Hello,
TNX- i will test now.

U

Ath wrote: ↑24 Oct 2022, 22:04

skorc99 wrote: ↑24 Oct 2022, 21:57 ... but at boot relay is switched on- that is not ok.

I copied that from your original message...

How to avoid switching on?

I need to set 2 delays (after boot and after reset) ... HOW TO SET DELAY BEFORE PING SCRIPT ... HOW TO SET DELAY FOR 2 minutes that Ipcam IS ONLINE AGAIN A flag in var 1 is used to enable/disable the ping-check on System#Boot do gpio,13,1 // relay NC AsyncEvent,Rules#Timer=1 // just execute that ti...

I am using wemos d1 mini- gpio is OK. I tested this script and after boot relays are OK not switching. Timer is not working and not switching relay. debug is: 506110: EVENT: ipcam_ping#Ping=1.00 506162: Lev.1: [if 1=0]=false 506182: EVENT: ipcam_ping#Ping=1.00 Processing time:73 milliSeconds 506409:...

Hello, i would like to create rule with ping an reset in case of ping fail. (reset ip cam and router- 2 relays) Both are connected to relay NC-COM. This is my rule but at boot relay still goes on to NO. Second problem is that ipcam takes 2 minutes before it is up and running so i at the end i also n...

Hello,

is it possible to use MQ9 sensor to monitor CO value ?

I would also like to connect OLED to see value and send this value to domoticz.

U