Search found 11 matches
- 28 Nov 2020, 04:42
- Forum: ESP Easy: Software
- Topic: Factory Reset via Reset Button
- Replies: 0
- Views: 12988
Factory Reset via Reset Button
A feature suggestion, which resulted from a recent application of ESPEasy in a home automation project: Factory Reset via Double (or Tripple) push of the reset button. Sometimes it is useful to factory reset a device and return to AP selection mode, without connecting the ESP to the PC for re-flashi...
- 28 Nov 2020, 01:03
- Forum: ESP Easy: Software
- Topic: Arithmetic in GPIO command with dummy values [solved]
- Replies: 5
- Views: 11175
Re: Arithmetic with dummy values
I had a look at the source code, and wow, there was this little bugger: // Only if TmpStr starts with '=' then call Calculate(). Otherwise do not call it if (TmpStr[0] != '=') { returnValue = str2int(TmpStr); } else { So the following works: gpio 0,=1-[CFG#inv0] log: 87328352: ACT : gpio 0,=1-1 8732...
- 28 Nov 2020, 00:27
- Forum: ESP Easy: Software
- Topic: Arithmetic in GPIO command with dummy values [solved]
- Replies: 5
- Views: 11175
Re: Arithmetic with dummy values
Thanks for the replies, I tried both but neither worked: With CFG#inv0=0 , The first solution gave me: gpio 0,(1-[CFG#inv0]) log: 84991164: ACT : gpio 0,(1-0) 84991166: GPIO : port#0: set to 0 The second solution gave me: gpio 0,[!CFG#inv0] log: 85147628: ACT : gpio 0, 85147630: GPIO : port#0: set t...
- 27 Nov 2020, 05:05
- Forum: ESP Easy: Software
- Topic: Arithmetic in GPIO command with dummy values [solved]
- Replies: 5
- Views: 11175
Re: Arithmetic with dummy values
Here is corresponding log output. CFG#inv0 was 1, so I'd expect GPIO-0 to be set to 0, but it ended up a 1: 15473617: ACT : gpio 0,1-1 15473619: GPIO : port#0: set to 1 15473622: ACT : gpio 2,1 15473624: GPIO : port#2: set to 1 15473710: SW : GPIO=0 State=1 Output value=1 15473746: SW : GPIO=2 State...
- 27 Nov 2020, 04:48
- Forum: ESP Easy: Software
- Topic: Arithmetic in GPIO command with dummy values [solved]
- Replies: 5
- Views: 11175
Arithmetic in GPIO command with dummy values [solved]
I have a simple rule which sets 2 GPIOs to opposite polarity. I am using a dummy device CFG with a value inv0 to configure the polarity, like this: gpio 0,1-[CFG#inv0] gpio 2,[CFG#inv0] CFG#inv0 is either 0 or 1, The second GPIO command works as expected, however the expression in the first GPIO com...
- 08 Nov 2020, 02:43
- Forum: ESP Easy: Software
- Topic: sendTo UDP reliability
- Replies: 3
- Views: 6194
sendTo UDP reliability
I am running into an issue with Inter-ESPEasy UDP packet drops. About 1 in 20 SendTo commands get dropped. This is my setup: - 5 ESP8266 (Wemos D1 minis) in Inter-ESPEasy Network, controlling 10 roller shades - each ESP controls 2 roller shade motors, the Wemos board is powered via buck converter fr...
- 08 Nov 2020, 01:56
- Forum: ESP Easy: Software
- Topic: simple web output [feature request]
- Replies: 14
- Views: 14224
Re: simple web output [feature request]
I use it for a simple web page hosted on the ESP itself, so I do not need any external hubs or web server, and I can still control lights, roller shades, etc. from my phone. The web page triggers rule events. Basic example: <head><title>Shade Control</title></head> <body> <div class="content&qu...
- 27 Oct 2020, 02:10
- Forum: ESP Easy: Software
- Topic: simple web output [feature request]
- Replies: 14
- Views: 14224
Re: simple web output [feature request]
Reviving this thread, does the template processing still work? I tried espeasy mega 20200829, but the {{tags}} do not get replaced,
- 09 Oct 2020, 04:54
- Forum: ESP Easy: General Discussion
- Topic: Sonoff Relay, UDP SendTo, and Wifi interference
- Replies: 2
- Views: 5924
Sonoff Relay, UDP SendTo, and Wifi interference
I ran into an interesting issue, when trying to use Global Sync / ESPEasy P2P to network several Sonoff BASIC relays. It seems that RF interference is caused by the Sonoff relay, which causes UDP packets dopped over Wifi. I thought I report my finding, in case anybody runs into it. I used 2 Sonoff B...
- 09 Oct 2020, 03:39
- Forum: ESP Easy: Hardware
- Topic: WIFI : Disconnected! Reason: '(200) Beacon timeout'
- Replies: 74
- Views: 146548
Re: WIFI : Disconnected! Reason: '(200) Beacon timeout'
yes, I flashed empty 1MB image between versions
- 08 Oct 2020, 06:16
- Forum: ESP Easy: Hardware
- Topic: WIFI : Disconnected! Reason: '(200) Beacon timeout'
- Replies: 74
- Views: 146548
Re: WIFI : Disconnected! Reason: '(200) Beacon timeout'
I am also facing the same issue on Sonoff BASIC R2 PCB V1.1 (ESP8266EX/1MB flash) with Release mega-20200929 Flash command: esptool --port /dev/ttyUSB0 --baud 115200 write_flash -fm dout -fs 1MB 0x00000 ESP_Easy_mega_20200929_normal_ESP8266_1M.bin 60254 : Info : WIFI : Disconnected! Reason: '(200) B...