Search found 88 matches
- 01 Apr 2018, 22:55
- Forum: ESP Easy: Software
- Topic: ESP-32 plans for ESPEasy (?)
- Replies: 58
- Views: 53978
Re: ESP-32 plans for ESPEasy (?)
Did anyone succeed running on other ESP32 boards than the LoLin32 lite? I have two different ESP32 boards (the basic Lolin ESP32 and the Goouuu ESP32). I have no success with any of the two boards. I tried both the version from https://www.letscontrolit.com/wiki/index.php/ESPEasy32 and building the...
- 01 Apr 2018, 20:11
- Forum: ESP Easy: Software
- Topic: ESP-32 plans for ESPEasy (?)
- Replies: 58
- Views: 53978
Re: ESP-32 plans for ESPEasy (?)
About the ESPeasy + ESP32 combo. I just tested an ESP32 module with the PlatformIO build I made yesterday and it just works :) So expect some more debugging on that platform too. (Already found the first bug...) Did anyone succeed running on other ESP32 boards than the LoLin32 lite? I have two diff...
- 01 Oct 2017, 22:23
- Forum: RFLink: Hardware Related discussions
- Topic: 868Mhz receiver
- Replies: 3
- Views: 12166
Re: 868Mhz receiver
Could someone please point me to good source of 868MHz receivers working with RFLink? There are plenty of 433MHz modules on ebay but I've not found 868Mhz version. As mentioned in https://www.letscontrolit.com/forum/viewtopic.php?f=11&t=3308 the only 868 MHz supported module at the moment is th...
- 30 Aug 2017, 13:21
- Forum: RFlink: General Discussions
- Topic: Fine Offset WH1080, WH1081 868MHz is not recognized?
- Replies: 6
- Views: 7265
Re: Fine Offset WH1080, WH1081 868MHz is not recognized?
I have a Fine Offset WH1080,WH1081(Proove WP1400) weatherstation with 868MHz sensor and that is not recognized by the RFlink gateway with a 868MHz transciever mounted. Other sensors are received. What module are you using for receiving 868 MHz? CC1101? I have a WH 1090 which I think is very similar...
- 27 Nov 2016, 20:30
- Forum: RFlink: General Discussions
- Topic: RFlink console through RasPi
- Replies: 2
- Views: 5614
Re: RFlink console through RasPi
I wonder if the reason is the minicom sends character based, not entire lines, but I am not sure. Any helpfull suggestions on what to do in minicom, or what other SSH runnable terminal to use? Try <ctrl><j> in minicom - another alternative is using screen (the terminal multiplexer - it supports ser...
- 11 Nov 2016, 12:32
- Forum: RFLink: Unsupported devices
- Topic: Support Request for SilverCrest 3711A / 113854 power switch
- Replies: 11
- Views: 18741
Re: Support Request for SilverCrest 3711A / 113854 power switch
I got myself some cheap remote controlled power switches from LIDL, marketed as SilverCrest 113854 (RCR DS1 3711-A). Unfortunately, they are not yet supported by RFLink - an amazing piece of hard- and software by the way. They come with a declaration of conformity by the German company Brennenstuhl...
- 06 Oct 2016, 21:51
- Forum: RFLink: Unsupported devices
- Topic: Sartano 50028 - EV1527 variant
- Replies: 2
- Views: 5728
Re: Sartano 50028 - EV1527 variant
Thank you - I'll watch out on the blog for any progress on thisVoyager wrote:Model 50028 is not supported yet.
It uses scrambled communication and is not easy to implement.
We are working on a solution...hopefully soon..
- Jan
- 03 Oct 2016, 21:00
- Forum: RFLink: Unsupported devices
- Topic: Sartano 50028 - EV1527 variant
- Replies: 2
- Views: 5728
Sartano 50028 - EV1527 variant
I recently bought a set of remotely controlled power switches like this: http://www.harald-nyborg.dk/p10047/stikkontakt-fjernbetjent-3-stk They are branded Sartano 50028. The remote has 4 channels (A, B, C and D) and seperate buttons for on/off for each of the 4 channels. Occasionally RFLink detects...
- 17 Sep 2016, 20:34
- Forum: RFlink: General Discussions
- Topic: Rflink on esp8266?
- Replies: 4
- Views: 11406
Re: Rflink on esp8266?
but running everything on the ESP8266 would be nice I tried changing the PIN definitions in Base.ino to match ESP8266 pins, and except for missing support for strncasecmp() (which I included manually), it did compile for ESP8266. I did not test the code and even if it works it would still only outp...
- 17 Sep 2016, 20:03
- Forum: RFlink: General Discussions
- Topic: Rflink on esp8266?
- Replies: 4
- Views: 11406
Re: Rflink on esp8266?
Is it posible to put rflink on a esp8266 and use wifi for the connection? Officially it's only supported on ATMega260 (Arduino Mega), but it seems it's possible to run it on ESP8266, since someone went through the effort to create PCB's for it: https://github.com/hallard/WeMos-RFLink Personally I'm...
- 16 May 2016, 20:07
- Forum: ESP Easy: Software
- Topic: Is it possible to get IP address after boot (via serial monitor)?
- Replies: 7
- Views: 7907
Re: Is it possible to get IP address after boot (via serial monitor)?
I connected via serial Interface. I wrote "Settings" command in terminal but nothing happened. You need to make sure your terminal program sends both <CR> and <LF> ("DOS newline"). This has bitten me in the past, since minicom (which I use on Mac and Linux only sends unix style ...
- 29 Apr 2016, 08:24
- Forum: ESP Easy: Hardware
- Topic: ML8511 UV sensor
- Replies: 20
- Views: 20679
Re: ML8511 UV sensor
Jan, I haven't really thought about this yet. I bought a couple of these units just for fun, along with several other sensors. So I even don't have a clue yet on how to interpret the output. Will see when I get there. OK, so I can simply hook it up to a NodeMCU. Then in EasyESP, select which sensor...
- 28 Apr 2016, 20:01
- Forum: ESP Easy: Hardware
- Topic: ML8511 UV sensor
- Replies: 20
- Views: 20679
Re: ML8511 UV sensor
Unit ML8511 is a reasonably priced UV sensor. Can I hook this up to a NodeMCU? If not, any chance of getting this supported in EasyESP? The ML8511 provides an analog output, so you can connect it to any of the supported A/D converters. Depending on which you choose you might need a voltage divider ...
- 04 Apr 2016, 15:25
- Forum: RFLink: Hardware Related discussions
- Topic: Receiver modules for 868 MHz
- Replies: 2
- Views: 4413
Re: Receiver modules for 868 MHz
FSK 868 mhz devices are not tested. The only things that have been tested are ASK 868mhz devices. Yes, but it's my assumption that the Fine Offset protocol is the same on 434 and 868 MHz, so if I can source a 868 MHz ASK module it should just work. Since you're writing FSK, do you have any knowledg...
- 04 Apr 2016, 14:37
- Forum: ESP Easy: Software
- Topic: LastWill mqtt?
- Replies: 24
- Views: 20971
Re: LastWill mqtt?
Hi, is somethink like that possible? #define MQTT_TOPIC_LAST_WILL "/ESP_02/lwt" mqttClient.connect("ESP_02", MQTT_TOPIC_LAST_WILL, 1, true, "disconnected"); mqttClient.publish(MQTT_TOPIC_LAST_WILL, "connected", true); I support this! LWT support for MQTT woul...
- 04 Apr 2016, 14:35
- Forum: RFLink: Hardware Related discussions
- Topic: Receiver modules for 868 MHz
- Replies: 2
- Views: 4413
Receiver modules for 868 MHz
I have a Fine Offset based weather station running on 868 MHz and was wondering if RFlink have been tested with any 868 MHz modules. The selection of 868 MHz ASK receivers on Aliexpress is somewhat limited
- Jan
- Jan
- 29 Mar 2016, 20:13
- Forum: ESP Easy: Hardware
- Topic: Tiny I2C Watchdog
- Replies: 6
- Views: 7375
Re: Tiny I2C Watchdog
Not possible to compile with arduino IDE 1.6.5 and 1.6.8 many errors and: "collect2.exe: error: ld returned 5 exit status Error compiling." Maybe problem with Arduino TINY library.... I changed #include "TinyWireS_Custom.h" to #include "TinyWireS_Custom/TinyWireS_Custom.h&q...
- 29 Mar 2016, 19:16
- Forum: ESP Easy: Hardware
- Topic: Tiny I2C Watchdog
- Replies: 6
- Views: 7375
Re: Tiny I2C Watchdog
Hi, This I have done but still not possible to compile sketch without " TinyWireS_Custom.h " guys, please upload that file... Try to pull the latest version from github - the missing files seems to have been added now https://github.com/ESP8266nu/ESPEasy/blob/f05e6b8a6dde3c1a5c9e737744202...
- 29 Mar 2016, 15:04
- Forum: ESP Easy: Hardware
- Topic: Tiny I2C Watchdog
- Replies: 6
- Views: 7375
Re: Tiny I2C Watchdog
please help! ;) also please upload TinyWireS_Custom.h :shock: The Arduino IDE doesn't come with support for ATTiny by default - you need to add an additionel board manager (like with ESP8266) Please see: http://highlowtech.org/?p=1695 (disclaimer: My Attiny IC's are still on their way from China, s...
- 28 Mar 2016, 16:37
- Forum: ESP Easy: Software
- Topic: sysinfo/rssi not shown on LCD
- Replies: 7
- Views: 6678
Re: sysinfo/rssi not shown on LCD
Thank you for confirming that I'm not the only one seeing this issuevoyager46 wrote:same issue on my OLED using R91. Only showing:
RSSI:dBm
RSSI:dBm.
- Jan
- 27 Mar 2016, 10:40
- Forum: ESP Easy: Software
- Topic: sysinfo/rssi not shown on LCD
- Replies: 7
- Views: 6678
sysinfo/rssi not shown on LCD
I have created a sysinfo device (name: sysinfo, value name 1: rssi) for Wifi RSSI To display it on a 20x4 LCD I use "U: %uptime% min R: [sysinfo#rssi] dBm" This worked in R80 but seems to be broken in R91 The values gets published to my MQTT broker just fine The display shows "U: 3 mi...
- 11 Mar 2016, 08:38
- Forum: ESP Easy: General Discussion
- Topic: Ultrasonic sensor question
- Replies: 4
- Views: 5620
Re: Ultrasonic sensor question
For the HC-SR04 ultrasonic sensor - would it be possible to make an option in the code, that the ESP would send a MQTT message 1 if object besides the sensor was present (for example car in a garage) and 0 if the object wasn't present. So basically send MQTT message 1 (or something else) if object ...
- 01 Mar 2016, 14:33
- Forum: ESP Easy: Software
- Topic: Esp easy on Domoticz with public IP [Solved]
- Replies: 9
- Views: 9694
Re: Esp easy on Domoticz with public IP
Test 2: If in the settings of domoticz server enter the IP address of the remote location then ESP-Easy working completely normally on port 8080 without NAT and port redirects in the router at a remote location ... So the conclusion is that everything is working from remote locations but due to dyn...
- 29 Feb 2016, 16:10
- Forum: ESP Easy: Software
- Topic: Esp easy on Domoticz with public IP [Solved]
- Replies: 9
- Views: 9694
Re: Esp easy on Domoticz with public IP
Thank you for taking the time that you have to answer my question, but until I progressed in my knowledge of internet communications to simplify the question .... Do in each location where I have esp easy I must to have a Domoticz server configured as a slave or ESP-easy can work independently like...
- 29 Feb 2016, 08:19
- Forum: ESP Easy: Software
- Topic: Esp easy on Domoticz with public IP [Solved]
- Replies: 9
- Views: 9694
Re: Esp easy on Domoticz with public IP
Hello,esp easy is awesome and all congratulations on the project. As a beginner I have one question .... While everything was working in local network, everything was fine .... Because I want to have more esp easy module at various locations I put Domoticz on a static/public ip address but from the...
- 28 Feb 2016, 15:52
- Forum: ESP Easy: General Discussion
- Topic: Board Manager 2.1 released: somedoby tried it ?
- Replies: 2
- Views: 4707
Re: Board Manager 2.1 released: somedoby tried it ?
I saw that rel 2.1 of Board Manager has been released. Has somebody tried it out ? I just started a "compile" in the IDE, but got something like an "illegal variable type in serial config something" that stopped any further step.... :roll: For now, you can change line 116 in ser...
- 21 Feb 2016, 12:29
- Forum: ESP Easy: Projects / Applications
- Topic: Install ESPEasy with a Mac, esptool.py
- Replies: 2
- Views: 11468
Re: Install ESPEasy with a Mac, esptool.py
I'am trying to install ESPEasy on a ESP8266-01, it's black. I want to use ESPEasy with Domoticz. Flashing a nodeMCU with esptool.py works well. I did try to flash the 1024 k and 512 k binary images both from R78. Both images flash well with or without the parameter set: -fs 32m -fm dio -ff 40m at t...
- 06 Feb 2016, 16:39
- Forum: ESP Easy: Software
- Topic: no matching function for call to 'PubSubClient::PubSubClient(const char [1])'
- Replies: 4
- Views: 11910
Re: no matching function for call to 'PubSubClient::PubSubClient(const char [1])'
I followed this tutorial: http://www.esp8266.nu/index.php/Tutorial_Arduino_Firmware_Upload I pasted the libraries in the right folders and I updated all of them. after following all the steps is gain this error: 'emergencyReset' was not declared in this scope I simply "fixed" this error b...
- 24 Jan 2016, 12:21
- Forum: ESP Easy: Hardware
- Topic: build 70: HC-SR04 random values
- Replies: 4
- Views: 5564
Re: build 70: HC-SR04 random values
Hi, had the same problem using these part. It´s right, the trigger could be connect direct. I used also resistor network (4K7 and 10K) and that´s bullshit because we init a war between the Pull´s: an Down in your RNetwork an Up activted via Software (see the script to the HC04) I have been using a ...
- 23 Jan 2016, 20:01
- Forum: ESP Easy: Hardware
- Topic: build 70: HC-SR04 random values
- Replies: 4
- Views: 5564
Re: build 70: HC-SR04 random values
Hi, I connected a HC-SR04 via a level shifter (like this ). I have connected it via gpio4,5. Other devices I have is a DS18B20 and a light sensor, they both deliver good values. But the distance sensor show me values like 0.17 (when its meters, its ok from my desk to the ceiling) and often values l...
- 21 Jan 2016, 20:44
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy from github can't build...
- Replies: 1
- Views: 3949
Re: ESPEasy from github can't build...
You need to use Arduino IDE 1.6.5 for now to build ESPEasy.gorec2005 wrote:Help please!
i can't build ESPEasy from github - tryed latest arduino ide (today nigthly-build)
[...]
What can i do?
- Jan
- 21 Jan 2016, 13:59
- Forum: ESP Easy: Hardware
- Topic: DHT22 Problem
- Replies: 25
- Views: 32266
Re: DHT22 Problem
I also get false readings from AM2302(similar to DHT22), 5k1 resistor to data pin, 3.7v power(single liion cell). Using this in deep sleep mode, i think the priblem is in a sensor work after *awake* from sleep. temperature readings are 4 degrees error - humidity 50% error. Many people on the web re...
- 20 Jan 2016, 21:12
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291096
Re: ESP Easy Releases
Just tested with upgrade from R68 to R69 - worked flawlessly!Martinus wrote:- Adds OTA update using bin file upload through the ESP Easy webgui (NOT from arduino IDE):
- Jan
- 18 Jan 2016, 08:25
- Forum: ESP Easy: General Discussion
- Topic: Witch pin not to use
- Replies: 5
- Views: 7604
Re: Witch pin not to use
What are the pins i can not use... Then i see this... ScreenShot024.jpg Can i change this? What is the maximum pins i can use... What are the best pins for the Short pulses option: GPIO 0, 2 and 15 have special purposes during boot, and you must make sure that GPIO 0 and 2 is not pulled low during ...
- 17 Jan 2016, 19:41
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291096
Re: ESP Easy Releases
I am also very happy about software OTA upload. One question though - normally, Arduino IDE sketches contain initial configuration of device name, etc. What should be put there in order for the device to keep configuration after upload? The settings you define in espeasy.ino are the default values ...
- 17 Jan 2016, 19:40
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291096
Re: ESP Easy Releases
You are right. I'm currently running a total of 15 modules (production and test lab), being a mixture of ESP-01 and NodeMCU V1 modules. I have updated and tested them all using OTA and it's much faster and easier than serial update. :D :D :D I have been using OTA on several ESP8266 modules for some...
- 17 Jan 2016, 18:46
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291096
Re: ESP Easy Releases
This is a great addition - OTA makes it so much easier to update modules - especially those installed around the house!Martinus wrote:R68 is available on github:
- Fixes the CSS upload feature
- Adds OTA update using bin file upload through the ESP Easy webgui (NOT from arduino IDE):
- Jan
- 16 Jan 2016, 13:13
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291096
Re: ESP Easy Releases
My fault... sorry - it works perfectly fine nowMartinus wrote:Your valuename field seems empty in task settings. Its printed after the "/" but blank...
Code: Select all
/ESP008364/sysinfo/memory 30120.00
/ESP008364/sysinfo/uptime 197.00
- 16 Jan 2016, 10:45
- Forum: ESP Easy: Projects / Applications
- Topic: One ESP Max sensors
- Replies: 1
- Views: 3190
Re: One ESP Max sensors
But to get my pellet stove on and off should I give a command of 2-3 seconds Is there a possibility that the esp2866 little longer give a command. I should probably make a contact of 2-3 seconds to turn the stove on or off.. For example.. 3 seconds contact stove on, 3 seconds contact stove off. If ...
- 16 Jan 2016, 10:37
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291096
Re: ESP Easy Releases
R65 is available on github: Added a simple plugin device to send single values to the controller. I have tested this with the OpenHAB MQTT protocol and there's a cosmetical issue /ESP008364/dsw3/Temperature 21.25 /ESP008364/adc3/Analog 120.00 /ESP008364/memory/ 29936.00 Notice the trailing / after ...
- 16 Jan 2016, 10:34
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291096
Re: ESP Easy Releases
R64 is available for download on github, beware that it's development stuff... Added %uptime% as variable for display To be used for LCD/OLED display This works - thanks! Added padding to LCD/OLED display Fixes a 'bug' This does not work for me (tested in R65 and with LCD2004) See this photo http:/...
- 15 Jan 2016, 14:14
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291096
Re: ESP Easy Releases
Please, did you consider adding "dummy" sensor for monitoring uptime and additional system parameters? Idea is to have such sensor for troubleshooting, tracking restarts etc. which make sense once we are able to pull sensor values with json now. This has been requested by several other fo...
- 13 Jan 2016, 12:02
- Forum: ESP Easy: Software
- Topic: LCD - clear before write
- Replies: 7
- Views: 7128
Re: LCD - clear before write
Hi Martinus,Martinus wrote:Next build will use padding to solve this (both LCD and OLED)
Next build will have %uptime% as system variable.
Thank you very much for fixing/adding this
- Jan
- 13 Jan 2016, 11:17
- Forum: ESP Easy: Software
- Topic: LCD - clear before write
- Replies: 7
- Views: 7128
Re: LCD - clear before write
Maybe using thie Event Action plugin we have discussed before, say one time during the day/night? This way, we would be able to say, if the module is stable or not? This should probably be moved to a new thread, but it would surely be great to have virtual "sensors" to report stuff like -...
- 11 Jan 2016, 07:52
- Forum: ESP Easy: Software
- Topic: LCD - clear before write
- Replies: 7
- Views: 7128
LCD - clear before write
I have a module with R63 and a LCD2004. When I write something on the display, existing text is not cleared For instance, upon startup the first line says "ESPeasy" - if I write "test" on line 1, the display will read "testasy", and if I have a temperature reading sayin...
- 06 Jan 2016, 14:39
- Forum: ESP Easy: General Discussion
- Topic: Newbie Arduino Uno to ESP8266 - 12
- Replies: 5
- Views: 5886
Re: Newbie Arduino Uno to ESP8266 - 12
Question: Can I just use a voltage divider (Resistors) from the output of the Arduino to get it down to 3.3v? If yes would it be just a simple matter of connecting a wire from the output of the voltage divider into the esp8266 (Ground of Arduino & ESP conncted) Then I would configure espeasy to...
- 26 Dec 2015, 09:18
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 291096
Re: ESP Easy Releases
After running R43 for a while I upgraded to R57 last night (mainly to verify that the MQTT authentication did work - it did, thanks!) but also enabled NTP. It's an ESP12, with 10x DS18B20, 1x PCF8591, 1x HC-SR04 and 1x DHT-22. It has now been up for 553 minutes and seems stable
- Jan
- Jan
- 22 Dec 2015, 22:47
- Forum: ESP Easy: Software
- Topic: MySensors goes ESP!!
- Replies: 91
- Views: 103442
Re: MySensors goes ESP!!
No further plans in my roadmap yet. I would first like to see if this route has enough potential or need. So far, not many reactions, neither on Domoticz nor MySensors forum and my question on Domoticz forum about multiple sensors on a single node remain unanswered. Of course we're still a very sma...
- 22 Dec 2015, 22:43
- Forum: ESP Easy: Projects / Applications
- Topic: ESP-01 temp + hum on GPIO 0 - startup issue
- Replies: 2
- Views: 4513
Re: ESP-01 temp + hum on GPIO 0 - startup issue
I have created a module for driving a single relay, converting it from my previous DHT11 temperature module only. In order to avoid (or so I thought) an issue with GPIO 0 leading to programming mode, I have moved DHT11 to GPIO 0 and relay attached to GPIO 2. My limited experience with relays on GPI...
- 15 Dec 2015, 20:32
- Forum: ESP Easy: Projects / Applications
- Topic: Garage door control - emulate push button - how?
- Replies: 9
- Views: 14135
Re: Garage door control - emulate push button - how?
A relay?mkotek wrote:What should be done to effectively invoke the same action as ordinary push button does to control my garage door?
http://www.esp8266.nu/index.php/Relais
- Jan