Search found 36 matches

by Flying Domotic
18 Feb 2020, 10:15
Forum: ESP Easy: Software
Topic: Could not select "None" as GPIO in switch device
Replies: 4
Views: 1883

Re: Could not select "None" as GPIO in switch device

Did you tried deleting the device?
by Flying Domotic
06 Feb 2020, 10:25
Forum: ESP Easy: Hardware
Topic: Yet another doorsensor (WIP)
Replies: 2
Views: 2201

Re: Yet another doorsensor (WIP)

Any pointer on eBay?
by Flying Domotic
05 Feb 2020, 11:04
Forum: RFLink: French support forum
Topic: Alimentation XD-FST FS1000A pile 9V
Replies: 6
Views: 2587

Re: Alimentation XD-FST FS1000A pile 9V

Etrange ...

Ca fait pareil quand on met l'Arduino sous tension ?
by Flying Domotic
01 Feb 2020, 23:48
Forum: RFLink: French support forum
Topic: Alimentation XD-FST FS1000A pile 9V
Replies: 6
Views: 2587

Re: Alimentation XD-FST FS1000A pile 9V

Je pense qu'il faut connecter le moins de la pile au moins de l'Arduino (masses communes)
by Flying Domotic
26 Jan 2020, 10:16
Forum: ESP Easy: Hardware
Topic: New hackable ESP gadgets in local budget store "action" !!!
Replies: 105
Views: 52402

Re: New hackable ESP gadgets in local budget store "action" !!!

Should you get garbage at console, did you checked the serial port speed?
by Flying Domotic
10 Jan 2020, 21:10
Forum: ESP Easy: General Discussion
Topic: mise à l'heure avec ip fixe
Replies: 2
Views: 2370

Re: mise à l'heure avec ip fixe

Si ça cause plus, c'est qu'il ne doit pas y avoir de passerelle par défaut (il en faut une si on souhaite "causer" en dehors du sous réseau où on est connecté.
Et il faut aussi indiquer le(s) DNS, si on souhaite utiliser des noms au lieu d'@ IP.
by Flying Domotic
03 Jan 2020, 11:11
Forum: ESP Easy: Projects / Applications
Topic: Digital Wireless WiFi Smart Programmable Thermostat
Replies: 7
Views: 3270

Re: Digital Wireless WiFi Smart Programmable Thermostat

I mean: if you give us a pointer (or at least the brand) to the device you're trying to work with, someone can tell you if he/she already tested it.
As of now, we only know that you've found a Wifi Smart Thermostat on eBay, where there's lot of them ;-)
by Flying Domotic
25 Dec 2019, 11:44
Forum: uPyEasy: General Discussion
Topic: can't find router username and password
Replies: 1
Views: 1052

Re: can't find router username and password

Would it be possible to have brand and model of your router?
by Flying Domotic
23 Dec 2019, 11:13
Forum: RFLink: French support forum
Topic: Réception d'aucune trame avec le RFLink
Replies: 11
Views: 1666

Re: Réception d'aucune trame avec le RFLink

Content que ça fonctionne ! En ce qui concerne les alims, je pense que l'idée est de ne mettre les modules sous tension que lorsqu'on en a besoin. Il est aussi possible (je n'ai pas lu le code dans le détail) qu'on coupe la réception quand on émet (ce qui ne semble pas être ton cas), voire qu'on n'a...
by Flying Domotic
21 Dec 2019, 11:24
Forum: RFLink: French support forum
Topic: Réception d'aucune trame avec le RFLink
Replies: 11
Views: 1666

Re: Réception d'aucune trame avec le RFLink

Ben ça tombe bien, le RFLink est en 433,92 MHz ;-)

Et même si certains Somfy sont en 433,42 MHz, on arrive souvent à les lire en 433,92.

Du coup, ça ressemble fort à un souci côté récepteur ...

Est-il possible de vérifier que la PIN 16 est bien connectée au VCC et la PIN 19 au data du récepteur ?
by Flying Domotic
19 Dec 2019, 21:18
Forum: RFLink: French support forum
Topic: Réception d'aucune trame avec le RFLink
Replies: 11
Views: 1666

Re: Réception d'aucune trame avec le RFLink

Strange...
Est-il possible de tester avec une télécommande quelconque, pour voir si le RFLink reçoit bien ?
by Flying Domotic
18 Dec 2019, 00:22
Forum: RFLink: French support forum
Topic: Réception d'aucune trame avec le RFLink
Replies: 11
Views: 1666

Re: Réception d'aucune trame avec le RFLink

Bon, ça indique que ça cause ...
Qu'est ce que raconte un "10,status" ?
En particulier, est-ce que ça raconte bien

Code: Select all

20;03;STATUS;setRF433=ON; ?
Pour info, RFLink loader peut aider à debugger.
by Flying Domotic
17 Dec 2019, 12:01
Forum: RFLink: French support forum
Topic: Réception d'aucune trame avec le RFLink
Replies: 11
Views: 1666

Re: Réception d'aucune trame avec le RFLink

Bonjour,

Est-ce que le RFLink "cause" suite à un reboot ? L'idée est de vérifier que le lien avec le port COM (virtuel) fonctionne bien, à la bonne vitesse.
by Flying Domotic
17 Dec 2019, 11:47
Forum: ESP Easy: Software
Topic: Help needed with Rules (solved)
Replies: 8
Views: 2759

Re: Help needed with Rules

You may try :

Code: Select all

  if %systime% > %sunset% or %systime% < %sunrise%
    Gpio,13,1
   else
    Gpio,13,0
  endif
  
Concerning the door linked light, you could have a small side effect when closing the door during the day: this will turn light off
by Flying Domotic
17 Dec 2019, 10:44
Forum: ESP Easy: Hardware
Topic: Unable to solve RPC server.
Replies: 6
Views: 2923

Re: Unable to solve RPC server.

Delete all of them?
by Flying Domotic
06 Dec 2019, 10:05
Forum: ESP Easy: General Discussion
Topic: Newbeee - wants to use ESP Easy on a sailing boat
Replies: 3
Views: 2927

Re: Newbeee - wants to use ESP Easy on a sailing boat

Hi! You normally should see some new AP starting with ESPxxxx. Is this the case? You may also want to have minimum debug connecting to USB port with e terminal (either with Arduino IDE, Platform IO or any terminal like Putty). I'm pretty sure that knowing that's happen inside will help debug. Hope t...
by Flying Domotic
04 Dec 2019, 09:58
Forum: ESP Easy: Software
Topic: Can I get a value from an external web server
Replies: 9
Views: 3160

Re: Can I get a value from an external web server

Got it!

You so have to ask for a change (or do it yourself), and manage errors/timeouts if server don't answer for any reason.
by Flying Domotic
04 Dec 2019, 00:28
Forum: ESP Easy: Software
Topic: Can I get a value from an external web server
Replies: 9
Views: 3160

Re: Can I get a value from an external web server

May I suggest you doing it differently?
For example, sensor send the value to the server, and server sends back a command to the sensor (like relay on/off)?
We often do like this with automation systems ;-)
by Flying Domotic
01 Dec 2019, 18:20
Forum: RFLink: Unsupported devices
Topic: RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)
Replies: 5
Views: 4999

Re: RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)

I solved it by sending to Domoticz current state of the device (on or off), and adding a small piece of LUA code that send a toggle command only if required state is different of current state. It’s interesting but probably there no way to send back the current state of the device to the Domoticz u...
by Flying Domotic
24 Nov 2019, 10:43
Forum: ESP Easy: Projects / Applications
Topic: I²C to more I²C expander?
Replies: 17
Views: 5001

Re: I²C to more I²C expander?

You may also have a look at https://github.com/MajorLee95/nanoI2CIOExpander, using a nano as I2C IO expander
by Flying Domotic
23 Nov 2019, 08:11
Forum: ESP Easy: General Discussion
Topic: platformio.ini problem in mega-20191122
Replies: 40
Views: 5456

Re: platformio.ini problem in mega-20191122

Just to be sure, how are you starting build? Using <F7> key? What happens if you choose "normal ESP8266 4M1M" build in the F7 list?
by Flying Domotic
22 Nov 2019, 18:11
Forum: ESP Easy: General Discussion
Topic: platformio.ini problem in mega-20191122
Replies: 40
Views: 5456

Re: platformio.ini problem in mega-20191122

Try :

Code: Select all

env_default = normal_ESP8266_4M1M
by Flying Domotic
18 Nov 2019, 10:13
Forum: ESP Easy: Hardware
Topic: New hackable ESP gadgets in local budget store "action" !!!
Replies: 105
Views: 52402

Re: New hackable ESP gadgets in local budget store "action" !!!

Doing so, you've got an ESP powered only when contact changes, and can read contact value on GPIO 13 without need to board TUYA protocol, right?
Does EasyESP hav time to start and send the message within the powered interval?
by Flying Domotic
18 Nov 2019, 10:05
Forum: ESP Easy: Software
Topic: save max min values dummy device
Replies: 4
Views: 3119

Re: save max min values dummy device

You may perhaps get sometimes a zero value, that stays as minimum (unless you get lower values, like negative ones)?
by Flying Domotic
16 Nov 2019, 22:19
Forum: ESP Easy: Hardware
Topic: New hackable ESP gadgets in local budget store "action" !!!
Replies: 105
Views: 52402

Re: New hackable ESP gadgets in local budget store "action" !!!

Can you tell me more details, so we do not talk maybe about different things: * Firmware version of the doorsensor MCU ?, mine is 1.0.4 Don't know. I don't touch it. What's the way to get it? * Protocol used on the doorsensor to send the message, ESPNOW or MSGBUS or HTTP? ESPnow * Type of firmware ...
by Flying Domotic
14 Nov 2019, 18:04
Forum: ESP Easy: Hardware
Topic: New hackable ESP gadgets in local budget store "action" !!!
Replies: 105
Views: 52402

Re: New hackable ESP gadgets in local budget store "action" !!!

I think that the PIR sensor only triggers on motion detected. Not when no motion anymore. I replaced firmware but i can not remember that the original firmware sends motion on and motion off. Maybe cannot change this. Not even with other firmware in the ESP. I got that. In my case, no messages outs...
by Flying Domotic
13 Nov 2019, 11:05
Forum: RFLink: Unsupported devices
Topic: RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)
Replies: 5
Views: 4999

Re: RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)

I had the same problem with other hardware. I solved it by sending to Domoticz current state of the device (on or off), and adding a small piece of LUA code that send a toggle command only if required state is different of current state.
by Flying Domotic
13 Nov 2019, 11:02
Forum: ESP Easy: General Discussion
Topic: _P096_Vito Cant compile
Replies: 2
Views: 3628

Re: _P096_Vito Cant compile

You probably have to define TX to the pin number associated with your serial transmit somewhere in the header. Without checking (so I may be wrong), this could be due to the fact that RX, TX and probably other pins are defined by the PlatformIO environment, while they're not by Arduino IDE. It may b...
by Flying Domotic
08 Nov 2019, 10:08
Forum: ESP Easy: Hardware
Topic: New hackable ESP gadgets in local budget store "action" !!!
Replies: 105
Views: 52402

Re: New hackable ESP gadgets in local budget store "action" !!!

I also tried SmartNodeRules on LSC sensors. While this is working well with door sensor, it seems that the PIR sensors are not so good supported. Globally, settings and comms seems good (you got an "off" message send when powering the device on), but there's no update after this initial message. As ...
by Flying Domotic
08 Nov 2019, 10:03
Forum: ESP Easy: Hardware
Topic: New hackable ESP gadgets in local budget store "action" !!!
Replies: 105
Views: 52402

Re: New hackable ESP gadgets in local budget store "action" !!!

I also tried SmartNodeRules on LSC sensors. While this is working well with door sensor, it seems that the PIR sensors are not so good supported. Globally, settings and comms seems good (you got an "off" message send when powering the device on), but there's no update after this initial message. As ...
by Flying Domotic
06 Nov 2019, 10:19
Forum: ESP Easy: Software
Topic: ESP8266-01 Manufacturer: 5E Do Not Flash
Replies: 4
Views: 3369

Re: ESP8266-01 Manufacturer: 5E Do Not Flash

Did you tried "DOUT" flash mode?
by Flying Domotic
19 Oct 2019, 18:53
Forum: ESP Easy: Software
Topic: [SOLVED] Error building V2.0 with PlatformIO
Replies: 3
Views: 4709

Re: Error building V2.0 with PlatformIO

Effectively, with Mega branch, this is working better! Thx !
by Flying Domotic
11 Oct 2019, 10:57
Forum: ESP Easy: Software
Topic: [SOLVED] Error building V2.0 with PlatformIO
Replies: 3
Views: 4709

Re: Error building V2.0 with PlatformIO

I just did download V2.0 branch from GitHib, w/o any changes. I'll try Mega branch. Thx! May I suggest to clarify a bit Wiki on the release schema, and recommended branch(es)? Reading it, I concluded that stable version was 2.0, and Mega was a dev one ;-) It may perhaps be useful to give a direct po...
by Flying Domotic
08 Oct 2019, 23:11
Forum: ESP Easy: Software
Topic: [SOLVED] Error building V2.0 with PlatformIO
Replies: 3
Views: 4709

[SOLVED] Error building V2.0 with PlatformIO

Hello, First of all, I do apologies in advance if this question is a dummy one, but I'm a newby at ESPEasy, and even after trying to find a solution on Internet, I'm not able to fix the issue myself. I'm trying to compile ESPEasy V2.0 branch with PlatformIO (Atom version, not VSCode). Target is ESP8...
by Flying Domotic
05 Sep 2019, 09:36
Forum: ESP Easy: Software
Topic: electric pulse count to domoticz
Replies: 17
Views: 7927

Re: electric pulse count to domoticz

Not so sure to fully understand initial request, but I'll try to bring my 2 cents: As this is Domoticz, and it saves last time you wrote a value, I would suggest writting a small script that save last value, computes current value - last value/current time - last stored time to get the average consu...