@xmenne
I am also planing to use the cable V2 sensor for my gasmeter.
on which GPIO port did you connect the sensor on the wemos?
thx
sawo
Search found 36 matches
- 23 Aug 2022, 12:15
- Forum: ESP Easy: Projects / Applications
- Topic: Cyble Sensor V2 ITRON
- Replies: 4
- Views: 8372
- 22 Dec 2021, 12:31
- Forum: ESP Easy: Software
- Topic: Rule doesn´t work...
- Replies: 9
- Views: 7334
Re: Rule doesn´t work...
Hi TD-er,
sorry that was a copy / past issue.
I will take a look at looptimer.
Thx
sawo
sorry that was a copy / past issue.
I will take a look at looptimer.
Thx
sawo
- 22 Dec 2021, 11:22
- Forum: ESP Easy: Software
- Topic: Rule doesn´t work...
- Replies: 9
- Views: 7334
Re: Rule doesn´t work...
Hi, I finally got the time to rework my setup, the proximity sensors are now configured as endpoint swichtes! :) As aspected I have some problems with my rules, maybe any one of you can assist my or give me a hint. Sorry for the maybe basic and stupid questions! First off all I want the rule to work...
- 06 Dec 2021, 14:49
- Forum: ESP Easy: Software
- Topic: Rule doesn´t work...
- Replies: 9
- Views: 7334
Re: Rule doesn´t work...
Hi Ath,
okay I will change my setup and use the inductive proximity sensor as endpoint switch.
ThX
Sascha
okay I will change my setup and use the inductive proximity sensor as endpoint switch.
ThX
Sascha
- 01 Dec 2021, 16:39
- Forum: ESP Easy: Software
- Topic: Rule doesn´t work...
- Replies: 9
- Views: 7334
Re: Rule doesn´t work...
Hi, this is hard for me to explain.... (english knowledge) but I will give it a try. The RC_Solar and _Normal are "LJ12A3-4-Z/AY inductive proximity sensor/switch" these are used as an endpoint of a 3 way ball valve. 3way.jpg Pumpe_Normal / _Solar are replays which control the motor to tur...
- 01 Dec 2021, 16:03
- Forum: ESP Easy: Software
- Topic: Rule doesn´t work...
- Replies: 9
- Views: 7334
Re: Rule doesn´t work...
Hi Ath :D it doesn´t turn on the GPIO 12 port. (else) Yes it is configured in the devices tab and works fine. when use cmd GPIO,12,1 / 0 all other devices also work fine. devices.JPG This is my complete rule: On RC_Normal#State=0 Do GPIO,14,0 TaskValueSet 7,1,0 EndOn On Schalter_Normal#State=1 Do if...
- 01 Dec 2021, 15:06
- Forum: ESP Easy: Software
- Topic: Rule doesn´t work...
- Replies: 9
- Views: 7334
Rule doesn´t work...
Hi all,
I hope anyone could help me with my rule.
It won´t start.
On Schalter_Solar#State=1 Do
if [RC_Solar#State]=0
GPIO,12,0
TaskValueSet 6,1,0
else
GPIO,12,1
EndIf
EndOn
The only thing which is set is the "TaskValueSet 6,1,0".
thx
sawo
I hope anyone could help me with my rule.
It won´t start.
On Schalter_Solar#State=1 Do
if [RC_Solar#State]=0
GPIO,12,0
TaskValueSet 6,1,0
else
GPIO,12,1
EndIf
EndOn
The only thing which is set is the "TaskValueSet 6,1,0".
thx
sawo
- 01 Dec 2021, 15:02
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Re: Wemos D1 mini - which GPIO ports for relays?
Hi Ath,
everything works fine for me!!!!
Thanks a lot for your help, hope to finally to complete my project!!!!
Sawo
everything works fine for me!!!!
Thanks a lot for your help, hope to finally to complete my project!!!!
Sawo
- 29 Nov 2021, 21:44
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Re: Wemos D1 mini - which GPIO ports for relays?
Hi Ath,
will try it tomorrow.
Thanks a lot for your assistance.
Sawo
will try it tomorrow.
Thanks a lot for your assistance.
Sawo
- 29 Nov 2021, 18:46
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Re: Wemos D1 mini - which GPIO ports for relays?
Hi Ath,
thx works for me so far!!!
Is it possible to get the status of each relay seperatly?
Instead of in one state.
thx
sawo
thx works for me so far!!!
Is it possible to get the status of each relay seperatly?
Instead of in one state.
thx
sawo
- 29 Nov 2021, 15:18
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Re: Wemos D1 mini - which GPIO ports for relays?
Hi Ath,
I updated my wemos with your version.
The relay modul is conencted and recognized.
But how do I controll them?
What is the command?
Regards
Sascha
I updated my wemos with your version.
The relay modul is conencted and recognized.
But how do I controll them?
What is the command?
Regards
Sascha
- 29 Nov 2021, 11:59
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Re: Wemos D1 mini - which GPIO ports for relays?
Hi Ath,
sorry I was quite busy in the last days.
No I didn´t had the time to test ist yet. But will do in the evening.
Thanks so far!
Sawo
sorry I was quite busy in the last days.
No I didn´t had the time to test ist yet. But will do in the evening.
Thanks so far!
Sawo
- 18 Nov 2021, 10:26
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
- 18 Nov 2021, 07:20
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
- 17 Nov 2021, 21:12
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Re: Wemos D1 mini - which GPIO ports for relays?
@ATH
sorry haven´t read your previous post.
Thanks for your info and your effort!!!!
I try to be patient.
sawo
sorry haven´t read your previous post.
Thanks for your info and your effort!!!!
I try to be patient.
sawo
- 17 Nov 2021, 21:04
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Re: Wemos D1 mini - which GPIO ports for relays?
I hope that it is okay to post the web link IF NOT PLEASE DELETE
https://wiki.seeedstudio.com/Grove-4-Ch ... PDT_Relay/
https://wiki.seeedstudio.com/Grove-4-Ch ... PDT_Relay/
- 17 Nov 2021, 20:08
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Re: Wemos D1 mini - which GPIO ports for relays?
Hi all, thanks a lot your your answers. I have decided to use a separate Wemos D1 since I changed my plans, to get my pool solar Control to work. But now I have a different problem, I bought a 4 channel SPDT relay v1.0 board from seeed, this connects via I2C interface. My problem now is that it is n...
- 12 Nov 2021, 11:53
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Re: Wemos D1 mini - which GPIO ports for relays?
Hi dynamicdave,
thanks for your answer, so in this case I think I will use a seperate wemos to controll the relays.
Thanks
sawo
thanks for your answer, so in this case I think I will use a seperate wemos to controll the relays.
Thanks
sawo
- 12 Nov 2021, 10:54
- Forum: ESP Easy: Hardware
- Topic: Wemos D1 mini - which GPIO ports for relays?
- Replies: 30
- Views: 19791
Wemos D1 mini - which GPIO ports for relays?
Hi all,
I hope you can help me with my current issue.
I need to connect 2 more relays to my wemos d1 mini runnig espeasy.
The only GPIO ports which are free / not used are GPIO 0/1/2/3/15
Which ones would you use to connect a relays?
thx
sawo
I hope you can help me with my current issue.
I need to connect 2 more relays to my wemos d1 mini runnig espeasy.
The only GPIO ports which are free / not used are GPIO 0/1/2/3/15
Which ones would you use to connect a relays?
thx
sawo
- 05 Nov 2020, 13:57
- Forum: ESP Easy: Software
- Topic: Rules for bathroom ventilation
- Replies: 7
- Views: 22333
Re: Rules for bathroom ventilation
Hi grovkillen,
do you think you can help me again with this rule?
I want to have a short delay of 30sec, before the fan turns on, when the lux value is greater then 100.
How can I realize this.
thx
sawo
do you think you can help me again with this rule?
I want to have a short delay of 30sec, before the fan turns on, when the lux value is greater then 100.
How can I realize this.
thx
sawo
- 16 Jun 2020, 21:11
- Forum: ESP Easy: Software
- Topic: Rules for bathroom ventilation
- Replies: 7
- Views: 22333
Re: Rules for bathroom ventilation
hi grovkillen,
thanks alot for your help again!!!
It works!!!
Thanks
thanks alot for your help again!!!
It works!!!
Thanks
- 16 Jun 2020, 20:55
- Forum: ESP Easy: Software
- Topic: Rules for bathroom ventilation
- Replies: 7
- Views: 22333
Rules for bathroom ventilation
Hi all, could any one please assist me with a espeasy rule? I would like to setup an bathroom ventilation rule, so when the lux value is above 100 and/or the humidity is above 65 the fan should turn on and stay on for 5min. I am using a wemos d1, dht22 and a bh1750. This is the rule I have to far: b...
- 22 Apr 2020, 08:02
- Forum: Experimental
- Topic: Old LCD with ESP ?
- Replies: 3
- Views: 25331
Re: Old LCD with ESP ?
Hi TD-er,
okay I'll take it apart and see what's in it.
THX
okay I'll take it apart and see what's in it.
THX
- 21 Apr 2020, 14:13
- Forum: Experimental
- Topic: Old LCD with ESP ?
- Replies: 3
- Views: 25331
Old LCD with ESP ?
Hi all,
do you think it is possible to use an old lcd display from an thermometer, such as this one (see attachment) to controll it via an esp?
I want to show the temperatur from the aquarium.
Regards
Sascha
do you think it is possible to use an old lcd display from an thermometer, such as this one (see attachment) to controll it via an esp?
I want to show the temperatur from the aquarium.
Regards
Sascha
- 01 Apr 2020, 09:19
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
@grovkillen
thanks a lot for helping, I have created an issue.
thanks a lot for helping, I have created an issue.
- 31 Mar 2020, 23:49
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
Hi grovkillen, thanks a lot for explaining. But the issue still exists, I think that the interval of the RDM6300 is set to high. When I quickly put the tag on and off it only swichtes once, but if I old it on for about a 1/1,5 second it will switch 2 or more times. Is there a possibility to pause th...
- 31 Mar 2020, 19:50
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
Hi grovkillen,
thanks a lot for helping me.
One question, what does the [VAR1#!Z] stand for, do I need to create a variable or device?
When I copy your rule nothing happends, what do you need to know from my setup?
thx
thanks a lot for helping me.
One question, what does the [VAR1#!Z] stand for, do I need to create a variable or device?
When I copy your rule nothing happends, what do you need to know from my setup?
thx
- 31 Mar 2020, 19:27
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
here you go.
on water_on do
gpio,4,1
endon
on water_off do
gpio,4,0
endon
on rfid_tag_water#Tag do
timerSet,1,2
if [water_pump#On]=1
event,water_off
else
event,water_on
endif
endon
THX
on water_on do
gpio,4,1
endon
on water_off do
gpio,4,0
endon
on rfid_tag_water#Tag do
timerSet,1,2
if [water_pump#On]=1
event,water_off
else
event,water_on
endif
endon
THX
- 31 Mar 2020, 18:58
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
Hi grovkillen,
sorry that makes no difference.
Even when I remove this part of the rule:
On Rules#Timer=1 do
TaskValueSetAndRun,1,1,-3342336
SendToHTTP 192.168.1.10,8181,x.exe?Antwort=dom.GetObject("Tag").State(0)
endon
it still switches twince or even more often.
Sawo
sorry that makes no difference.
Even when I remove this part of the rule:
On Rules#Timer=1 do
TaskValueSetAndRun,1,1,-3342336
SendToHTTP 192.168.1.10,8181,x.exe?Antwort=dom.GetObject("Tag").State(0)
endon
it still switches twince or even more often.
Sawo
- 31 Mar 2020, 17:34
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
So now it tested my new rules: on water_on do gpio,4,1 endon on water_off do gpio,4,0 endon on rfid_tag_water#Tag do timerSet,1,2 if [water_pump#On]=1 event,water_off else event,water_on endif endon On Rules#Timer=1 do TaskValueSet,1,1,0 endon but when I hold the token on the reader it always switch...
- 31 Mar 2020, 13:40
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
Hi TD-er, I have removed it, now it will reboot after 44 seconds. Maybe I´ll some thing different. Once the rfid token is placed on the reader it will turn on the valve until I place the token again on the reader. In this case I will not send so much data. Could any one help me with this rule or giv...
- 31 Mar 2020, 13:24
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
When I remove the rules and place the rfid token on the reader, it will reboot after 70 seconds.
- 31 Mar 2020, 13:21
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
Hi,
attached you´ll find a picture of the device settings.
Nothing to change or setup.
Sawo
attached you´ll find a picture of the device settings.
Nothing to change or setup.
Sawo
- 31 Mar 2020, 12:53
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
Hi, so last night I had time to learn about the rules and I have managed to create the rules. The value will be set to "0" when token is removed.:-) But now I have the next issue, the rule causes the wemos to reboot after 24 seconds..... and also the load will be by 100% Could any one chec...
- 27 Mar 2020, 08:08
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
Re: RFID update values when removing tag
hi grovkillen,
thanks for your reply.
Okay I'll give it a try. Never set up a rule in espeasy before
thanks
sawo
thanks for your reply.
Okay I'll give it a try. Never set up a rule in espeasy before
thanks
sawo
- 26 Mar 2020, 12:33
- Forum: ESP Easy: General Discussion
- Topic: RFID update values when removing tag
- Replies: 22
- Views: 13580
RFID update values when removing tag
Hi all, I would like to apologize in advance if this has already been asked several times before. My current project is to control a water hose with a RFID token. Current setup: - Wemos D1 mini (espeasy) - RDM6300 RFID - Relais for magnetic valve - Homematic (Generic HTTP controller) - iobroker (rul...