 5 seconds. My question is the following : If I put 60s, the interval function gives: * The value of the probe every 60s or * The av...