Search found 96 matches

by asm7100
28 Mar 2016, 09:56
Forum: ESP Easy: Hardware
Topic: connecting normally closed switch to an ESP-01
Replies: 3
Views: 2268

Re: connecting normally closed switch to an ESP-01

One RES to the input and the other end of the RES to GND, then one site of the switch to the RES(Input) and the other to 3V3.
by asm7100
28 Feb 2016, 11:48
Forum: ESP Easy: General Discussion
Topic: Max dallas
Replies: 3
Views: 3420

Re: Max dallas

What dallas is it?
If its a 1-Wire then use google to find out how to connect more.
by asm7100
28 Feb 2016, 08:13
Forum: ESP Easy: Hardware
Topic: Gotmy w25q32 today :-)
Replies: 4
Views: 2071

Re: Gotmy w25q32 today :-)

Only need more space not more pins :-)
by asm7100
26 Feb 2016, 20:26
Forum: ESP Easy: Hardware
Topic: Gotmy w25q32 today :-)
Replies: 4
Views: 2071

Re: Gotmy w25q32 today :-)

No just want to upgrade the EEProm to 4MByte :-)
by asm7100
26 Feb 2016, 17:49
Forum: ESP Easy: Hardware
Topic: Gotmy w25q32 today :-)
Replies: 4
Views: 2071

Gotmy w25q32 today :-)

In this weekend i will see if I can replace a 1MByte eeprom with a 4MByte eeprom.
by asm7100
21 Feb 2016, 11:14
Forum: ESP Easy: Projects / Applications
Topic: Wiki update
Replies: 1
Views: 1106

Re: Wiki update

Grate work
by asm7100
21 Feb 2016, 10:59
Forum: ESP Easy: Projects / Applications
Topic: [Retired] MiniESPEasy = ESPEasy for modules with limited I/O pins.
Replies: 16
Views: 10551

Re: MiniESPEasy = ESPEasy for modules with limited I/O pins.

How about just using i2c devices like MCP23017 (2x8 I/o) and mcp3428 (4 channels adc 18 Bit) Only 2 pin to use.
Also i2c O_led display and so on.
by asm7100
10 Feb 2016, 07:41
Forum: ESP Easy: Software
Topic: How to clear the settings in R78
Replies: 4
Views: 1740

Re: How to clear the settings in R78

Thanks.
How about writing the wiki about the things you can do with a serial connection?
by asm7100
09 Feb 2016, 14:20
Forum: ESP Easy: Software
Topic: How to clear the settings in R78
Replies: 4
Views: 1740

How to clear the settings in R78

Hi iam running a r78, but i set a roung IP address, hot to clear it.
If i upload the r78 again its just use the old setting

Its a Black esp 01 module.
by asm7100
09 Feb 2016, 09:53
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Ohh yes lots of time.
If i Flash it with R39 its works (From arduino)
But not if i flash it with r78.
I Will look more into it today. Used 4 houres in the night :-(
by asm7100
09 Feb 2016, 03:02
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Sorry to say i have used the new flash util,and i can not se any ESP_0 as a access point????
What Baud to connect to the ESP modul?
by asm7100
07 Jan 2016, 21:36
Forum: ESP Easy: Hardware
Topic: PCB Idea's...
Replies: 57
Views: 18639

Re: PCB Idea's...

And the diagram.
esptcp22com_sch.png
esptcp22com_sch.png (21 KiB) Viewed 6016 times
I have had made 10 pices of this and thay works
by asm7100
07 Jan 2016, 21:34
Forum: ESP Easy: Hardware
Topic: PCB Idea's...
Replies: 57
Views: 18639

Re: PCB Idea's...

I have made this one for esp01.
esptcp22com_pcb.png
esptcp22com_pcb.png (8.28 KiB) Viewed 6016 times
by asm7100
06 Dec 2015, 08:47
Forum: ESP Easy: Software
Topic: Static IP address,subnet,gateway in code (request)
Replies: 3
Views: 1619

Re: Static IP address,subnet,gateway in code (request)

Like that to, I all ways scan the code,and put it in my self before upload.
by asm7100
01 Dec 2015, 17:16
Forum: ESP Easy: General Discussion
Topic: SPI support
Replies: 4
Views: 1800

Re: SPI support

I Think they do, i have it running on a Arduino Nano with SPI right now, but maby I just bye a I2C one :-)
by asm7100
29 Nov 2015, 19:47
Forum: ESP Easy: Software
Topic: watchdog ???
Replies: 2
Views: 1094

Re: watchdog ???

In witch version is that, i have to modules that loos connection to Domoticz
by asm7100
29 Nov 2015, 12:33
Forum: ESP Easy: Software
Topic: watchdog ???
Replies: 2
Views: 1094

watchdog ???

Hi
My ESP-12 modules misses the connection to my Domoticz server, and i need to turn i off/on.
Is it possible to make a watchdog into the software, so its reboot.
by asm7100
29 Nov 2015, 01:03
Forum: ESP Easy: General Discussion
Topic: SPI support
Replies: 4
Views: 1800

SPI support

Is it possible to mak spi support, for OLCD? OLED?
by asm7100
31 Oct 2015, 10:28
Forum: ESP Easy: Software
Topic: Discussion on local control by ESP Easy
Replies: 29
Views: 12260

Re: Discussion on local control by ESP Easy

I Have a test set-up to, and mine also frees up some time :-(
by asm7100
28 Oct 2015, 12:43
Forum: ESP Easy: Hardware
Topic: 433 MHz Transmitter & Receiver
Replies: 11
Views: 21808

Re: 433 MHz Transmitter & Receiver

aaah ok :-) nice
by asm7100
24 Oct 2015, 06:43
Forum: ESP Easy: Hardware
Topic: 433 MHz Transmitter & Receiver
Replies: 11
Views: 21808

Re: 433 MHz Transmitter & Receiver

Sorry to ask, what the point?
Don't speeak german.
And the Wifi modul ja has Wifi?
by asm7100
23 Oct 2015, 01:00
Forum: ESP Easy: General Discussion
Topic: Static IP config
Replies: 7
Views: 4054

Re: Static IP config

If you use DHCP, then you can use the MAC add to set a static IP Add :-)
by asm7100
21 Oct 2015, 09:14
Forum: Introduce yourself
Topic: From Somerset UK
Replies: 2
Views: 1046

Re: From Somerset UK

I'am on first name with my postman :-)
by asm7100
19 Oct 2015, 22:12
Forum: ESP Easy: Hardware
Topic: reed relais
Replies: 24
Views: 6190

Re: reed relais

Hi Bert, I have a couple of those ULNxxx laying around. They came with the cheap servo's. If i connect the "right" side to 12v, the left to 3.3v, i can trigger my doorlock using this simple chip? Is 3.3v enough to open the "gate"? Interrusting, no need for level shifting on the outgoing side then? ...
by asm7100
19 Oct 2015, 22:12
Forum: ESP Easy: Hardware
Topic: reed relais
Replies: 24
Views: 6190

Re: reed relais

If you connect a mcp23017 then you have 2x8 In/out more and only use 2 pins on the esp modul, it will say you can have 2x8 in/out on a esp-01 modul, and the MCP23017 has 3 address pins so you can have 8x (2x8) in/out port on a esp modul and only use 2 pins (the I2C bus)

Just a little info :-)
by asm7100
19 Oct 2015, 16:39
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

To make it compile you need to download https://github.com/markszabo/IRremoteESP8266
and install it in you lib dir.
by asm7100
19 Oct 2015, 16:33
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Get this error when i try to compile the r39 version. Arduino: 1.6.5 (Windows 8.1), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, 115200" Using library ESP8266WiFi in folder: C:\Users\Allan\AppData\Roaming\Arduino15\packages\esp8266\hardware\esp8266\1.6.5-947-g39819f0\libraries\ESP8266WiFi Using lib...
by asm7100
19 Oct 2015, 14:19
Forum: ESP Easy: Hardware
Topic: reed relais
Replies: 24
Views: 6190

Re: reed relais

Just made this quick. Nice picture, but please keep in mind that the collector of a npn transistor needs a positive voltage with respect to the emitter to work. Also keep in mind that some remotes scan their buttons. What chip is being used in the remote? Yes you are right, i just uses something li...
by asm7100
19 Oct 2015, 14:14
Forum: ESP Easy: Software
Topic: ESPEasy R020
Replies: 1
Views: 861

Re: ESPEasy R020

by asm7100
17 Oct 2015, 18:13
Forum: ESP Easy: Hardware
Topic: Reboot???
Replies: 0
Views: 902

Reboot???

Just fonny, my esp-12 has run for days now, but then it rebooted??? 218 : INIT : Booting Build nr:37 383 : WIFI : Connecting... 4491 : IP : Static IP :192.168.0.121 4492 : INIT : I2C 5568 : INIT : Boot OK 5568 : INIT : Normal boot 35576 : WD : Uptime 0 ConnectFailures 0 FreeMem 16392 36398 : DS : Te...
by asm7100
16 Oct 2015, 18:22
Forum: ESP Easy: General Discussion
Topic: More Esp-12 Flashing problems
Replies: 102
Views: 42865

Re: More Esp-12 Flashing problems

Just hold GPIO0 to gnd when it boot up, and then its in flash mode.
by asm7100
15 Oct 2015, 11:36
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Backbone right :-)

And yes keep op the good work. :-)
by asm7100
14 Oct 2015, 22:34
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Just thinking a little her a little there.
Its only a modul to setup, then it will run in its on little world.
No need for fancy interface, just something basic to do the setup. Thats what i think.
How moutch does it take of memory to make it use customer ccs? Upload and so on.
by asm7100
13 Oct 2015, 20:20
Forum: ESP Easy: Software
Topic: Need a Build R20 With all
Replies: 6
Views: 2000

Re: Need a Build R20 With all

how about DS18B20 showing minus degrees?
More than one DS18B20 how does that work. ?

But now R39 works.
by asm7100
13 Oct 2015, 19:42
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

How about delete the Node List, that must free up something :-)

And how about the Unit #, is the Name not enough?
by asm7100
13 Oct 2015, 19:40
Forum: ESP Easy: General Discussion
Topic: How to use the Node List?
Replies: 2
Views: 1214

Re: How to use the Node List?

Ok, maby that can free op some memory to the future :-)
by asm7100
13 Oct 2015, 13:23
Forum: ESP Easy: Software
Topic: Error with Switch input
Replies: 1
Views: 925

Error with Switch input

It's seems like some problems with Switch input.

I connectet one to Gnd and the other to gpio16 when the wire break the door is open.
It's market as Pull UP.
and Switch Button Type: Push Button Active low.

Bout it dosen's seem to work.
by asm7100
13 Oct 2015, 12:21
Forum: ESP Easy: General Discussion
Topic: How to use the Node List?
Replies: 2
Views: 1214

How to use the Node List?

Who dos the Node list works?
by asm7100
13 Oct 2015, 12:04
Forum: ESP Easy: General Discussion
Topic: ESP-01 with a bigger flash.
Replies: 0
Views: 904

ESP-01 with a bigger flash.

I have just ordert som W25Q32 (32Mbit) - 4MByte eeproms
On ESP-01 there is a W25Q40 (4Mbit) - 512KByte eeproms

And when i get them, i will try to replas the W25Q40 with a W25Q32 eeprom. :-)
by asm7100
13 Oct 2015, 10:53
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Yes now it works.

Is there a way to check witch ESP (Flash size) you got?
by asm7100
12 Oct 2015, 23:16
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

I now also have tryde to compile with NodeMCU 0.9 and with NodeMCU 1.0 Still the same.
by asm7100
12 Oct 2015, 23:07
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Now i have flash it with R20 and its all works.
Even the setup is still in the memory of the ESP12 modul, from the R20 at first.
by asm7100
12 Oct 2015, 23:01
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Tryed to flash the esp-12 again with R37.
first I get this
ets Jan 8 2013,rst cause:4, boot mode:(1,6)

wdt reset

After power off / on

I get garbis.
by asm7100
12 Oct 2015, 22:57
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Now i have flash with R37 and gets garbis output
by asm7100
12 Oct 2015, 22:50
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

Now i have used e to erase the flash.

Code: Select all

Press 's' to show flash area
Press 'e' to erase flash area
FLASH: Erase Sector: 256

 ets Jan  8 2013,rst cause:4, boot mode:(3,6)

wdt reset
ets_main.c 
by asm7100
12 Oct 2015, 22:45
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114959

Re: ESP Easy Releases

This is after R20 and just uploadet The program to the flash and Pressed S. New format settings found: SSID : VV WPA : iE-B fk!<(R ~g PID : 1073873385 Version : 1074852416 Old format settings found: SSID : e@5 WPA : @ PID : 1178625426 Version : 549519249 Sector dump: Offset: 0 : @@@ Offset: 1 : )O,)...
by asm7100
12 Oct 2015, 21:23
Forum: ESP Easy: Software
Topic: Need a Build R20 With all
Replies: 6
Views: 2000

Re: Need a Build R20 With all

Yes I know, but the newest one is from 2015-09-13. :-) And even that has a lot of bugs.