Hi

Do you refer to #4020, created today?

Thanks much appreciated. That’s a step too far for me right now, although I’ll look at the code to at least have a look at your suggestion.

Not sure if this is the exact detail you’re looking for, using mega-20220328 Energy 4M for ESP32. Reverted back to ESP_Easy_mega_20211224_energy_ESP32_4M316k.bin to test, but with same result. Also not sure of settings, maybe the comms to UART should also be setup?

Hi there

I’m using the 22020328 Power version for the ESP32 4M on a Sonoff Dual R3. Your post seems to suggest that perhaps it doesn’t work as before, so perhaps I should go to an earlier release.

Goth the Dual R3 going with the advice from this post - Thank you. Now trying to figure out the CSE7766 (P077), after I installed the Power version of mega-20220328, over the air. Acitvated a CSE7766 device, quite easily. However no readings on V, I and P. Not sure what parameters should be loaded, ...

Hi there I found your post and code very interesting, and want to try it on a Sonoff Mini. I'm however not getting the Rule right, and my first problem starts with the MQTT. Can you perhaps please show me your config on the MQTT Import? I'm using NR, and can send any MQTT Topic, but it needs to be c...

Thanks for the very good information. To test my setup against your warnings, perhaps if you could comment. I will use a Wemos D1 Mini, with about 4-5m of 4core cable to the BME280. So in other words it is not in the same location of the processor. What concerns me though, is what housing I should u...

Yes the temperature is still fine. What is very interesting is that the humidity started coming down to about mid 50%. This morning the weather changed a bit, i.e. it is more overcast, and voila the humidity jumped back to 99.9% again! I move from a DHT11 getting lots of NaN's, to the slightly more ...

I have the same issue now, what is strange though Is that the sensor worked fine for quite a while. We however had a lot of rain, which the sensor measured pretty well, even have great graphs on Grafana. The sensor is mounted on my patio, hence no direct rain just outside temperatures and humidity. ...

I also want to re-look this post. My situation is exactly the same, rebooting randomly. My setup is a Mini Node MCU ESP8266 - 4M, with a D1 Power shield fed off a mobile phone charger, 7V, 700mA.I also have two DHT22's connected. I'll ry the settings for Connection failure threshold = 30, I had the ...