Hello,

Many thanks for your help.
With the topic publish: all sensor values are transmitted.

Kind Regards
Juergen B.

Hello,

how can I transfer multiple sensor values (Temperature1, Temperatur2, Humidity, Pressure) ?
For one sensor value:
MQTT:
Controller Subscribe: %sysname%/#
Controller Publish: %sysname%/Temperature1

Kind Regards

Juergen B.

Hello,

Thank you for the information, I was able to flash the ESP32 with ESPEasy and connect it to my WLAN.

Kind Regards

Juergen B.

Hello,

I have a problem transferring the ESPEasy firmware to the ESP32 DEVKIT V1.
When flashing, I get an error message (see attached file).
Flash Tool: ESP Easy Flasher (0.04.007)
Firmware: ESP_Easy_mega_20210503_normal_ESP32_4M316K.bin
Board: ESP32 DEVKIT V1

Kind Regards

Juergen B.

Hi,
many thanks for the answer.
The MQTT transmission works.
The reference to the "wildcard topic #" was very helpful.
My MQTT Explorer: "MQTT.fx".
Note Correct is: Controller Publish:% sysname%/Temperature

Kind Regards

Juergen B.

Hello, I now want to send the temperature from the DS18B20 sensor via MQTT (Home Asistant (openHAB) MQTT). Info controller: Current Client ID: ESP_Easy_1_1 Controller Subscribe: %sysname%/Temperature Topic on the reception side: ESP_Easy_1_1/Temperatur MQTT Enable active. Device DS18B20: Send to Con...

Thanks, I'll test the "normal" one.

Kind Regards
Juergen B.

Hello,
I don't have the menu item "Notifications" for sending emails.
How can I activate this menu item or do I need a corresponding version of ESPEasy for it ?
Currently: ESP_Easy_mega_20210223_custom_ESP8266_4M1M.bin

Kind Regards
Juergen B.

Hello,
many thanks for the quick response.
Good thing I asked, because that (Assets) would not have occurred to me.

Kind Regards

Juergen B.

Hello,
where can I download ESPEasy 4MB (ESPEasy.....4M1M.bin) for ESP8266 NodeMCU ?

On Github I only find: ESPEasy_2step_UploaderMega_1024.bin.

Kind Regards

Juergen B.