I Hvar RFLink 868 MHz version. I’d like to control my FAAC gate system which’s also operating on the same frequency. Could anybody advise me how I can do that?

Read: http://www.rflink.nl/blog2/faq I’ve already ready it. The Livolo model is not mentioned there (there are Impuls, Kaku, EMW203R), so is there any possibility to control Livolo them using such a codes? The thing is that Some of the codes (randomly set on the basis of “ID’s” and “Unit codes” see...

I would like to manually add the Livolo switches to the Domoticz. After selecting the "Livolo" item from available devices list there are three parameters I need to set using trzy select lists - two parameters are related to "ID" and one to "Unit code". Is there any key...

What you could try though is use a single remote ID and have all of the switches that you want learn first a toogle button (let’s say button 10), and then have them learn the On Only Scene button. This way you can turn them on with the On Only scene button, and turn them off with the remote’s ALL O...

I solved it by sending to Domoticz current state of the device (on or off), and adding a small piece of LUA code that send a toggle command only if required state is different of current state. It’s interesting but probably there no way to send back the current state of the device to the Domoticz u...

I'm using Domoticz & RFLink set to control some of my home appliances (blinds etc.). Some time ago I bought a few Livolo wall switches supporting 433 Mhz communication (mainly due to the fact that it was stated on RFLink official website it's supporting Livolo). After installation of the wall sw...