Search found 86 matches
- 07 Apr 2024, 15:21
- Forum: ESP Easy: General Discussion
- Topic: little rule fan bathroom timerset ?
- Replies: 6
- Views: 207
Re: little rule fan bathroom timerset ?
That's a totally different use-case, AFAICS, you could have started a new thread for this. ok I'll open a new post t starts to look like a school assignment we're solving for you, correct? i've 65 year , retired , I left school at 15 , self-taught , that's why my english is bad, even with the trans...
- 06 Apr 2024, 17:40
- Forum: ESP Easy: General Discussion
- Topic: little rule fan bathroom timerset ?
- Replies: 6
- Views: 207
Re: little rule fan bathroom timerset ?
ok ,thank's , I need to understand the logic of espeasy exemple , i try a slide gate security by watt detection device > PZEM-004T interval 1s LongPulse_mS,14,1,600 > impulse sens < -- > if > 100 watt start detection timer 3s after 3s if watt > 400 then secu event ( impulse - wait 2s -impulse) and m...
- 06 Apr 2024, 11:28
- Forum: ESP Easy: General Discussion
- Topic: little rule fan bathroom timerset ?
- Replies: 6
- Views: 207
Re: little rule fan bathroom timerset ?
thank , I'm trying to understand , my english it's verry bad
%eventvalue1% = sonde#humidity ? because it is in on -- endon ?
timerset as always "on rules#timer=x do " for expired timer ?
%eventvalue1% = sonde#humidity ? because it is in on -- endon ?
timerset as always "on rules#timer=x do " for expired timer ?
- 06 Apr 2024, 10:01
- Forum: ESP Easy: General Discussion
- Topic: little rule fan bathroom timerset ?
- Replies: 6
- Views: 207
little rule fan bathroom timerset ?
hello,
i want wait 30mn after humidity <65 when the gpio 12 is on
but no work
my rules
i want wait 30mn after humidity <65 when the gpio 12 is on
but no work
my rules
Code: Select all
Let,1,0
on sonde#Humidity<65 do
if [var#1]=1
Timerset,1,1800 // wait 30mn before gpio 12,0
Let,1,0
endif
gpio,12,0
endon
on sonde#Humidity>75 do
gpio,12,1
Let,1,1
endon
- 05 Dec 2023, 11:06
- Forum: ESP Easy: General Discussion
- Topic: reset PZEM-004T in rules
- Replies: 4
- Views: 3279
Re: reset PZEM-004T in rules
ok ,thank you
I use it to safely control a sliding gate , I'm going to do a reset every time I stop sliding gate
I use it to safely control a sliding gate , I'm going to do a reset every time I stop sliding gate
- 05 Dec 2023, 10:33
- Forum: ESP Easy: General Discussion
- Topic: reset PZEM-004T in rules
- Replies: 4
- Views: 3279
reset PZEM-004T in rules
Hello,
i see what reset PZEM-004T with http://*espeasyip*/control?cmd=resetenergy,*PZEM address*
but in rules , i can use sendtohttp or other function ??
thank
i see what reset PZEM-004T with http://*espeasyip*/control?cmd=resetenergy,*PZEM address*
but in rules , i can use sendtohttp or other function ??
thank
- 16 Oct 2023, 16:51
- Forum: ESP Easy: General Discussion
- Topic: gpio14 esp12f always value 0 ??
- Replies: 15
- Views: 1811
- 16 Oct 2023, 16:44
- Forum: ESP Easy: General Discussion
- Topic: gpio14 esp12f always value 0 ??
- Replies: 15
- Views: 1811
Re: gpio14 esp12f always value 0 ??
I'm so sorry.
when I tell you it's not my day
I made a mistake
not GPIO4 but GPIO5
and now it's ok
thank you
when I tell you it's not my day
I made a mistake
not GPIO4 but GPIO5
and now it's ok
thank you
- 16 Oct 2023, 15:17
- Forum: ESP Easy: General Discussion
- Topic: gpio14 esp12f always value 0 ??
- Replies: 15
- Views: 1811
Re: gpio14 esp12f always value 0 ??
yes i've tryed debonce and interval = 0
- 16 Oct 2023, 14:53
- Forum: ESP Easy: General Discussion
- Topic: gpio14 esp12f always value 0 ??
- Replies: 15
- Views: 1811
Re: gpio14 esp12f always value 0 ??
thank's but with opto it's good , that's why I'm not going any further other problem , it's not my day !!! i've put a push button on GPIO 04 of my esp12 in hardware > Pin mode GPIO-4 (D2) > input pullup i2c interface none none in Devices : Switch input - Switch name piet Enabled: checked Internal Pu...
- 13 Oct 2023, 14:13
- Forum: ESP Easy: General Discussion
- Topic: gpio14 esp12f always value 0 ??
- Replies: 15
- Views: 1811
Re: gpio14 esp12f always value 0 ??
it's coming from the relay module
with relay with opto it's good
with relay with opto it's good
- 13 Oct 2023, 10:36
- Forum: ESP Easy: General Discussion
- Topic: gpio14 esp12f always value 0 ??
- Replies: 15
- Views: 1811
Re: gpio14 esp12f always value 0 ??
yes sorry for comma , but
when start with power , the gpio is 1
if i do control?cmd=GPIO,14,0
state value is 0
if i do control?cmd=GPIO,14,1
state value is 1 but hardware is 0
and always hardware 0 ( multimeter )
when start with power , the gpio is 1
if i do control?cmd=GPIO,14,0
state value is 0
if i do control?cmd=GPIO,14,1
state value is 1 but hardware is 0
and always hardware 0 ( multimeter )
- 13 Oct 2023, 10:01
- Forum: ESP Easy: General Discussion
- Topic: gpio14 esp12f always value 0 ??
- Replies: 15
- Views: 1811
gpio14 esp12f always value 0 ??
Hello,
i no understand , that i put
gpio14 output low or ouput high or default
or control?cmd=GPIO,14.1
the state value is always 0
i have firmware ESP_Easy_mega_20230930_energy_ESP8266_4M1M
i no understand , that i put
gpio14 output low or ouput high or default
or control?cmd=GPIO,14.1
the state value is always 0
i have firmware ESP_Easy_mega_20230930_energy_ESP8266_4M1M
- 10 Oct 2023, 10:41
- Forum: ESP Easy: General Discussion
- Topic: where find collection ?
- Replies: 2
- Views: 633
Re: where find collection ?
ok , thank you , i put the link in my bookmark
- 10 Oct 2023, 10:29
- Forum: ESP Easy: General Discussion
- Topic: where find collection ?
- Replies: 2
- Views: 633
where find collection ?
Hello , i find PZEM-004Tv3
i see https://espeasy.readthedocs.io/en/lates ... /P102.html
but for the firmware esp8266 how to find it ?
between collection a ...g , custom , normal .....
i no understand
thank you
i see https://espeasy.readthedocs.io/en/lates ... /P102.html
but for the firmware esp8266 how to find it ?
between collection a ...g , custom , normal .....
i no understand
thank you
- 27 Mar 2023, 08:58
- Forum: ESP Easy: General Discussion
- Topic: command exist for timezone ?
- Replies: 6
- Views: 1694
Re: command exist for timezone ?
thank you chromo23 for the tip,
I will be able to make a script to send on several at each time change
i understand the restricted TD-er , thank you for this presision
I will be able to make a script to send on several at each time change
i understand the restricted TD-er , thank you for this presision
- 26 Mar 2023, 18:55
- Forum: ESP Easy: General Discussion
- Topic: command exist for timezone ?
- Replies: 6
- Views: 1694
Re: command exist for timezone ?
thank you , but i try
http://192.168.1.10/control?cmd=timezone:120 or
http://192.168.1.10/control?cmd=TimeZone:120 or
http://192.168.1.10/control?cmd=timezone,120 or
http://192.168.1.10/control?cmd=TimeZone,120
nothing
Command unknown: timezone,120
http://192.168.1.10/control?cmd=timezone:120 or
http://192.168.1.10/control?cmd=TimeZone:120 or
http://192.168.1.10/control?cmd=timezone,120 or
http://192.168.1.10/control?cmd=TimeZone,120
nothing
Command unknown: timezone,120
- 26 Mar 2023, 15:15
- Forum: ESP Easy: General Discussion
- Topic: command exist for timezone ?
- Replies: 6
- Views: 1694
command exist for timezone ?
hello ,
Is there a command for timezone as for example ?
http://192.168.1.10/?cmd=timezone:120
thank you
Is there a command for timezone as for example ?
http://192.168.1.10/?cmd=timezone:120
thank you
- 29 Nov 2022, 19:13
- Forum: ESP Easy: General Discussion
- Topic: 8 relay next mqtt
- Replies: 12
- Views: 2291
Re: 8 relay next mqtt
ok , it works ,I had forgotten to put in controllers > mqtt > controller subcribe > actions_bouton
- 29 Nov 2022, 15:53
- Forum: ESP Easy: General Discussion
- Topic: 8 relay next mqtt
- Replies: 12
- Views: 2291
Re: 8 relay next mqtt
ok ,i try but in log error MQTT : Connection lost 6996172: ACT : Publish 'actions_bouton/sonnette/status', 3 6996204: ACT : Publish 'actions_bouton/fontaine/status', 0 6996226: MQTT : Connection lost, state: Disconnected 6996254: ACT : Publish 'actions_bouton/bassin/status', 2 6996374: IMPT : Error ...
- 24 Nov 2022, 15:15
- Forum: ESP Easy: General Discussion
- Topic: 8 relay next mqtt
- Replies: 12
- Views: 2291
Re: 8 relay next mqtt
or give me the format that I have to publish of mqtt server
thank you
thank you
- 24 Nov 2022, 14:14
- Forum: ESP Easy: General Discussion
- Topic: 8 relay next mqtt
- Replies: 12
- Views: 2291
Re: 8 relay next mqtt
i've delete slash and device put " sonnette#1 " now in log i 86259575: MQTT : Connected to broker with client ID: relais_8_0 86259576: Subscribed to: actions_bouton 86259582: EVENT: MQTT#Connected 86259592: IMPT : [rel2#Value1] subscribed to sonnette#1 86259830: MQTT : Connection lost, sta...
- 24 Nov 2022, 11:52
- Forum: ESP Easy: General Discussion
- Topic: 8 relay next mqtt
- Replies: 12
- Views: 2291
Re: 8 relay next mqtt
ma config :
i receiv with mqtt broser
- 24 Nov 2022, 11:25
- Forum: ESP Easy: General Discussion
- Topic: 8 relay next mqtt
- Replies: 12
- Views: 2291
Re: 8 relay next mqtt
i use mosqitto broker on linux
is what openhab is good with mosquitto ?
because i have nothing , not even a mistake in log espeasy
is what openhab is good with mosquitto ?
because i have nothing , not even a mistake in log espeasy
- 23 Nov 2022, 16:18
- Forum: ESP Easy: General Discussion
- Topic: 8 relay next mqtt
- Replies: 12
- Views: 2291
8 relay next mqtt
hello , always next project 8 relay with esp8266 , where i thank's TD-er and chromo23 for the post https://www.letscontrolit.com/forum/viewtopic.php?t=9359 now I go for it with mqtt , but it doesn't go the way I want i have put in "Home Assistant (openHAB) MQTT" IP , port , Controller Subs...
- 23 Nov 2022, 14:17
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
" can you test it and report? "
yes it work , a big thank you
yes it work , a big thank you
- 22 Nov 2022, 15:38
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
" can you test it and report? " , as soon as I have a moment, I test
I'm thinking of upgrading , with mqtt and html for each relay
exemple :
I'm thinking of upgrading , with mqtt and html for each relay
exemple :
- 22 Nov 2022, 11:43
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
For example: - relais 1 - GPIO 13, inverted logic: "0" is "on" - When: %syssec_d% > 28800 and %syssec_d% < 72000 - forced on without %syssec_d% > 28800 and %syssec_d% < 72000 - forced off without %syssec_d% > 28800 and %syssec_d% < 72000 and for - relais 3 - same thing - add stop...
- 22 Nov 2022, 10:44
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
it's my working 8 relay esp8266
be able to modify the action of each relay , ( on , off , on auto with schedule )
be able to modify the action of each relay , ( on , off , on auto with schedule )
- 21 Nov 2022, 17:18
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
I had thought about it , but i will have to reboot at each variable change ?
- 21 Nov 2022, 16:54
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
yes , than you you can verifier the final code ? // relais //1=13,2=12,3=14,4=16,5=4,6=5,7=3,8=1 Let,1,0 Let,2,0 Let,11,0 // relais 1 > 0 = arret , 1 = marche force , 2 = marche auto sonnette Let,12,0 // relais 2 > 0 = arret , 1 = marche force , 2 = marche auto fontaine Let,13,0 // relais 3 > 0 = ar...
- 21 Nov 2022, 16:01
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
with the toggle code , this ( with new code ), it's good ?
Code: Select all
if [Var#13]=2 and %syssec_d% > 36000 and %syssec_d% < 68400 //de 10h a 19h
Let,1,1
elseif [Var#12]=1
gpio,14,0
Else
Let,1,0
Endif
endif
- 21 Nov 2022, 15:56
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
sorry , another bad paste On Rules#Timer=1 Do If [Var#1]=1 GPIOToggle,14 Else GPIO,14,1 Endif Endon On Clock#Time=All,**:** Do If %syssec_d% > 36000 and %syssec_d% < 68400 //de 10h a 19h Let,1,1 // 1 = pompe bassin en marche Else Let,1,0 Endif Endon
- 21 Nov 2022, 15:49
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
ok ,sorry , I had modified in my code, but not in the paste
- 21 Nov 2022, 15:37
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
ok for 1 minute but you lost me with toggle i want start and stop gpio 14 every 15 minutes of 10h am to 7h pm the code work : On System#Boot Do LoopTimerSet,1,900 Endon On Rules#Timer=1 Do If [Var#1]=1 GPIOToggle,14 Else GPIO,14,1 Endon On Clock#Time=All,**:** Do If %syssec_d% > 36000 and %syssec_d%...
- 21 Nov 2022, 15:16
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
yes ok , but if , by example , i want start relay 6 ( gpio 5 ) with Let variable without time ?,
- 21 Nov 2022, 15:06
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
ok , i understand
why 1min later?
why 1min later?
- 21 Nov 2022, 14:32
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
hi , thank you , i've redone my rules for 8 relay where let variable if 0 = stop , 1 = forced work , automatique work it's good for you ?? // relais //1=13,2=12,3=14,4=16,5=4,6=5,7=3,8=1 Let,1,0 Let,2,0 Let,11,0 // relais 1 > 0 = arret , 1 = marche force , 2 = marche auto Let,12,0 // relais 2 > 0 = ...
- 21 Nov 2022, 10:13
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
?? ,example , because i do google translate , my english is very bad
- 21 Nov 2022, 10:03
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
yes good idea
- 21 Nov 2022, 09:43
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
yes , hi have missing endif , but it works !! On Rules#Timer=1 Do If [Var#1]=1 GPIOToggle,14 Else GPIO,14,1 endif Endon for this : On Clock#Time=All,**:** Do If %syssec_d% > 36000 and %syssec_d% < 68400 //de 10h a 19h Let,1,0 // 1 = pump start 0 =pump stop Else Let,1,0 Endif If %syssec_d% > 3600 and...
- 20 Nov 2022, 13:39
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
no problem : origine : On System#Boot Do LoopTimerSet,1,900 Endon On Rules#Timer=1 Do If [Var#1]=1 GPIOToggle,14 Else GPIO,14,1 Endon On Clock#Time=All,**:** Do If %syssec_d% > 36000 and %syssec_d% < 68400 //de 10h a 19h Let,1,0 // 1 = pompe bassin en marche Else Let,1,0 Endif modif : On System#Boot...
- 20 Nov 2022, 11:42
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
ok , the algorithm is good , it took a long time , I was able to access it and correct the error
thank you very much
thank you very much
- 19 Nov 2022, 17:37
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
in Clock#time=all,**:** do
it reboot , reboot .....
it reboot , reboot .....
- 19 Nov 2022, 16:51
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
Re: error if and ife
yes in the rules , i've no access at serial log
- 19 Nov 2022, 16:45
- Forum: ESP Easy: General Discussion
- Topic: error if and ife
- Replies: 53
- Views: 5450
error if and ife
hello, on esp8266 i have do a error , i have put ife instead if
now , i've no access
is there any way to get the access back?
thank you
now , i've no access
is there any way to get the access back?
thank you
- 28 Jul 2022, 13:56
- Forum: ESP Easy: General Discussion
- Topic: [solved]mqtt button ?
- Replies: 3
- Views: 2598
Re: mqtt button ?
ok , iv'e renamed the mqtt states by value now , in my mqtt server i have channel : actions_bouton topics : sonnette if i put in rules : Publish sonnette_status auto mqtt server not receive i do : in controllers : openhab(mqtt) enable with ip , Controller Subscribe : actions_bouton/# and Controller ...
- 27 Jul 2022, 17:16
- Forum: ESP Easy: General Discussion
- Topic: [solved]mqtt button ?
- Replies: 3
- Views: 2598
Re: mqtt button ?
ok ,
i use "ESP_Easy_mega_20220616_normal_ESP8266_4M1M"
i think have a probleme , because some buttons has three state ( on, off , auto)
I need to rename the mqtt states?
ex : on > 1 , off > 2 , auto >3
and after for link mqtt with dummy in rules ?
i use "ESP_Easy_mega_20220616_normal_ESP8266_4M1M"
i think have a probleme , because some buttons has three state ( on, off , auto)
I need to rename the mqtt states?
ex : on > 1 , off > 2 , auto >3
and after for link mqtt with dummy in rules ?
- 27 Jul 2022, 16:17
- Forum: ESP Easy: General Discussion
- Topic: [solved]mqtt button ?
- Replies: 3
- Views: 2598
[solved]mqtt button ?
hello, before I start, I would like to know if it is possible i've mqtt server , the channel is : actions_bouton i publish : sonnette#on , sonnette#off from the espeasy side I would like example : On Clock#Time=All,**:** Do if mqtt#sonnette = on if %syssec_d% > 28800 and %syssec_d% < 72000 //de 7h a...
- 23 Jul 2022, 18:22
- Forum: ESP Easy: General Discussion
- Topic: vl53l0x lost !!
- Replies: 6
- Views: 3263
Re: vl53l0x lost !!
thank you , it's work , with range normal > 0 , but with range long it's good