Search found 585 matches

by Stuntteam
03 Jun 2019, 17:36
Forum: RFlink: General Discussions
Topic: R45 - 433MHZ Send Doesn't Work Anymore
Replies: 5
Views: 1144

Re: R45 - 433MHZ Send Doesn't Work Anymore

It was a specific issue back in 2017 with a very old release.
This is no longer relevant for the current release version.
by Stuntteam
30 May 2019, 10:13
Forum: RFlink: General Discussions
Topic: development stuck/still alive?
Replies: 4
Views: 1389

Re: development stuck/still alive?

>no answers from forum no answers from email no answers to help ... You send at least 4 messages about an elepowstar doorbel... and not all of them that friendly. You even received an answer that we are looking into it. >it s very unfair from the man/group who initiated this project to to drop those...
by Stuntteam
20 May 2019, 14:37
Forum: RFlink: General Discussions
Topic: Problem with keypress ever 1 sec
Replies: 2
Views: 84

Re: Problem with keypress ever 1 sec

Nothing.
Pressing a button just shortly or pressing it very long does not generate a different signal.
This means RFlink does not need to repeat the same signal over and over.
All works as expected.

What do you believe is wrong then?
by Stuntteam
16 May 2019, 15:13
Forum: RFLink: Unsupported devices
Topic: FirePlace Jolly Mec
Replies: 5
Views: 738

Re: FirePlace Jolly Mec

Do you always get the same 2 lines of data when pressing a button?
Can you post these 2 lines for the 2 main buttons (like on/off)
by Stuntteam
13 May 2019, 10:05
Forum: RFlink: General Discussions
Topic: More than 16 RTS remotes
Replies: 3
Views: 196

Re: More than 16 RTS remotes

The next release has support for 32.
by Stuntteam
29 Mar 2019, 16:03
Forum: RFlink: General Discussions
Topic: So many questions and no answers ? the forum is dead or not ?
Replies: 3
Views: 475

Re: So many questions and no answers ? the forum is dead or not ?

Most answers can be found here: http://www.rflink.nl/blog2/faq or in your case here : http://www.rflink.nl/blog2/devlist You asked questions about products (doorbell) that are not in the supported device list. Guess what, if they are not listed as being supported and are not working when you try the...
by Stuntteam
26 Feb 2019, 00:13
Forum: RFLink: Hardware Related discussions
Topic: Rflinkloader fault
Replies: 2
Views: 193

Re: Rflinkloader fault

are you sure all files from the archive are copied?
by Stuntteam
14 Feb 2019, 14:31
Forum: RFLink: Development and announcements
Topic: Send custom packet
Replies: 7
Views: 2461

Re: Send custom packet

No, we do not have fully custom packets. We only have the rffind feature for now.
by Stuntteam
14 Feb 2019, 14:29
Forum: RFLink: Development and announcements
Topic: Sending keeloq packets
Replies: 2
Views: 390

Re: Sending keeloq packets

The button identification is not encoded, thats why RFLink can see it.
However, the Rolling Code is encoded, thats why RFlink can not send with this protocol.
It would required a decryption key to decode the rolling code. This key is different for every device.
by Stuntteam
26 Jan 2019, 13:44
Forum: RFLink: Nederlands support forum
Topic: Smanos x500 domoticz
Replies: 3
Views: 293

Re: Smanos x500 domoticz

Hier staat wat je moet doen als devices niet worden weergegeven:
http://www.rflink.nl/blog2/development
by Stuntteam
17 Jan 2019, 12:19
Forum: RFLink: Hardware Related discussions
Topic: Selectplus doorbell issue
Replies: 2
Views: 239

Re: Selectplus doorbell issue

We are working on a fix for that..
by Stuntteam
13 Jan 2019, 14:58
Forum: RFlink: General Discussions
Topic: Temp / Hygro F007TH troubles
Replies: 5
Views: 541

Re: Temp / Hygro F007TH troubles

RFlink does not transmit F007 or any other weather station signals.. it only receives..! If you want to try a RX/TX module that is untested/unlisted then you should probably also get one of the listed modules for reference.. like the rbx6 or so. Make sure devices are not too far away when testing bu...
by Stuntteam
08 Jan 2019, 19:51
Forum: RFlink: General Discussions
Topic: How to change direction of Somfy roller shutters
Replies: 2
Views: 290

Re: How to change direction of Somfy roller shutters

Isnt that something you can easily change in Domoticz?
by Stuntteam
04 Jan 2019, 16:44
Forum: RFlink: General Discussions
Topic: RFLink Mini GPIO and domoticz
Replies: 4
Views: 429

Re: RFLink Mini GPIO and domoticz

Yeah, the first one is double.. but you are right..
by Stuntteam
04 Jan 2019, 10:16
Forum: RFlink: General Discussions
Topic: RFLink Mini GPIO and domoticz
Replies: 4
Views: 429

Re: RFLink Mini GPIO and domoticz

Go to the hardware tab, use the create manual device button listed behind rflink and add the device.. Here you enter a line that would normally show up in a rflink log like for example 20;04;TriState;ID=86a8aa;SWITCH=1;CMD=ON; Thus your 10;GPIOset;31;0;ON; needs to be converted to: 20;00;GPIOset;ID=...
by Stuntteam
14 Dec 2018, 15:11
Forum: RFLink: Unsupported devices
Topic: Kerui D026 inconsistently decoded
Replies: 18
Views: 6109

Re: Kerui D026 inconsistently decoded

That is one of the reasons why we are taking time to rewrite and redo the code
by Stuntteam
02 Dec 2018, 12:49
Forum: RFlink: General Discussions
Topic: Can't control Telldus Ip44 swtich
Replies: 3
Views: 352

Re: Can't control Telldus Ip44 swtich

It would help if someone with a remote could make a log..
by Stuntteam
28 Nov 2018, 09:42
Forum: RFLink: Nederlands support forum
Topic: Brennenstuhl Comfort-Line 1507050 draadloze schakelaars
Replies: 2
Views: 590

Re: Brennenstuhl Comfort-Line 1507050 draadloze schakelaars

Klopt, er is geen zend functie aanwezig in de pluggen..
dus druk je de knop dan kan er nooit terugmelding zijn naar rflink/domoticz enz.
by Stuntteam
25 Nov 2018, 20:00
Forum: RFLink: Development and announcements
Topic: RFLink-ESP
Replies: 2
Views: 1189

Re: RFLink-ESP

Various elements are in progress but we are not ready for a release yet
by Stuntteam
05 Nov 2018, 15:03
Forum: RFlink: General Discussions
Topic: Arduino 433MHz library for sending data to rflink
Replies: 3
Views: 753

Re: Arduino 433MHz library for sending data to rflink

There are various solutions. The main rule is that you need to use a solution that transmits data in a format RFLink understands. A good start is probably to use something like this: https://github.com/deberman/OS_V2.1_temp-hum_sensor Thdere are many more solutions out there. It all depends on what ...
by Stuntteam
26 Oct 2018, 13:06
Forum: RFLink: Unsupported devices
Topic: Profalux, Reception okay, how to issue an RF command
Replies: 4
Views: 420

Re: Profalux, Reception okay, how to issue an RF command

Yes, you can use rflink to push the buttons
Use the mini gpio function and connect the io pins to the remote...

Alternative is that you hack the remote and extract the keyloq key :)
by Stuntteam
22 Oct 2018, 11:56
Forum: RFLink: Hardware Related discussions
Topic: RFLink with CC1101
Replies: 3
Views: 700

Re: RFLink with CC1101

On the link posted earlier there are alternatives for the Aurel transceiver.. Using an RXB6 you can build the full thing (including Arduino Mega and NRF) for less than 10 euro's! There is no priority for CC1101 support. I rather have more devices supported and add more powerfull modules than a CC1101.
by Stuntteam
20 Oct 2018, 09:48
Forum: RFLink: Hardware Related discussions
Topic: RFLink with CC1101
Replies: 3
Views: 700

Re: RFLink with CC1101

The supported hardware is listed on this page: http://www.rflink.nl/blog2/wiring
There is no mention of and no support for the CC1101 at this time.
by Stuntteam
20 Oct 2018, 09:47
Forum: RFLink: Development and announcements
Topic: Advice for 868Mhz RFLink
Replies: 4
Views: 946

Re: Advice for 868Mhz RFLink

The supported hardware is listed on this page: http://www.rflink.nl/blog2/wiring
by Stuntteam
18 Oct 2018, 08:41
Forum: RFLink: Development and announcements
Topic: Advice for 868Mhz RFLink
Replies: 4
Views: 946

Re: Advice for 868Mhz RFLink

manuito wrote:
17 Oct 2018, 22:59
  • Should I start my project right now, and buy the only RfLink compliant tranceiver at all cost (Aurel, hard to find, and > 20€ !!!) ?
Yes.
manuito wrote:
17 Oct 2018, 22:59
  • Or I have missed it and you can already drive any 868 / FSK transceiver with RfLink, like the CC1101 ?
No.
by Stuntteam
11 Oct 2018, 17:45
Forum: RFLink: Hardware Related discussions
Topic: RFLink and CC2500
Replies: 3
Views: 558

Re: RFLink and CC2500

You need to enable ansluta.. if it detects the cc2500 all is fine, if it gives an error message then the cc2500 is not responding as expected.
Enabling is done with the rflink loader..
by Stuntteam
01 Oct 2018, 11:27
Forum: RFLink: Unsupported devices
Topic: Rflink 868Mhz sensor unsupported
Replies: 1
Views: 329

Re: Rflink 868Mhz sensor unsupported

Here you can find the list of devices that are known to be working: http://www.rflink.nl/blog2/devlist If your device is not on that list, it might or might not be supported. The only way to know for sure is test.. If you do not receive any data at all in a test, it is not supported due to a differe...
by Stuntteam
28 Aug 2018, 20:37
Forum: RFLink: Development and announcements
Topic: RFLink R48 available
Replies: 20
Views: 6672

Re: RFLink R48 available

Wiping the post is the worst way of dealing with new development in my opinion. Releasing under the RFlink name and posting about it in the announcements forum is in my opinion disrespectful. If anyone wants to change my mind or tell me I am an ass then do so via PM or email.. (frankzirrone@gmail.c...
by Stuntteam
24 Aug 2018, 14:38
Forum: RFLink: Development and announcements
Topic: RFLink R48 available
Replies: 20
Views: 6672

Re: RFLink R48 available

It has nothing to do with liking or disliking open source. Alternative versions makes development much harder for us due to unknown/unwanted changes in the code affecting timing etc. So it is more like quality control. It is one of the reasons we put a limitation on the distribution of the source co...
by Stuntteam
22 Aug 2018, 19:59
Forum: RFLink: Development and announcements
Topic: RFLink R48 available
Replies: 20
Views: 6672

Re: RFLink R48 available

The framework is open-source and thus available, it is all you need for plugin development.
However, the number of contributions can be counted on one hand. This obviously means there is no need for it.
The full sources are semi public, those who need it have access to it.
by Stuntteam
21 Aug 2018, 14:27
Forum: RFLink: Development and announcements
Topic: RFLink R48 available
Replies: 20
Views: 6672

Re: RFLink R48 available

Asked and answered before.. there will be updates when needed.
In the mean time we are improving and testing the code.
by Stuntteam
05 Aug 2018, 10:07
Forum: RFlink: General Discussions
Topic: Is RFlink still supported?
Replies: 3
Views: 1366

Re: Is RFlink still supported?

Yes it is.. we have thousands of requests so it takes time..
by Stuntteam
26 Jul 2018, 08:33
Forum: RFlink: General Discussions
Topic: RFLink, data collection, in Windows
Replies: 2
Views: 668

Re: RFLink, data collection, in Windows

Did you check out Domoticz?
You can run it on Windows and it uses mysql
by Stuntteam
26 Jun 2018, 16:27
Forum: RFLink: Unsupported devices
Topic: Basic wall plugs with codes like 12345ABCDE
Replies: 5
Views: 809

Re: Basic wall plugs with codes like 12345ABCDE

You can make pretty much any code you want with the RFFind option.
Alternatively it is possible to extend the RFlink code, but so far noone needed it and noone bothered to send any debug logs or other info.
by Stuntteam
26 Jun 2018, 12:03
Forum: RFLink: Unsupported devices
Topic: Basic wall plugs with codes like 12345ABCDE
Replies: 5
Views: 809

Re: Basic wall plugs with codes like 12345ABCDE

looks like buttons a,b,c,d,e are corresponding to switch numbers 1,2,3,4,5
by Stuntteam
26 Jun 2018, 09:44
Forum: RFLink: Unsupported devices
Topic: Basic wall plugs with codes like 12345ABCDE
Replies: 5
Views: 809

Re: Basic wall plugs with codes like 12345ABCDE

reverse the dip setting / bits
eg. 00111 becomes 11100
take that as binary and turn into hexadecimal (in this case 0x1c)
and add 0x41 (0x41+ 0x1c = 0x5d)
by Stuntteam
05 Jun 2018, 11:58
Forum: RFLink: Unsupported devices
Topic: Window/Door sensors no OFF signal
Replies: 1
Views: 470

Re: Window/Door sensors no OFF signal

the logged data is corrupted.. (rows are too short..)
make a new debug log and mail that to me.
by Stuntteam
02 Jun 2018, 12:13
Forum: RFLink: Unsupported devices
Topic: Somfy Soliris Sensor RTS (sun + wind + rain) and Eolis 3D sensor
Replies: 3
Views: 1167

Re: Somfy Soliris Sensor RTS (sun + wind + rain) and Eolis 3D sensor

Most of it should be implemented and working.
If you experience any issues just make a debug log and mail that to me.
by Stuntteam
28 May 2018, 17:40
Forum: RFLink: Hardware Related discussions
Topic: ev1527 on and off commands
Replies: 2
Views: 625

Re: ev1527 on and off commands

This is not really useful for home automation systems since you will never know what state the device is in.
There are plenty of others that have proper distinctive ON and OFF commands.
You should probably tell others what set it is so that people can stay away from it.
by Stuntteam
26 May 2018, 01:02
Forum: RFLink: Development and announcements
Topic: RFLink R48 available
Replies: 20
Views: 6672

Re: RFLink R48 available

We are still working on it.. just not going crazy with releases.
by Stuntteam
23 May 2018, 09:01
Forum: RFlink: General Discussions
Topic: Aurel 868 FSK/OOK
Replies: 2
Views: 639

Re: Aurel 868 FSK/OOK

No, will not work.
by Stuntteam
06 May 2018, 16:03
Forum: RFlink: General Discussions
Topic: X2D/X3D Protocol
Replies: 2
Views: 865

Re: X2D/X3D Protocol

We have addded support for a bunch of models that have been tested so far..
we dont know yet if any model will work.
Time and testing will tell.
by Stuntteam
06 May 2018, 12:45
Forum: RFlink: General Discussions
Topic: Philips SBC Wallsockets
Replies: 3
Views: 1123

Re: Philips SBC Wallsockets

They should be detected but you can also use the rffind feature to learn them
by Stuntteam
30 Apr 2018, 12:44
Forum: RFLink: Hardware Related discussions
Topic: Issue Pairing RTS
Replies: 7
Views: 1381

Re: Issue Pairing RTS

Make a debug log of your original remote..
Push the up/down/my buttons
Put the debug data in a mail to me (frankzirrone@gmail.com)