@Ath Hope all is well! I Need to update a few old devices. Any chance the last release has the new Atlus HUM code in it? Or should i keep on using that last build you created for me? Also has there been an updated on the CSS formatting "issue"? Going to read up on the latest release tomorr...

Looks like its https. I'm going to try to setup the influxdb locally and send sensor data vis UDP

Has anyone got espeasy to send sensor data to InfluxDB cloud successfully? I have been trying with rules and HTTP Advanced and am only getting connection errors.

dam you're good! Worked like a charm. Up and running 100% now.

Thanks for response and detailed instructions.

After uploading the files The CCS formats are working, Saving rules is working, but the logging is still not working. Think ill just leave it at this for now until the issue is actually solved.

Any chance there is any workaround for the time being? I cant view logs remotely in this state and im trying to trouble shoot a connection problem to Influxdb. Can TD-er's suggestion be implemented for now?

So does this need to be rebuilt in the custom build i received from @Ath?

Hey Ath, so everything is working great so far. All my sensor values are being read and with the rules to filter out the -1 values there is no issue. Now a few days ago when i pulled up the device via browser i noticed all the formatting on the webpage is off. I just flashed the last version on a br...

This GH Actions run should handle the unexpected 'Dew' inserted in the output, but you'll need to enable the Temperature to get both values. A proper fix will be included when I rewrite the plugin, as said earlier, couldn't include that in this quick fix. Dewpoint is now working. So all values exce...

Ahh good catch. Will test as soon as its done compiling and let you know. so far this will get the job done for my application. I have it hooked in and sending data to my HA system already. One observation is that every about minute all values default to -1.00. I'm assuming this is the equivalent of...

you did it! The temp and humidity readings are now showing up as values! Awesome work! :D Dew point and voltage readings are not showing up though. I believe the voltage reading can be removed completely from the values tab, however having it in there can be handy. As long as they show up Turning th...

I either missed those options (hard to believe) or somehow flashed the wrong version. I don't have the sensor with me now as I'm at work, but can run home and get it a bit later. I'll keep you updated.

Hold up, is'nt the temp and dew point options supposed to be enabled by the code?

I have never tried to issue a command via serial to the device. I assume this could be done through putty?

Just flashed the latest. Unfortunately there is no observable difference from the last version. The values are still showing up as -1. Logging still does read the humidity values. Thought this would have been the one :? Is there that much a difference between the other Atlus sensor to this one? I'm ...

Seems like you really know your stuff! Makes sense about that 300ms delay. I tried going through the source code to find anything but its way above my level. After not getting anywhere with espeasy I gave it a shot with Tasmota. They do have support for it, however, I also was not able to get any re...

With this new build i'm able to see humidity readings being logged in the log under P103. So there is communication now! The values column under devices still show -1 for all sensor readings. In the device config window, hitting submit a few times give the same error: Unable to send command to devic...

I'm working on this now. I have flashed the new build and have successfully added the sensor as a device. The device is, however, showing -1 readings for all channels. I do have 4.7k resistors hooked up on both data pins. https://ibb.co/5M44tct Here the I2C address is found by espeasy https://ibb.co...

This is amazing. Thanks for putting the time into this.
Looks like its going to take a while to compile. I'll start testing tomorrow and get back to you.

Yes! have two of these sensors hooked up to a Node MCU. I would REALLY appreciate the assistance with this! The EZO-Hum is still available and being sold and supported by atlas scientific.

I'll pm you in a day or two for some more details!

I was never able to get this working. My programing skills are too limited for this. Is there anyone out there that has the time and experience to take the lead on this.

Having a working system with a EZO-Hum on espeasy would be amazing.

Hey TD-er! thanks for the reply. So now im a bit curious about the isolation you mentioned. Can explain how to check for isolation a bit more in detail? I'm using Sonoff TH16's for the sensor readings. But will also be using a Sonoff SV in the future. So your saying if there continuity between GND (...

I'm just jumping into Espeasy now. Quite a bit to take on and figure out. I already have a few DS18B20 hooked up to sonoff's working great. I now want to include humidity. I'm interested in using the Atlas Scientific EZO-HUM sensor as it seems its the most waterproof humidity sensor out there (which...

Just double checking - you said “ Next you just grab your DS18b20 sensors and connect all grounds, vcc, and Data pins together. Everything is connected in series” but that sounds like parallel? I have the waterproof Sonoff sensors with jacks- would I still need the soldered wire or access through t...

No update from me as I have resigned to just needing the temperature readings for this project. I am interested that you have multiple Temp sensors on one TH16 and I wondered if you might point me to any info on how you've done that? Thanks Sure, its super easy: There are two versions of the TH16. ...

Hi,

any updates on this? I have have same problem. I keep getting "nan" values over and over.

Also, can this Si7021 sensor be run together with DS18b20's? I have another sonoff TH16 with multiple DS18b20 sensors running on it just great! Can I add a Si7021 on the same GPIO 14?

oay, problems solved!

I had and :1 in the code from the example with the door contact sensor

urn:upnp-org:serviceId:TemperatureSensor1:1&Variable=CurrentTemperature&Value

The correct version is:

urn:upnp-org:serviceId:TemperatureSensor1&Variable=CurrentTemperature&Value

Hi, i'm hoping to get some help with this. The temp value is not showing up on the dashboard. It does show up in the advanced section as a second "CurrentTemperature" Value. I noticed that from the sonoff rules section if i would change "CurrentTemperature" to "CurrentTemper...