Search found 96 matches
- 28 Mar 2016, 09:56
- Forum: ESP Easy: Hardware
- Topic: connecting normally closed switch to an ESP-01
- Replies: 3
- Views: 4885
Re: connecting normally closed switch to an ESP-01
One RES to the input and the other end of the RES to GND, then one site of the switch to the RES(Input) and the other to 3V3.
- 28 Feb 2016, 11:48
- Forum: ESP Easy: General Discussion
- Topic: Max dallas
- Replies: 3
- Views: 6150
Re: Max dallas
What dallas is it?
If its a 1-Wire then use google to find out how to connect more.
If its a 1-Wire then use google to find out how to connect more.
- 28 Feb 2016, 08:13
- Forum: ESP Easy: Hardware
- Topic: Gotmy w25q32 today :-)
- Replies: 4
- Views: 5030
Re: Gotmy w25q32 today :-)
Only need more space not more pins
- 26 Feb 2016, 20:26
- Forum: ESP Easy: Hardware
- Topic: Gotmy w25q32 today :-)
- Replies: 4
- Views: 5030
Re: Gotmy w25q32 today :-)
No just want to upgrade the EEProm to 4MByte
- 26 Feb 2016, 17:49
- Forum: ESP Easy: Hardware
- Topic: Gotmy w25q32 today :-)
- Replies: 4
- Views: 5030
Gotmy w25q32 today :-)
In this weekend i will see if I can replace a 1MByte eeprom with a 4MByte eeprom.
- 22 Feb 2016, 21:40
- Forum: ESP Easy: Projects / Applications
- Topic: [Retired] MiniESPEasy = ESPEasy for modules with limited I/O pins.
- Replies: 16
- Views: 20522
- 21 Feb 2016, 11:14
- Forum: ESP Easy: Projects / Applications
- Topic: Wiki update
- Replies: 1
- Views: 2870
Re: Wiki update
Grate work
- 21 Feb 2016, 10:59
- Forum: ESP Easy: Projects / Applications
- Topic: [Retired] MiniESPEasy = ESPEasy for modules with limited I/O pins.
- Replies: 16
- Views: 20522
Re: MiniESPEasy = ESPEasy for modules with limited I/O pins.
How about just using i2c devices like MCP23017 (2x8 I/o) and mcp3428 (4 channels adc 18 Bit) Only 2 pin to use.
Also i2c O_led display and so on.
Also i2c O_led display and so on.
- 10 Feb 2016, 07:41
- Forum: ESP Easy: Software
- Topic: How to clear the settings in R78
- Replies: 4
- Views: 4399
Re: How to clear the settings in R78
Thanks.
How about writing the wiki about the things you can do with a serial connection?
How about writing the wiki about the things you can do with a serial connection?
- 09 Feb 2016, 14:20
- Forum: ESP Easy: Software
- Topic: How to clear the settings in R78
- Replies: 4
- Views: 4399
How to clear the settings in R78
Hi iam running a r78, but i set a roung IP address, hot to clear it.
If i upload the r78 again its just use the old setting
Its a Black esp 01 module.
If i upload the r78 again its just use the old setting
Its a Black esp 01 module.
- 09 Feb 2016, 09:53
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Ohh yes lots of time.
If i Flash it with R39 its works (From arduino)
But not if i flash it with r78.
I Will look more into it today. Used 4 houres in the night
If i Flash it with R39 its works (From arduino)
But not if i flash it with r78.
I Will look more into it today. Used 4 houres in the night
- 09 Feb 2016, 03:02
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Sorry to say i have used the new flash util,and i can not se any ESP_0 as a access point????
What Baud to connect to the ESP modul?
What Baud to connect to the ESP modul?
- 07 Jan 2016, 21:36
- Forum: ESP Easy: Hardware
- Topic: PCB Idea's...
- Replies: 57
- Views: 45480
Re: PCB Idea's...
And the diagram.
I have had made 10 pices of this and thay works- 07 Jan 2016, 21:34
- Forum: ESP Easy: Hardware
- Topic: PCB Idea's...
- Replies: 57
- Views: 45480
Re: PCB Idea's...
I have made this one for esp01.
- 06 Dec 2015, 08:47
- Forum: ESP Easy: Software
- Topic: Static IP address,subnet,gateway in code (request)
- Replies: 3
- Views: 4426
Re: Static IP address,subnet,gateway in code (request)
Like that to, I all ways scan the code,and put it in my self before upload.
- 01 Dec 2015, 17:16
- Forum: ESP Easy: General Discussion
- Topic: SPI support
- Replies: 4
- Views: 4704
Re: SPI support
I Think they do, i have it running on a Arduino Nano with SPI right now, but maby I just bye a I2C one
- 01 Dec 2015, 00:26
- Forum: ESP Easy: General Discussion
- Topic: SPI support
- Replies: 4
- Views: 4704
- 29 Nov 2015, 19:47
- Forum: ESP Easy: Software
- Topic: watchdog ???
- Replies: 2
- Views: 2863
Re: watchdog ???
In witch version is that, i have to modules that loos connection to Domoticz
- 29 Nov 2015, 12:33
- Forum: ESP Easy: Software
- Topic: watchdog ???
- Replies: 2
- Views: 2863
watchdog ???
Hi
My ESP-12 modules misses the connection to my Domoticz server, and i need to turn i off/on.
Is it possible to make a watchdog into the software, so its reboot.
My ESP-12 modules misses the connection to my Domoticz server, and i need to turn i off/on.
Is it possible to make a watchdog into the software, so its reboot.
- 29 Nov 2015, 01:03
- Forum: ESP Easy: General Discussion
- Topic: SPI support
- Replies: 4
- Views: 4704
SPI support
Is it possible to mak spi support, for OLCD? OLED?
- 31 Oct 2015, 10:28
- Forum: ESP Easy: Software
- Topic: Discussion on local control by ESP Easy
- Replies: 29
- Views: 25062
Re: Discussion on local control by ESP Easy
I Have a test set-up to, and mine also frees up some time
- 28 Oct 2015, 12:43
- Forum: ESP Easy: Hardware
- Topic: 433 MHz Transmitter & Receiver
- Replies: 11
- Views: 29576
Re: 433 MHz Transmitter & Receiver
aaah ok nice
- 24 Oct 2015, 06:43
- Forum: ESP Easy: Hardware
- Topic: 433 MHz Transmitter & Receiver
- Replies: 11
- Views: 29576
Re: 433 MHz Transmitter & Receiver
Sorry to ask, what the point?
Don't speeak german.
And the Wifi modul ja has Wifi?
Don't speeak german.
And the Wifi modul ja has Wifi?
- 23 Oct 2015, 01:00
- Forum: ESP Easy: General Discussion
- Topic: Static IP config
- Replies: 7
- Views: 8656
Re: Static IP config
If you use DHCP, then you can use the MAC add to set a static IP Add
- 21 Oct 2015, 09:14
- Forum: Introduce yourself
- Topic: From Somerset UK
- Replies: 2
- Views: 3254
Re: From Somerset UK
I'am on first name with my postman
- 19 Oct 2015, 22:12
- Forum: ESP Easy: Hardware
- Topic: reed relais
- Replies: 24
- Views: 16518
Re: reed relais
Hi Bert, I have a couple of those ULNxxx laying around. They came with the cheap servo's. If i connect the "right" side to 12v, the left to 3.3v, i can trigger my doorlock using this simple chip? Is 3.3v enough to open the "gate"? Interrusting, no need for level shifting on the ...
- 19 Oct 2015, 22:12
- Forum: ESP Easy: Hardware
- Topic: reed relais
- Replies: 24
- Views: 16518
Re: reed relais
If you connect a mcp23017 then you have 2x8 In/out more and only use 2 pins on the esp modul, it will say you can have 2x8 in/out on a esp-01 modul, and the MCP23017 has 3 address pins so you can have 8x (2x8) in/out port on a esp modul and only use 2 pins (the I2C bus)
Just a little info
Just a little info
- 19 Oct 2015, 16:39
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
To make it compile you need to download https://github.com/markszabo/IRremoteESP8266
and install it in you lib dir.
and install it in you lib dir.
- 19 Oct 2015, 16:33
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Get this error when i try to compile the r39 version. Arduino: 1.6.5 (Windows 8.1), Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, 115200" Using library ESP8266WiFi in folder: C:\Users\Allan\AppData\Roaming\Arduino15\packages\esp8266\hardware\esp8266\1.6.5-947-g39819f0\libraries\ESP8266WiFi...
- 19 Oct 2015, 14:19
- Forum: ESP Easy: Hardware
- Topic: reed relais
- Replies: 24
- Views: 16518
Re: reed relais
Just made this quick. Nice picture, but please keep in mind that the collector of a npn transistor needs a positive voltage with respect to the emitter to work. Also keep in mind that some remotes scan their buttons. What chip is being used in the remote? Yes you are right, i just uses something li...
- 19 Oct 2015, 14:14
- Forum: ESP Easy: Software
- Topic: ESPEasy R020
- Replies: 1
- Views: 2849
Re: ESPEasy R020
Here its R39
https://github.com/ESP8266nu
https://github.com/ESP8266nu
- 17 Oct 2015, 18:13
- Forum: ESP Easy: Hardware
- Topic: Reboot???
- Replies: 0
- Views: 2498
Reboot???
Just fonny, my esp-12 has run for days now, but then it rebooted??? 218 : INIT : Booting Build nr:37 383 : WIFI : Connecting... 4491 : IP : Static IP :192.168.0.121 4492 : INIT : I2C 5568 : INIT : Boot OK 5568 : INIT : Normal boot 35576 : WD : Uptime 0 ConnectFailures 0 FreeMem 16392 36398 : DS : Te...
- 16 Oct 2015, 18:22
- Forum: ESP Easy: General Discussion
- Topic: More Esp-12 Flashing problems
- Replies: 102
- Views: 90063
Re: More Esp-12 Flashing problems
Just hold GPIO0 to gnd when it boot up, and then its in flash mode.
- 15 Oct 2015, 11:36
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Backbone right
And yes keep op the good work.
And yes keep op the good work.
- 14 Oct 2015, 22:34
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Just thinking a little her a little there.
Its only a modul to setup, then it will run in its on little world.
No need for fancy interface, just something basic to do the setup. Thats what i think.
How moutch does it take of memory to make it use customer ccs? Upload and so on.
Its only a modul to setup, then it will run in its on little world.
No need for fancy interface, just something basic to do the setup. Thats what i think.
How moutch does it take of memory to make it use customer ccs? Upload and so on.
- 13 Oct 2015, 21:35
- Forum: ESP Easy: General Discussion
- Topic: More Esp-12 Flashing problems
- Replies: 102
- Views: 90063
- 13 Oct 2015, 20:20
- Forum: ESP Easy: Software
- Topic: Need a Build R20 With all
- Replies: 6
- Views: 5794
Re: Need a Build R20 With all
how about DS18B20 showing minus degrees?
More than one DS18B20 how does that work. ?
But now R39 works.
More than one DS18B20 how does that work. ?
But now R39 works.
- 13 Oct 2015, 19:42
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
How about delete the Node List, that must free up something
And how about the Unit #, is the Name not enough?
And how about the Unit #, is the Name not enough?
- 13 Oct 2015, 19:40
- Forum: ESP Easy: General Discussion
- Topic: How to use the Node List?
- Replies: 2
- Views: 3162
Re: How to use the Node List?
Ok, maby that can free op some memory to the future
- 13 Oct 2015, 13:23
- Forum: ESP Easy: Software
- Topic: Error with Switch input
- Replies: 1
- Views: 2426
Error with Switch input
It's seems like some problems with Switch input.
I connectet one to Gnd and the other to gpio16 when the wire break the door is open.
It's market as Pull UP.
and Switch Button Type: Push Button Active low.
Bout it dosen's seem to work.
I connectet one to Gnd and the other to gpio16 when the wire break the door is open.
It's market as Pull UP.
and Switch Button Type: Push Button Active low.
Bout it dosen's seem to work.
- 13 Oct 2015, 12:21
- Forum: ESP Easy: General Discussion
- Topic: How to use the Node List?
- Replies: 2
- Views: 3162
How to use the Node List?
Who dos the Node list works?
- 13 Oct 2015, 12:04
- Forum: ESP Easy: General Discussion
- Topic: ESP-01 with a bigger flash.
- Replies: 0
- Views: 2719
ESP-01 with a bigger flash.
I have just ordert som W25Q32 (32Mbit) - 4MByte eeproms
On ESP-01 there is a W25Q40 (4Mbit) - 512KByte eeproms
And when i get them, i will try to replas the W25Q40 with a W25Q32 eeprom.
On ESP-01 there is a W25Q40 (4Mbit) - 512KByte eeproms
And when i get them, i will try to replas the W25Q40 with a W25Q32 eeprom.
- 13 Oct 2015, 10:53
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Yes now it works.
Is there a way to check witch ESP (Flash size) you got?
Is there a way to check witch ESP (Flash size) you got?
- 12 Oct 2015, 23:16
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
I now also have tryde to compile with NodeMCU 0.9 and with NodeMCU 1.0 Still the same.
- 12 Oct 2015, 23:07
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Now i have flash it with R20 and its all works.
Even the setup is still in the memory of the ESP12 modul, from the R20 at first.
Even the setup is still in the memory of the ESP12 modul, from the R20 at first.
- 12 Oct 2015, 23:01
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Tryed to flash the esp-12 again with R37.
first I get this
ets Jan 8 2013,rst cause:4, boot mode:(1,6)
wdt reset
After power off / on
I get garbis.
first I get this
ets Jan 8 2013,rst cause:4, boot mode:(1,6)
wdt reset
After power off / on
I get garbis.
- 12 Oct 2015, 22:57
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Now i have flash with R37 and gets garbis output
- 12 Oct 2015, 22:50
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
Now i have used e to erase the flash.
Code: Select all
Press 's' to show flash area
Press 'e' to erase flash area
FLASH: Erase Sector: 256
ets Jan 8 2013,rst cause:4, boot mode:(3,6)
wdt reset
ets_main.c
- 12 Oct 2015, 22:45
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 294356
Re: ESP Easy Releases
This is after R20 and just uploadet The program to the flash and Pressed S. New format settings found: SSID : VV WPA : iE-B fk!<(R ~g PID : 1073873385 Version : 1074852416 Old format settings found: SSID : e@5 WPA : @ PID : 1178625426 Version : 549519249 Sector dump: Offset: 0 : @@@ Offset: 1 : )O,)...
- 12 Oct 2015, 21:23
- Forum: ESP Easy: Software
- Topic: Need a Build R20 With all
- Replies: 6
- Views: 5794
Re: Need a Build R20 With all
Yes I know, but the newest one is from 2015-09-13. And even that has a lot of bugs.