Search found 6 matches

by shalwia
20 Apr 2020, 00:19
Forum: RFLink: Unsupported devices
Topic: RFLink - FAAC 868 MHz support
Replies: 0
Views: 6421

RFLink - FAAC 868 MHz support

I Hvar RFLink 868 MHz version. I’d like to control my FAAC gate system which’s also operating on the same frequency. Could anybody advise me how I can do that?
by shalwia
24 Jan 2020, 21:36
Forum: RFlink: General Discussions
Topic: RFLink Livolo IDs and Unit Codes
Replies: 2
Views: 9635

Re: RFLink Livolo IDs and Unit Codes

Read: http://www.rflink.nl/blog2/faq I’ve already ready it. The Livolo model is not mentioned there (there are Impuls, Kaku, EMW203R), so is there any possibility to control Livolo them using such a codes? The thing is that Some of the codes (randomly set on the basis of “ID’s” and “Unit codes” see...
by shalwia
10 Jan 2020, 21:21
Forum: RFlink: General Discussions
Topic: RFLink Livolo IDs and Unit Codes
Replies: 2
Views: 9635

RFLink Livolo IDs and Unit Codes

I would like to manually add the Livolo switches to the Domoticz. After selecting the "Livolo" item from available devices list there are three parameters I need to set using trzy select lists - two parameters are related to "ID" and one to "Unit code". Is there any key...
by shalwia
29 Nov 2019, 11:27
Forum: RFLink: Unsupported devices
Topic: RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)
Replies: 5
Views: 12545

Re: RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)

What you could try though is use a single remote ID and have all of the switches that you want learn first a toogle button (let’s say button 10), and then have them learn the On Only Scene button. This way you can turn them on with the On Only scene button, and turn them off with the remote’s ALL O...
by shalwia
29 Nov 2019, 10:47
Forum: RFLink: Unsupported devices
Topic: RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)
Replies: 5
Views: 12545

Re: RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)

I solved it by sending to Domoticz current state of the device (on or off), and adding a small piece of LUA code that send a toggle command only if required state is different of current state. It’s interesting but probably there no way to send back the current state of the device to the Domoticz u...
by shalwia
09 Nov 2019, 12:54
Forum: RFLink: Unsupported devices
Topic: RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)
Replies: 5
Views: 12545

RFLink <=> Livolo support (ON/OFF mode instead of Toogle mode)

I'm using Domoticz & RFLink set to control some of my home appliances (blinds etc.). Some time ago I bought a few Livolo wall switches supporting 433 Mhz communication (mainly due to the fact that it was stated on RFLink official website it's supporting Livolo). After installation of the wall sw...