Hello
My current code uses indices. But they make code less understandable than name and value. It is for this reason that I seek to use them.
In the page "tools ->Advanced" I can't find
"Allow TaskValueSet on all plugins:"

excuse english it's a google translation Hello I don't remember the .bin file I realized the flash in January 2012 with this version: ESP_Easy_mega_20210114_normal_ESP8285_1M I am looking to change the code made at the time and use the name and value of the virtual device Here is the code I am tryin...

HELLO, I created a virtual device name: DUREE_filtration value 1: calculatee value 2: effectuee if to update it I use taskValueSet,9,1,2515 taskValueSet,9,2,3025 It's OK However, if I use taskValueSet,DUREE_filtration,calculatee,2515 taskValueSet,DUREE_filtration,effecuee,3025 it does not work pleas...

I simply did a reboot

I reduced the config.dat file to 36k with Notepad ++ by removing the last lines. I reload it on the sonoff. I see that it returns to its original size of 64K

I use a basic sonoff R2 v1.4

Your diagnosis unfortunately confirms my fears. So I will change the module. But for space problems, I have to keep the same. Is it possible to use or modify (I don't have the skills to do it) the "Regulator - Level" plugin to avoid using the "config" command and therefore to sav...

Thank you for this clarification and for your availability.
Do you have a lead that would allow me to solve my blocking problem?

Thank you for this quick feedback. I waited to answer you until the thermostat was blocked in order to carry out the recommended modification test. I use a 1M flash I have a rule that reboots every day. The thermostat is blocked when the thermostat setpoint goes from 17.5 to 20. A modification in a ...

Hello, Hello, Have you seen the plugin? I have a thermostat that has worked well for a year with a schedule that changes the setpoint 4 times a day. For a few days, during a change of setpoint, the thermostat has remained blocked on "ON". A reboot does not unblock it. The power supply must...

Google translation I have an installation with three sonoffs fashed with Espeasy (build ESP_Easy_mega_20210114_normal_ESP8266_1M). They communicate with the Domoticz software installed on a raspberry 4 by the WiFi of the box. The PI4 is permanently connected to the box. Everything is working fine, I...

Google translation Thank you for the quick reply I will try with the expressive tool Even keeping the button pressed all the time I have these difficulties Can you tell me where to get the diagram of the cable you use Thank you Merci pour la réponse rapide je vais essayer avec l'outil expressif Même...

Google translation Hello, I still have difficulty flaher a sonoff. I use the tool "ESP.Easy.Flasher.exe" the flash often aborts, I restart it several times so that it manages to run completely. I then have three cases: 1) no boot: nothing on the serial port 2) start up with an uninterrupte...

Ok MERCI
J'attend votre retour
j'ai d'autre problème de flash. Mais avant de vous en parler, je vais parcourir le forum
OK, thanks
I'm waiting for your feedback
i have other flash problem. But before I tell you about it, I will browse the forum

Merci pour ce retour rapide Dans notepad++ je ne vois aucun caractère particulier J'utilise le tiret du 8 dans d'autre "event" sans soucis j'utilise la commande "config" pour après avoir modifier la valeur de la consigne enregistrer dans un "dimmer" pour mettre un jour...

bonjour , rédiger en francais et traduit avec google. write in french and translate with google. Quand j'ai cette regle tout est OK When I have this rule everything is OK on consigne_moins do timerSet,4,1 //démarre un timer pour éviter des changements trop rapides endon on Rules#Timer=4 do if [CONSI...

Merci je viens de faire cette rédaction on envoi_temp do" sendToHTTP,192.168.1.128,80,"/control?cmd=taskValueSet,4,2,[TEMP#Temp]" endon et le log est le suivant SendToHTTP: Host: 192.168.1.128 port: 80 Dans l'autre Sonoff l'information est bien reçue et prise en compte c'est donc OK D...

Merci de votre aide j'ai effectuée la mise à jour préconisée par Ath. Bien de j'avais déjà fait les tests préconisés par TD-er, je viens de les refaire sans succès Voila un exemple des logs obtenus sendToHTTP,192.168.1.128,80,/control?cmd=taskValueSet,'4,2,19.50' 5608149: Command: sendToHTTP 5608151...

Merci, pour la réponse en Anglais. Google me permet de traduire et de comprendre
J'ai ajouté le port 80, J'ai message d'erreur suivant

Bonjour, Je chauffe une pièce avec deux radiateurs commandés par chacun un thermostat réalisé avec un Sonoff Espeasy. Un des radiateurs (RAD_1 : ip 192.168.1.128) est posé dans un lieu de passage. Il est dont sensible aux variations de températeurs générées par les allées et venues. Je souhaite donc...

Hello,
I found how to write the command exactly:
192.168.1.128/control?cmd=config,task,Sonoff_thermostat_2,setlevel,30

Hello
I have the same problem.
  I place with chrome this order: <http://192.168.1.128/config,task,thermostat,setlevel,21>
It has no effect. I'm with the buid <mega-20191108>
thank you for your help