Let's Control It

sartam

right now you could build your own firmware using this branch: https://github.com/chromoxdor/ESPEasy/tree/esp_codemirror and copy the necessary files from /static (codemirror.min.js, codemirror.min.css, espeasy.min.js, anyword-hint.min.js ) to your esp (for now since the files need to be stored loc...

sartam

chromo23 wrote: ↑11 Jun 2022, 20:11 BTW the hint system not only uses words from the wordlist. it also analyses the inputfield...

It's great! How to use it? What files need to be installed and where to make it work?

sartam

At the moment only ascii characters are available, and in the default font also some special characters, but adding special characters, or even complete character sets, is a) quite hard to engineer, and b) takes a lot of space in the .bin files, so it won't be available in the regularly provided bu...

sartam

Another question. Are there fonts with Russian letters? If not, is it possible to make such a font?

sartam

TD-er wrote: ↑11 Jun 2022, 22:37 Thus it was not updated if you used one of the latest GitHub test builds.

Hooray! Earned!

sartam

TD-er wrote: ↑11 Jun 2022, 22:24 What exact filename is shown on the sysinfo page?
Just to make sure the flash was actually successful.

sartam

Ath wrote: ↑11 Jun 2022, 21:48 And please update using the serial update-route instead of OTA, then some updated settings and the latest Espressiff bootloader will be applied.

Hmm... This is the firmware I'm using. This is where the display doesn't work.

sartam

Ath wrote: ↑11 Jun 2022, 21:45 Still update to that Github build, or even this one https://github.com/letscontrolit/ESPEas ... 2481020833 that has the latest features and a bunch of extra fonts that could use some testing

Thank you. I'm going to try now.

sartam

Does this plugin/display need a PWM signal on a pin to dim the backlight? If so, then it is fixed in later (test) builds. I plan on making a new build this weekend, but you can already download one from the GitHubActions test builds (need an account on GitHub to download them) For example: https://...

sartam

Hi all. When updating ESP 32 firmware from March 28 to April 27, the ILI9341 display stops working. When flashing back to the firmware from March 28, the display starts working again. What could be the reason? I use the firmware with the label "display"

sartam

On the Internet, namely on aliexpress, I found the LD1115H sensor. Q: Does ESP Easy support this sensor?
https://hlktech.net/index.php?id=973&cateid=749

sartam

There is another way possible (not yet implemented in ESPEasy). The idea I'm having is to add support for EEPROM or similar storage systems. EEPROMs are available in I2C chips and allow for upto a million writes. There are also types which are interface compatible with EEPROMs, but allow for near i...

sartam

That is, the dummy values do not change after ESP EASY is turned off and on?

sartam

Often, information about the capabilities of the operation of slave devices on the I2C bus from 5 volts with a general power supply of the circuit from 3.3 volts often flashes before my eyes.

sartam

Hello. Is it possible to store the encoder value in non-volatile memory, so that after the power is turned off, the encoder, or variable, is assigned the same value as it was before the device was turned off?

sartam

Yes, of course I know about this feature. But, as they say, you can't argue with facts. Also, an LSD 2004 display is connected to 5 volts, and it works fine.

sartam

It is working! The only remark. I connected the microcircuit to 5 volts. Although the datasheet says that the power is in the range of 2.8-5.2 volts

sartam

An interesting thing. I'll try, of course. I'm not using a module, but just a microcircuit in a dip package. But this should not be an obstacle. I will definitely try.

sartam

Does not work. I do not understand why. Went through all available pcf8574 addresses...

sartam

chromo23 wrote: ↑02 May 2022, 18:03 for me only another address seems to work. i would start with that...

Port address, or pcf8574 address?

sartam

chromo23 wrote: ↑02 May 2022, 17:18

have you tried another port and/or another address?

Now I will try another port, although I already did it.

sartam

I use the command pcfgpio,65,1. Address pcf8574 0x38
chromo23, What address are you using?

sartam

Hello. In the last release of March 2022, did something change in the work of PCF8574? I do exactly as it says here, the LED connected to port 0 does not respond. Everything is connected according to the diagram above. Firmware mega20220328_normal_ESP8266_4M1M

sartam

Thank you. As I did not guess ... It's elementary.

sartam

How and when will displays learn their names 1 and 2? When configuring the LED, it is not possible to assign a name.

sartam

Indexes 1 and 2 are tied to device numbers on the Devices tab?

sartam

Hello. I am trying to connect 2 displays with 4 digits on TM1637 each to their DIO and CLK pins. Can these displays be controlled individually?

sartam

Is 8266 installed in sonoff? Maybe 8255?

sartam

@igrad, share the link, please.

sartam

Hello. If you do not find a suitable solution on the Internet, then in general this is a simple task for self-implementation. Provided that you are familiar with electronic circuits

sartam

I got an interesting effect when I applied PWM,14,100 to the servo's input. the servo started to rotate continuously

sartam

ESP_Easy_mega_20211224_display_ESP8266_4M1M Dec 24 2021
I give the command servo,1,12,-45 from the rules, from the command line

sartam

Hello. I tried to use the instructions here, but got the answer "failed". What has changed when working with a servo?

sartam

A... That is, you need to compile the file yourself, or wait for the official release...

sartam

Hello. What am I doing wrong? I found a new release on github, downloaded it. But there are no binaries there. can i see the download link for the new release?

sartam · Re: PCB ESP Easy TD-er wrote: ↑04 Apr 2022, 19:16 Looks nice I did my best.

TD-er wrote: ↑04 Apr 2022, 19:16 Looks nice

I did my best.

sartam

Maybe a respected TD-er, if he suddenly has time, and he will devote it to us and write EEPROM support?

sartam

No. Not yet. I am not so strong in programming to create a plug-in for a memory chip

. It's just that the board can be used not only for ESP Easy firmware, but also for other projects.

sartam

Hi all. not so long ago I became interested in the ESP Easy firmware. And after some thought and testing the firmware on the modules, I came to the decision to make a printed circuit board for the ESP processor. Under a certain body, with some more goodies. The result was a project implemented in th...

sartam

Hello, I'm from Russia, the city of Perm. I recently discovered the Esp_easy platform and found it to be a pretty good fit for my projects. I have designed a PCB for Esp_easy on esp8266 and I want to share with the community. The project is an open source. How and where can I create a topic with a d...

Search found 40 matches