Search found 88 matches

by chrille
01 Apr 2018, 22:55
Forum: ESP Easy: Software
Topic: ESP-32 plans for ESPEasy (?)
Replies: 58
Views: 52464

Re: ESP-32 plans for ESPEasy (?)

Did anyone succeed running on other ESP32 boards than the LoLin32 lite? I have two different ESP32 boards (the basic Lolin ESP32 and the Goouuu ESP32). I have no success with any of the two boards. I tried both the version from https://www.letscontrolit.com/wiki/index.php/ESPEasy32 and building the...
by chrille
01 Apr 2018, 20:11
Forum: ESP Easy: Software
Topic: ESP-32 plans for ESPEasy (?)
Replies: 58
Views: 52464

Re: ESP-32 plans for ESPEasy (?)

About the ESPeasy + ESP32 combo. I just tested an ESP32 module with the PlatformIO build I made yesterday and it just works :) So expect some more debugging on that platform too. (Already found the first bug...) Did anyone succeed running on other ESP32 boards than the LoLin32 lite? I have two diff...
by chrille
01 Oct 2017, 22:23
Forum: RFLink: Hardware Related discussions
Topic: 868Mhz receiver
Replies: 3
Views: 12075

Re: 868Mhz receiver

Could someone please point me to good source of 868MHz receivers working with RFLink? There are plenty of 433MHz modules on ebay but I've not found 868Mhz version. As mentioned in https://www.letscontrolit.com/forum/viewtopic.php?f=11&t=3308 the only 868 MHz supported module at the moment is th...
by chrille
30 Aug 2017, 13:21
Forum: RFlink: General Discussions
Topic: Fine Offset WH1080, WH1081 868MHz is not recognized?
Replies: 6
Views: 7206

Re: Fine Offset WH1080, WH1081 868MHz is not recognized?

I have a Fine Offset WH1080,WH1081(Proove WP1400) weatherstation with 868MHz sensor and that is not recognized by the RFlink gateway with a 868MHz transciever mounted. Other sensors are received. What module are you using for receiving 868 MHz? CC1101? I have a WH 1090 which I think is very similar...
by chrille
27 Nov 2016, 20:30
Forum: RFlink: General Discussions
Topic: RFlink console through RasPi
Replies: 2
Views: 5585

Re: RFlink console through RasPi

I wonder if the reason is the minicom sends character based, not entire lines, but I am not sure. Any helpfull suggestions on what to do in minicom, or what other SSH runnable terminal to use? Try <ctrl><j> in minicom - another alternative is using screen (the terminal multiplexer - it supports ser...
by chrille
11 Nov 2016, 12:32
Forum: RFLink: Unsupported devices
Topic: Support Request for SilverCrest 3711A / 113854 power switch
Replies: 11
Views: 18479

Re: Support Request for SilverCrest 3711A / 113854 power switch

I got myself some cheap remote controlled power switches from LIDL, marketed as SilverCrest 113854 (RCR DS1 3711-A). Unfortunately, they are not yet supported by RFLink - an amazing piece of hard- and software by the way. They come with a declaration of conformity by the German company Brennenstuhl...
by chrille
06 Oct 2016, 21:51
Forum: RFLink: Unsupported devices
Topic: Sartano 50028 - EV1527 variant
Replies: 2
Views: 5681

Re: Sartano 50028 - EV1527 variant

Voyager wrote:Model 50028 is not supported yet.
It uses scrambled communication and is not easy to implement.
We are working on a solution...hopefully soon..
Thank you - I'll watch out on the blog for any progress on this

- Jan
by chrille
03 Oct 2016, 21:00
Forum: RFLink: Unsupported devices
Topic: Sartano 50028 - EV1527 variant
Replies: 2
Views: 5681

Sartano 50028 - EV1527 variant

I recently bought a set of remotely controlled power switches like this: http://www.harald-nyborg.dk/p10047/stikkontakt-fjernbetjent-3-stk They are branded Sartano 50028. The remote has 4 channels (A, B, C and D) and seperate buttons for on/off for each of the 4 channels. Occasionally RFLink detects...
by chrille
17 Sep 2016, 20:34
Forum: RFlink: General Discussions
Topic: Rflink on esp8266?
Replies: 4
Views: 11367

Re: Rflink on esp8266?

but running everything on the ESP8266 would be nice I tried changing the PIN definitions in Base.ino to match ESP8266 pins, and except for missing support for strncasecmp() (which I included manually), it did compile for ESP8266. I did not test the code and even if it works it would still only outp...
by chrille
17 Sep 2016, 20:03
Forum: RFlink: General Discussions
Topic: Rflink on esp8266?
Replies: 4
Views: 11367

Re: Rflink on esp8266?

Is it posible to put rflink on a esp8266 and use wifi for the connection? Officially it's only supported on ATMega260 (Arduino Mega), but it seems it's possible to run it on ESP8266, since someone went through the effort to create PCB's for it: https://github.com/hallard/WeMos-RFLink Personally I'm...
by chrille
16 May 2016, 20:07
Forum: ESP Easy: Software
Topic: Is it possible to get IP address after boot (via serial monitor)?
Replies: 7
Views: 7810

Re: Is it possible to get IP address after boot (via serial monitor)?

I connected via serial Interface. I wrote "Settings" command in terminal but nothing happened. You need to make sure your terminal program sends both <CR> and <LF> ("DOS newline"). This has bitten me in the past, since minicom (which I use on Mac and Linux only sends unix style ...
by chrille
29 Apr 2016, 08:24
Forum: ESP Easy: Hardware
Topic: ML8511 UV sensor
Replies: 20
Views: 20591

Re: ML8511 UV sensor

Jan, I haven't really thought about this yet. I bought a couple of these units just for fun, along with several other sensors. So I even don't have a clue yet on how to interpret the output. Will see when I get there. OK, so I can simply hook it up to a NodeMCU. Then in EasyESP, select which sensor...
by chrille
28 Apr 2016, 20:01
Forum: ESP Easy: Hardware
Topic: ML8511 UV sensor
Replies: 20
Views: 20591

Re: ML8511 UV sensor

Unit ML8511 is a reasonably priced UV sensor. Can I hook this up to a NodeMCU? If not, any chance of getting this supported in EasyESP? The ML8511 provides an analog output, so you can connect it to any of the supported A/D converters. Depending on which you choose you might need a voltage divider ...
by chrille
04 Apr 2016, 15:25
Forum: RFLink: Hardware Related discussions
Topic: Receiver modules for 868 MHz
Replies: 2
Views: 4386

Re: Receiver modules for 868 MHz

FSK 868 mhz devices are not tested. The only things that have been tested are ASK 868mhz devices. Yes, but it's my assumption that the Fine Offset protocol is the same on 434 and 868 MHz, so if I can source a 868 MHz ASK module it should just work. Since you're writing FSK, do you have any knowledg...
by chrille
04 Apr 2016, 14:37
Forum: ESP Easy: Software
Topic: LastWill mqtt?
Replies: 24
Views: 20890

Re: LastWill mqtt?

Hi, is somethink like that possible? #define MQTT_TOPIC_LAST_WILL "/ESP_02/lwt" mqttClient.connect("ESP_02", MQTT_TOPIC_LAST_WILL, 1, true, "disconnected"); mqttClient.publish(MQTT_TOPIC_LAST_WILL, "connected", true); I support this! LWT support for MQTT woul...
by chrille
04 Apr 2016, 14:35
Forum: RFLink: Hardware Related discussions
Topic: Receiver modules for 868 MHz
Replies: 2
Views: 4386

Receiver modules for 868 MHz

I have a Fine Offset based weather station running on 868 MHz and was wondering if RFlink have been tested with any 868 MHz modules. The selection of 868 MHz ASK receivers on Aliexpress is somewhat limited

- Jan
by chrille
29 Mar 2016, 20:13
Forum: ESP Easy: Hardware
Topic: Tiny I2C Watchdog
Replies: 6
Views: 7350

Re: Tiny I2C Watchdog

Not possible to compile with arduino IDE 1.6.5 and 1.6.8 many errors and: "collect2.exe: error: ld returned 5 exit status Error compiling." Maybe problem with Arduino TINY library.... I changed #include "TinyWireS_Custom.h" to #include "TinyWireS_Custom/TinyWireS_Custom.h&q...
by chrille
29 Mar 2016, 19:16
Forum: ESP Easy: Hardware
Topic: Tiny I2C Watchdog
Replies: 6
Views: 7350

Re: Tiny I2C Watchdog

Hi, This I have done but still not possible to compile sketch without " TinyWireS_Custom.h " guys, please upload that file... Try to pull the latest version from github - the missing files seems to have been added now https://github.com/ESP8266nu/ESPEasy/blob/f05e6b8a6dde3c1a5c9e737744202...
by chrille
29 Mar 2016, 15:04
Forum: ESP Easy: Hardware
Topic: Tiny I2C Watchdog
Replies: 6
Views: 7350

Re: Tiny I2C Watchdog

please help! ;) also please upload TinyWireS_Custom.h :shock: The Arduino IDE doesn't come with support for ATTiny by default - you need to add an additionel board manager (like with ESP8266) Please see: http://highlowtech.org/?p=1695 (disclaimer: My Attiny IC's are still on their way from China, s...
by chrille
28 Mar 2016, 16:37
Forum: ESP Easy: Software
Topic: sysinfo/rssi not shown on LCD
Replies: 7
Views: 6659

Re: sysinfo/rssi not shown on LCD

voyager46 wrote:same issue on my OLED using R91. Only showing:
RSSI:dBm
RSSI:dBm.
Thank you for confirming that I'm not the only one seeing this issue :)

- Jan
by chrille
27 Mar 2016, 10:40
Forum: ESP Easy: Software
Topic: sysinfo/rssi not shown on LCD
Replies: 7
Views: 6659

sysinfo/rssi not shown on LCD

I have created a sysinfo device (name: sysinfo, value name 1: rssi) for Wifi RSSI To display it on a 20x4 LCD I use "U: %uptime% min R: [sysinfo#rssi] dBm" This worked in R80 but seems to be broken in R91 The values gets published to my MQTT broker just fine The display shows "U: 3 mi...
by chrille
11 Mar 2016, 08:38
Forum: ESP Easy: General Discussion
Topic: Ultrasonic sensor question
Replies: 4
Views: 5584

Re: Ultrasonic sensor question

For the HC-SR04 ultrasonic sensor - would it be possible to make an option in the code, that the ESP would send a MQTT message 1 if object besides the sensor was present (for example car in a garage) and 0 if the object wasn't present. So basically send MQTT message 1 (or something else) if object ...
by chrille
01 Mar 2016, 14:33
Forum: ESP Easy: Software
Topic: Esp easy on Domoticz with public IP [Solved]
Replies: 9
Views: 9634

Re: Esp easy on Domoticz with public IP

Test 2: If in the settings of domoticz server enter the IP address of the remote location then ESP-Easy working completely normally on port 8080 without NAT and port redirects in the router at a remote location ... So the conclusion is that everything is working from remote locations but due to dyn...
by chrille
29 Feb 2016, 16:10
Forum: ESP Easy: Software
Topic: Esp easy on Domoticz with public IP [Solved]
Replies: 9
Views: 9634

Re: Esp easy on Domoticz with public IP

Thank you for taking the time that you have to answer my question, but until I progressed in my knowledge of internet communications to simplify the question .... Do in each location where I have esp easy I must to have a Domoticz server configured as a slave or ESP-easy can work independently like...
by chrille
29 Feb 2016, 08:19
Forum: ESP Easy: Software
Topic: Esp easy on Domoticz with public IP [Solved]
Replies: 9
Views: 9634

Re: Esp easy on Domoticz with public IP

Hello,esp easy is awesome and all congratulations on the project. As a beginner I have one question .... While everything was working in local network, everything was fine .... Because I want to have more esp easy module at various locations I put Domoticz on a static/public ip address but from the...
by chrille
28 Feb 2016, 15:52
Forum: ESP Easy: General Discussion
Topic: Board Manager 2.1 released: somedoby tried it ?
Replies: 2
Views: 4684

Re: Board Manager 2.1 released: somedoby tried it ?

I saw that rel 2.1 of Board Manager has been released. Has somebody tried it out ? I just started a "compile" in the IDE, but got something like an "illegal variable type in serial config something" that stopped any further step.... :roll: For now, you can change line 116 in ser...
by chrille
21 Feb 2016, 12:29
Forum: ESP Easy: Projects / Applications
Topic: Install ESPEasy with a Mac, esptool.py
Replies: 2
Views: 11431

Re: Install ESPEasy with a Mac, esptool.py

I'am trying to install ESPEasy on a ESP8266-01, it's black. I want to use ESPEasy with Domoticz. Flashing a nodeMCU with esptool.py works well. I did try to flash the 1024 k and 512 k binary images both from R78. Both images flash well with or without the parameter set: -fs 32m -fm dio -ff 40m at t...
by chrille
06 Feb 2016, 16:39
Forum: ESP Easy: Software
Topic: no matching function for call to 'PubSubClient::PubSubClient(const char [1])'
Replies: 4
Views: 11870

Re: no matching function for call to 'PubSubClient::PubSubClient(const char [1])'

I followed this tutorial: http://www.esp8266.nu/index.php/Tutorial_Arduino_Firmware_Upload I pasted the libraries in the right folders and I updated all of them. after following all the steps is gain this error: 'emergencyReset' was not declared in this scope I simply "fixed" this error b...
by chrille
24 Jan 2016, 12:21
Forum: ESP Easy: Hardware
Topic: build 70: HC-SR04 random values
Replies: 4
Views: 5485

Re: build 70: HC-SR04 random values

Hi, had the same problem using these part. It´s right, the trigger could be connect direct. I used also resistor network (4K7 and 10K) and that´s bullshit because we init a war between the Pull´s: an Down in your RNetwork an Up activted via Software (see the script to the HC04) I have been using a ...
by chrille
23 Jan 2016, 20:01
Forum: ESP Easy: Hardware
Topic: build 70: HC-SR04 random values
Replies: 4
Views: 5485

Re: build 70: HC-SR04 random values

Hi, I connected a HC-SR04 via a level shifter (like this ). I have connected it via gpio4,5. Other devices I have is a DS18B20 and a light sensor, they both deliver good values. But the distance sensor show me values like 0.17 (when its meters, its ok from my desk to the ceiling) and often values l...
by chrille
21 Jan 2016, 20:44
Forum: ESP Easy: General Discussion
Topic: ESPEasy from github can't build...
Replies: 1
Views: 3927

Re: ESPEasy from github can't build...

gorec2005 wrote:Help please!
i can't build ESPEasy from github - tryed latest arduino ide (today nigthly-build)

[...]

What can i do?
You need to use Arduino IDE 1.6.5 for now to build ESPEasy.

- Jan
by chrille
21 Jan 2016, 13:59
Forum: ESP Easy: Hardware
Topic: DHT22 Problem
Replies: 25
Views: 31971

Re: DHT22 Problem

I also get false readings from AM2302(similar to DHT22), 5k1 resistor to data pin, 3.7v power(single liion cell). Using this in deep sleep mode, i think the priblem is in a sensor work after *awake* from sleep. temperature readings are 4 degrees error - humidity 50% error. Many people on the web re...
by chrille
20 Jan 2016, 21:12
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283559

Re: ESP Easy Releases

Martinus wrote:- Adds OTA update using bin file upload through the ESP Easy webgui (NOT from arduino IDE):
Just tested with upgrade from R68 to R69 - worked flawlessly!

- Jan
by chrille
18 Jan 2016, 08:25
Forum: ESP Easy: General Discussion
Topic: Witch pin not to use
Replies: 5
Views: 7570

Re: Witch pin not to use

What are the pins i can not use... Then i see this... ScreenShot024.jpg Can i change this? What is the maximum pins i can use... What are the best pins for the Short pulses option: GPIO 0, 2 and 15 have special purposes during boot, and you must make sure that GPIO 0 and 2 is not pulled low during ...
by chrille
17 Jan 2016, 19:41
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283559

Re: ESP Easy Releases

I am also very happy about software OTA upload. One question though - normally, Arduino IDE sketches contain initial configuration of device name, etc. What should be put there in order for the device to keep configuration after upload? The settings you define in espeasy.ino are the default values ...
by chrille
17 Jan 2016, 19:40
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283559

Re: ESP Easy Releases

You are right. I'm currently running a total of 15 modules (production and test lab), being a mixture of ESP-01 and NodeMCU V1 modules. I have updated and tested them all using OTA and it's much faster and easier than serial update. :D :D :D I have been using OTA on several ESP8266 modules for some...
by chrille
17 Jan 2016, 18:46
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283559

Re: ESP Easy Releases

Martinus wrote:R68 is available on github:

- Fixes the CSS upload feature
- Adds OTA update using bin file upload through the ESP Easy webgui (NOT from arduino IDE):
This is a great addition - OTA makes it so much easier to update modules - especially those installed around the house!

- Jan
by chrille
16 Jan 2016, 13:13
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283559

Re: ESP Easy Releases

Martinus wrote:Your valuename field seems empty in task settings. Its printed after the "/" but blank...
My fault... sorry - it works perfectly fine now

Code: Select all

/ESP008364/sysinfo/memory 30120.00
/ESP008364/sysinfo/uptime 197.00
- Jan
by chrille
16 Jan 2016, 10:45
Forum: ESP Easy: Projects / Applications
Topic: One ESP Max sensors
Replies: 1
Views: 3161

Re: One ESP Max sensors

But to get my pellet stove on and off should I give a command of 2-3 seconds Is there a possibility that the esp2866 little longer give a command. I should probably make a contact of 2-3 seconds to turn the stove on or off.. For example.. 3 seconds contact stove on, 3 seconds contact stove off. If ...
by chrille
16 Jan 2016, 10:37
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283559

Re: ESP Easy Releases

R65 is available on github: Added a simple plugin device to send single values to the controller. I have tested this with the OpenHAB MQTT protocol and there's a cosmetical issue /ESP008364/dsw3/Temperature 21.25 /ESP008364/adc3/Analog 120.00 /ESP008364/memory/ 29936.00 Notice the trailing / after ...
by chrille
16 Jan 2016, 10:34
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283559

Re: ESP Easy Releases

R64 is available for download on github, beware that it's development stuff... Added %uptime% as variable for display To be used for LCD/OLED display This works - thanks! Added padding to LCD/OLED display Fixes a 'bug' This does not work for me (tested in R65 and with LCD2004) See this photo http:/...
by chrille
15 Jan 2016, 14:14
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283559

Re: ESP Easy Releases

Please, did you consider adding "dummy" sensor for monitoring uptime and additional system parameters? Idea is to have such sensor for troubleshooting, tracking restarts etc. which make sense once we are able to pull sensor values with json now. This has been requested by several other fo...
by chrille
13 Jan 2016, 12:02
Forum: ESP Easy: Software
Topic: LCD - clear before write
Replies: 7
Views: 7027

Re: LCD - clear before write

Martinus wrote:Next build will use padding to solve this (both LCD and OLED)
Next build will have %uptime% as system variable.
Hi Martinus,
Thank you very much for fixing/adding this

- Jan
by chrille
13 Jan 2016, 11:17
Forum: ESP Easy: Software
Topic: LCD - clear before write
Replies: 7
Views: 7027

Re: LCD - clear before write

Maybe using thie Event Action plugin we have discussed before, say one time during the day/night? This way, we would be able to say, if the module is stable or not? This should probably be moved to a new thread, but it would surely be great to have virtual "sensors" to report stuff like -...
by chrille
11 Jan 2016, 07:52
Forum: ESP Easy: Software
Topic: LCD - clear before write
Replies: 7
Views: 7027

LCD - clear before write

I have a module with R63 and a LCD2004. When I write something on the display, existing text is not cleared For instance, upon startup the first line says "ESPeasy" - if I write "test" on line 1, the display will read "testasy", and if I have a temperature reading sayin...
by chrille
06 Jan 2016, 14:39
Forum: ESP Easy: General Discussion
Topic: Newbie Arduino Uno to ESP8266 - 12
Replies: 5
Views: 5843

Re: Newbie Arduino Uno to ESP8266 - 12

Question: Can I just use a voltage divider (Resistors) from the output of the Arduino to get it down to 3.3v? If yes would it be just a simple matter of connecting a wire from the output of the voltage divider into the esp8266 (Ground of Arduino & ESP conncted) Then I would configure espeasy to...
by chrille
26 Dec 2015, 09:18
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283559

Re: ESP Easy Releases

After running R43 for a while I upgraded to R57 last night (mainly to verify that the MQTT authentication did work - it did, thanks!) but also enabled NTP. It's an ESP12, with 10x DS18B20, 1x PCF8591, 1x HC-SR04 and 1x DHT-22. It has now been up for 553 minutes and seems stable

- Jan
by chrille
22 Dec 2015, 22:47
Forum: ESP Easy: Software
Topic: MySensors goes ESP!!
Replies: 91
Views: 101921

Re: MySensors goes ESP!!

No further plans in my roadmap yet. I would first like to see if this route has enough potential or need. So far, not many reactions, neither on Domoticz nor MySensors forum and my question on Domoticz forum about multiple sensors on a single node remain unanswered. Of course we're still a very sma...
by chrille
22 Dec 2015, 22:43
Forum: ESP Easy: Projects / Applications
Topic: ESP-01 temp + hum on GPIO 0 - startup issue
Replies: 2
Views: 4482

Re: ESP-01 temp + hum on GPIO 0 - startup issue

I have created a module for driving a single relay, converting it from my previous DHT11 temperature module only. In order to avoid (or so I thought) an issue with GPIO 0 leading to programming mode, I have moved DHT11 to GPIO 0 and relay attached to GPIO 2. My limited experience with relays on GPI...
by chrille
15 Dec 2015, 20:32
Forum: ESP Easy: Projects / Applications
Topic: Garage door control - emulate push button - how?
Replies: 9
Views: 14052

Re: Garage door control - emulate push button - how?

mkotek wrote:What should be done to effectively invoke the same action as ordinary push button does to control my garage door?
A relay?

http://www.esp8266.nu/index.php/Relais

- Jan