If you have issues with the board, please try using a different USB cable, and/or connect it directly to an USB3 port on the PC (those can deliver higher current) No solution to the problem ... I connected a new Wemos to the same USB using the same cable without any problems. It is interesting that...

You can force flash mode by holding the "GPIO-0 button" pressed and shortly pressing the RST button while keeping the first one pressed. I flash the D1 directly via the USB port, where is the "GIPO 0" button? And if some flasher tool or serial monitor keeps the com port open, yo...

For the ESP's, like an ESP-01P ... ... I think I found my mistake: I don't have an ESP-01... I flashed the ... 1MB.bin file on my D1 mini. :roll: But now I have the new problem that this D1 is no longer recognized by the USB-Serial CH340 connection. Didn't he survive the flash action with the 1M bi...

Hello, another newbie question: I am using this firmware 20210223 and would like to update to the new version 20210503. Bild1.JPG If I click on "Firmware" under Tools Bild2.JPG I get this view in the browser. Bild3.JPG I can't do anything with that ... I would therefore now completely refl...

Hello, I am an absolute ESP Easy newbie and have implemented a DHT22 and OLED SSD1306 display on the ESP01 as the first project. I looked here in the forum, but the question is probably too simple ;) : -Which settings are necessary to continue using the DHT values via MQTT or similar in the IoBroker...