Search found 728 matches

by BertB
05 Sep 2019, 19:55
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

[...] Most important update would be the migration to the non-test status. Well as easy as that sounds (removing a word "testing" and moving a define + updating documentation), it may be more difficult than you would think. As you may have noticed, the last number of builds were quite a bit larger ...
by BertB
05 Sep 2019, 19:23
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

@BertB What do you think is needed to get it to "the next level" ? I can work very well with this plugin as it is. Maybe some more line would be nice to have. Sending data to a controller is not realy required. All event handling is taken care of in rules. Unless you want to fetch the data in a scr...
by BertB
04 Sep 2019, 23:35
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

I will think this over.
by BertB
04 Sep 2019, 08:26
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

Various people worked on this plugin, based on the work of majklovec. ThomasB was the last person to make major improvements. Unfortunately it is still in the Test state and it realy deserves to go into the next level. Although I made the first rough version of what it is right now, based on the wor...
by BertB
19 May 2019, 14:49
Forum: ESP Easy: General Discussion
Topic: Comments on the new UI?
Replies: 17
Views: 1537

Re: Comments on the new UI?

grovkillen wrote:
29 Apr 2019, 21:57
BertB wrote:
29 Apr 2019, 21:35
Interesting ... I only see an never stopping time wheel .
When does that happen?
With one of the WeMos boards. Right after clicking the Download UI button.
Another one did work, so I had a closes look.
by BertB
02 May 2019, 16:02
Forum: ESP Easy: General Discussion
Topic: What firmware release to use?
Replies: 14
Views: 1004

Re: What firmware release to use?

Also the DUST sensor PMX X003 works very good.
I did not create it, but I would like to have it added to the Normal devices repository too.
by BertB
02 May 2019, 07:05
Forum: ESP Easy: General Discussion
Topic: What firmware release to use?
Replies: 14
Views: 1004

Re: What firmware release to use?

I am fully suporting this initiative. The nextion plugin has proven to be very stable and usable. And to be transparent too, i also participated in its development.
by BertB
29 Apr 2019, 21:41
Forum: ESP Easy: General Discussion
Topic: What firmware release to use?
Replies: 14
Views: 1004

Re: What firmware release to use?

I used the test versions because of my dust sensor and Nextion display.
They do not exist in the normal firmware versions.
by BertB
29 Apr 2019, 21:35
Forum: ESP Easy: General Discussion
Topic: Comments on the new UI?
Replies: 17
Views: 1537

Re: Comments on the new UI?

Interesting ... I only see an never stopping time wheel .
by BertB
28 Apr 2019, 19:22
Forum: ESP Easy: General Discussion
Topic: What firmware release to use?
Replies: 14
Views: 1004

What firmware release to use?

Hi, I am getting a bit dizzy by all these firmware releases. I use to pick ESP_Easy_mega-2019----_test_core_242_ESP8266_4M.bin for my WeMos, but that seems to cause network instability, hence my step to ESP_Easy_mega-2019----_test_core_260_sdk2_alpha_ESP8266_4M.bin, which I am testing for some time ...
by BertB
28 Apr 2019, 19:14
Forum: ESP Easy: General Discussion
Topic: Comments on the new UI?
Replies: 17
Views: 1537

Re: Comments on the new UI?

I'd love to vote, but what new GUI are you talking about?
by BertB
06 Feb 2019, 15:48
Forum: ESP Easy: Software
Topic: Serial Server
Replies: 0
Views: 197

Serial Server

I have a WeMos with Serial Server connected to an Arduino 2650 with RFLink.
Most of the times that works fine, but every now and then the WeMos stops.
It is not possible then to see any logging.
Does someone have an idea to trap the problem?
by BertB
06 Feb 2019, 15:47
Forum: uPyEasy: Software
Topic: Serial Server
Replies: 2
Views: 360

Re: Serial Server

:oops:
by BertB
03 Feb 2019, 18:19
Forum: uPyEasy: Software
Topic: Serial Server
Replies: 2
Views: 360

Serial Server

I have a WeMos with Serial Server connected to a Arduino 2650 with RFLink.
Most of the times that works fine, but every now and then it hangs.
It is not possible then to see any logging.
Does someone have an idea to trap the problem?
by BertB
12 Jan 2019, 14:56
Forum: ESP Easy: Hardware
Topic: PMS7003 no readings
Replies: 7
Views: 844

Re: PMS7003 no readings

What do you mean with a long time? Somewhere in the documentation of the device, I read it takes about 30 secondes for the device to stabilise after a wake up. https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=2ahUKEwiZueuusejfAhXLa1AKHbktCWQQFjABegQICRAC&url=http%3A...
by BertB
02 Jan 2019, 16:25
Forum: ESP Easy: Projects / Applications
Topic: Rules for PMSx003 dust sensor
Replies: 22
Views: 1771

Re: Rules for PMSx003 dust sensor

grovkillen wrote:
02 Jan 2019, 14:49
Please bug report on GitHub.
seems it already exists:
Command LongPuls does not work correctly #1622
by BertB
02 Jan 2019, 13:57
Forum: ESP Easy: Projects / Applications
Topic: Rules for PMSx003 dust sensor
Replies: 22
Views: 1771

Re: Rules for PMSx003 dust sensor

What version are you using? Starting with ESP_Easy_mega-20180415_test_ESP8266_4096.bin, I had working releases up until ESP_Easy_mega-20180522_test_ESP8266_4096.bin ESP_Easy_mega-20180524_test_ESP8266_4096.bin gave an unknown command. The Current release, ESP_Easy_mega-20181231_test_ESP8266_4096.bi...
by BertB
02 Jan 2019, 12:11
Forum: ESP Easy: Projects / Applications
Topic: Rules for PMSx003 dust sensor
Replies: 22
Views: 1771

Re: Rules for PMSx003 dust sensor

grovkillen wrote:
02 Jan 2019, 06:04
What version are you using?
mega-20181231, but I think the problem is much older. I could try an older version.
by BertB
01 Jan 2019, 22:12
Forum: ESP Easy: Projects / Applications
Topic: Rules for PMSx003 dust sensor
Replies: 22
Views: 1771

Re: Rules for PMSx003 dust sensor

Male a test, set it to 1 and right after you set it to 0. After that you set the long pulse. I did as you suggested. http://xxx.xxx.xxx.xxx/control?cmd=GPIO,16,1 http://xxx.xxx.xxx.xxx/control?cmd=GPIO,16,0 http://xxx.xxx.xxx.xxx/control?cmd=LongPulse,16,1,1 In this case I saw, GPIO16 going up, dow...
by BertB
01 Jan 2019, 16:46
Forum: ESP Easy: Projects / Applications
Topic: Rules for PMSx003 dust sensor
Replies: 22
Views: 1771

Re: Rules for PMSx003 dust sensor

There must be somthing wrong with LongPulse then. Just for the purpose of faultfinding, I hooked up an oscilloscope to GPIO12 and put this conde in Rules. on System#Boot do gpio,12,0 timerSet,1,60 endon On Rules#Timer=1 do LongPulse,12,1,5 timerSet,1,60 endon At Boot I see the pin going to logic 0 f...
by BertB
31 Dec 2018, 16:43
Forum: ESP Easy: Projects / Applications
Topic: Rules for PMSx003 dust sensor
Replies: 22
Views: 1771

Re: Rules for PMSx003 dust sensor

I have a working connection between ESP and PMS 5003, but indeed, the fan keeps on forever. In the documentation, I read : GPIO 0-15 all have a built-in pull-up resistor, just like in an Arduino. GPIO16 has a built-in pull-down resistor. If this is true, it is possible that GPIO16 is not capable to ...
by BertB
30 Dec 2018, 16:28
Forum: ESP Easy: Hardware
Topic: PMS7003 no readings
Replies: 7
Views: 844

Re: PMS7003 no readings

When you put the Web log level to Debug en look in the web log window, don't you see messages like: 65666: PMSx003 : pm1.0=0, pm2.5=0, pm10=0, pm1.0a=0, pm2.5a=0, pm10a=32896 67466: PMSx003 : pm1.0=0, pm2.5=0, pm10=0, pm1.0a=0, pm2.5a=0, pm10a=32896 69274: PMSx003 : pm1.0=0, pm2.5=0, pm10=0, pm1.0a=...
by BertB
29 Dec 2018, 22:48
Forum: ESP Easy: Hardware
Topic: PMS7003 no readings
Replies: 7
Views: 844

Re: PMS7003 no readings

How did you configure the plugin and how did you wire the dust sensor?
by BertB
12 Oct 2018, 16:48
Forum: ESP Easy: General Discussion
Topic: ESP32
Replies: 27
Views: 4006

Re: ESP32

How can i upload the bin in win 10? https://drive.google.com/file/d/1xfKL-bGkQB0-hHgV_zZaXyKndEDD6Dsx/view?usp=sharing esptool.exe --chip esp32 --port COM3 --baud 256000 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x8000 partitions2...
by BertB
12 Oct 2018, 11:34
Forum: ESP Easy: General Discussion
Topic: ESP32
Replies: 27
Views: 4006

Re: ESP32

How can i upload the bin in win 10?
by BertB
02 Oct 2018, 23:18
Forum: ESP Easy: General Discussion
Topic: ESP32
Replies: 27
Views: 4006

Re: ESP32

Unfortunately, this behaviour is persistant.
I will try again tomorrow with another ESP32.
by BertB
02 Oct 2018, 17:36
Forum: ESP Easy: General Discussion
Topic: ESP32
Replies: 27
Views: 4006

Re: ESP32

Before I start another issue: I now have the ESP32 loaded with esp32test_1M8_partion from the Release mega-20181002 package. I used Platformio. Per haps I am messing up things, so: When the ESP32 is just doing its internal things, I get the following via serial: [E][vfs_api.cpp:27] open(): TmplStd.h...
by BertB
30 Sep 2018, 09:44
Forum: ESP Easy: General Discussion
Topic: ESP32
Replies: 27
Views: 4006

Re: ESP32

I have a Windows 10 pc. What is the best way to upload to the esp32? Platformio?
What flavour of profile should I use after pressing F7?
by BertB
29 Sep 2018, 12:59
Forum: ESP Easy: General Discussion
Topic: ESP32
Replies: 27
Views: 4006

ESP32

Probably silly questions, but where can I find details on the ESP32 support and what is the esp32test_1m8_partition? What does it do?
by BertB
16 Sep 2018, 17:37
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

Hi guys, I'm new here in this forum and from Germany. Sorry for my bad English. Can I explain one step by step how to set ESPeasy to recognize the display via I2C? Unfortunately, this does not work for me. Have the current Espeasy Mega flashed in the trial. Hi Quorle, Not sure what you mean with I2...
by BertB
08 Sep 2018, 16:24
Forum: ESP Easy: General Discussion
Topic: ESPEasy_mega_20180908 constant reboot
Replies: 6
Views: 1040

Re: ESPEasy_mega_20180908 constant reboot

I also tried the following.
1: load ESPEasy_mega-20180904
2: disable MQTT
3: load ESPEasy_mega-20180908
4: remove MQTT
5: re install MQTT

So far so good.

6: load ESPEasy_mega-20180908

And the error shows up again.
by BertB
08 Sep 2018, 15:31
Forum: ESP Easy: General Discussion
Topic: ESPEasy_mega_20180908 constant reboot
Replies: 6
Views: 1040

Re: ESPEasy_mega_20180908 constant reboot

What you see above is an update of a WeMos with MQTT and Nextion display only. First update was OTA, after that two attempts with serial USB connection. Same result over and over again. Because of your question, I compiled again and updated two NodeMcu boards. One with OLED and DHT22. No problem. Th...
by BertB
08 Sep 2018, 14:02
Forum: ESP Easy: General Discussion
Topic: ESPEasy_mega_20180908 constant reboot
Replies: 6
Views: 1040

ESPEasy_mega_20180908 constant reboot

@TD-er Constant reboots after update to ESPEasy_mega_20180908 This is the log in the serial interface of the Arduino IDE INIT : Booting version: (custom) (ESP82xx Core 2_4_2, NONOS SDK 2.2.1(cfd48f3), LWIP: 2.0.3) 88 : INIT : Warm boot #373 - Restart Reason: External System 92 : FS : Mounting... 117...
by BertB
05 Sep 2018, 13:41
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

Okay, thanks
by BertB
04 Sep 2018, 18:14
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

@BertB: Try this: Find the code shown below in Nextion.ino's PLUGIN_WRITE: section: String log = F("NEXTION075 : WRITE, "); log += F("Command is "); log += (tmpString.c_str()); addLog(LOG_LEVEL_INFO, log); success = true; // Set true only if plugin found a command to execute. Change it to: String l...
by BertB
19 Aug 2018, 22:29
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

You asked about a more natural way to find information page about the Nextion plugin. How do other plugins do this? If you go to https://www.letscontrolit.com/ , then click ESP Easy and Wiki, then in the left column click ESP Easy and on the next page on 4 Supported Sensors/Actuators. and Again on ...
by BertB
19 Aug 2018, 20:18
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

This is my page https://www.letscontrolit.com/wiki/inde ... IONDisplay

If you search for the Nextion here https://www.letscontrolit.com/wiki/index.php/Devices and click the Nextion display, you get your pages.
by BertB
19 Aug 2018, 16:37
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

@ThomasB

Is there a more natural way to find your information page about Nextion?

Would it not be nicer to get to it through the supported sensors part?
I am more than willing to move my How to (under construction) to another part of the wiki.

BertB
by BertB
15 Aug 2018, 16:04
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

ThomasB wrote:
15 Aug 2018, 01:16
Typo? The BC517 is listed as a NPN Darlington, whereas it needs to be a PNP small signal type. - Thomas
ooooooooops
I use a BC327
by BertB
14 Aug 2018, 23:15
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

I have taken your advice and switched up my TX/RX pins to 13 and 15 (D7/D8 on my NodeMCU) so I can use hardware serial. I disabled Serial Log File in Tools and now I can communicate just fine!! I didn't get the PNP Transistor yet, so I assume if I attempt to restart the NodeMCU ESPEasy will fail on...
by BertB
13 Aug 2018, 23:04
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

I managed to develop an easy way to update elements in the NEXTION, with HTTP messages send by domoticz.
It uses a small dzVents (LUA) script and the attributes of the devices in domoticz.

This can be handy if you want to sync with domoticz after a reset of Nextion.
by BertB
13 Aug 2018, 22:49
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

@BertB: Try this: Find the code shown below in Nextion.ino's PLUGIN_WRITE: section: String log = F("NEXTION075 : WRITE, "); log += F("Command is "); log += (tmpString.c_str()); addLog(LOG_LEVEL_INFO, log); success = true; // Set true only if plugin found a command to execute. Change it to: String l...
by BertB
13 Aug 2018, 21:08
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

@BertB: Unlike GPIO, Nextion does not reply to HTTP writes. So you won't see a status response to your Nextion commands sent by the browser. I suggest you retest with the browser and send commands that update some text fields (so you can verify HTTP writes to the display). If browser access is able...
by BertB
13 Aug 2018, 18:25
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

I use http://xxx.xxx.xxx.xxx/control?cmd=NEXTION,page0.vLight.val=1 kind of commands to control my ESP. For some reason it works out ok in the ESP, but I get an error in Domoticz. I vaguely remember it used to work fine in the past. EDIT When I do this: http://xxx.xxx.xxx.xxx/control?cmd=GPIO,13,0 i...
by BertB
09 Aug 2018, 21:09
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

+1
by BertB
31 Jul 2018, 21:00
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

Beautiful
by BertB
30 Jul 2018, 20:41
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

No problem. Maybe you can help me with that some time later. For now, I am sorting out with blockly.
by BertB
30 Jul 2018, 18:22
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

Thank you Thomas, but I already know that. Per haps you do not know, but back in 2016, I started to continue on the work of majklovec and took Nextion plugin to what it was before TD-er brought it to the development area. Until that moment I posted some editions here. Never mind. I am very happy wit...
by BertB
30 Jul 2018, 09:25
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 110679

Re: Nextion display plugin

Any idea how to create your item number 3?