Search found 778 matches

by Stuntteam
31 Jan 2025, 12:45
Forum: RFLink: Unsupported devices
Topic: TFA Dostmann 30.3222.02 combi sensor
Replies: 4
Views: 2627

Re: TFA Dostmann 30.3222.02 combi sensor

Hi,

Humidity: 82 %
20;03;TFA;ID=0f5f04;TEMP=0057;HUM=52;

The humidity is spot on.
0x52 is a hexadecimal value. Which is 82 in decimal.
Your automation software usually takes care of these conversions.

I will check what is wrong on the windspeed detection..
by Stuntteam
17 Jan 2025, 10:55
Forum: RFlink: General Discussions
Topic: About Santa =)
Replies: 8
Views: 5894

Re: About Santa =)

Yeah.. sorry, a bit late for a Santa release..:)
but too much on my plate atm.
Will be available asap.
by Stuntteam
28 Dec 2024, 20:58
Forum: RFlink: General Discussions
Topic: About Santa =)
Replies: 8
Views: 5894

Re: About Santa =)

New version will be available soon.
We have added full support for Keeloq protocol includion encryption/decryption.
Keys will be needed but we have a way to obtain keys.
by Stuntteam
14 May 2024, 20:06
Forum: RFlink: General Discussions
Topic: Wrong serial data?
Replies: 1
Views: 4246

Re: Wrong serial data?

Thanks for reporting, should be solved in the next release..
by Stuntteam
12 May 2024, 10:47
Forum: RFlink: General Discussions
Topic: Basic instructions to get blinds connected to RFLink
Replies: 3
Views: 4567

Re: Basic instructions to get blinds connected to RFLink

I think the bi-directional models are not supported yet..
by Stuntteam
02 Apr 2024, 16:45
Forum: RFLink: Nederlands support forum
Topic: Problemen met 868 MHZ (Egardia/Woonveilig)
Replies: 9
Views: 8431

Re: Problemen met 868 MHZ (Egardia/Woonveilig)

Op de transceiver staat: RTX-MID-868 Dat moet volgens het label inderdaad de 868mhz zijn. De sensoren doen het doen zijn: Sonoff pir2 Alle e-tiger deur/raam sensoren (heb beide generaties). Beide pir sensoren (pet friendly en de gewone) En hun brandalarmen. Zijn dat allemaal 433mhz sensoren? Ik ont...
by Stuntteam
01 Apr 2024, 19:54
Forum: RFLink: Nederlands support forum
Topic: Problemen met 868 MHZ (Egardia/Woonveilig)
Replies: 9
Views: 8431

Re: Problemen met 868 MHZ (Egardia/Woonveilig)

>Wat mij tijdens het testen wel op viel, maar niet weet of dit een raar is, is dat al mijn 433MHZ sensoren wel ontvangen worden (het zij met heel slecht bereik (lees 2 meter). Ik heb geen idee wat je precies voor hardware gebruikt, maar... Als je een 868mhz ontvanger hebt dan ontvang je daar geen 43...
by Stuntteam
06 Mar 2024, 11:28
Forum: RFLink: Unsupported devices
Topic: Renkforce FT007TH
Replies: 9
Views: 45182

Re: Renkforce FT007TH

Hi,
data was ok, things are in progress.
by Stuntteam
19 Feb 2024, 10:17
Forum: RFLink: French support forum
Topic: Rebuild un RFLINK
Replies: 1
Views: 5237

Re: Rebuild un RFLINK

je pense opter our un RBX8 au lieu d'un RBX6... est ce une bonne solution ? Unknown, untested. Perhaps someone else tried it... pour l'émetteur je reste sur un basique FS1000A mais j'ai en stock des H34C et des SY115, que choisir ? Not much difference. je suis tombé sur un Module Émetteur-Récepteur...
by Stuntteam
09 Feb 2024, 16:30
Forum: RFLink: Nederlands support forum
Topic: Ondersteuning uno R4 WiFi
Replies: 3
Views: 6605

Re: Ondersteuning uno R4 WiFi

Nee, is er niet.
Ik ben wel bezig met een ESP versie.
by Stuntteam
01 Feb 2024, 16:35
Forum: RFlink: General Discussions
Topic: Somfy RTS: Firmware - regression with Eolis 3D ?
Replies: 8
Views: 9301

Re: Somfy RTS: Firmware - regression with Eolis 3D ?

Hmm, strange,..
At least not intentional.
Can you make debug logs?
(see: https://www.rflink.nl/develop.php)
by Stuntteam
30 Jan 2024, 15:38
Forum: RFlink: General Discussions
Topic: RFLink 868MHz - Would it work for Griesser blinds ?
Replies: 5
Views: 7672

Re: RFLink 868MHz - Would it work for Griesser blinds ?

The PCB shows that it is actualyl an Elero remote control. They use some form of scrambling and a rolling code. I did not find any info revelaing the modulation type. This does need to match the recveiver chip or the receiver must allow setting it on the fly. One thing is sure, it will not work &quo...
by Stuntteam
30 Jan 2024, 15:30
Forum: RFlink: General Discussions
Topic: Do RFLink firmware upgrades preserve data ?
Replies: 2
Views: 5462

Re: Do RFLink firmware upgrades preserve data ?

Normally you should not loose settings.
but you might want to write down the data table that is visible with rtsshow
by Stuntteam
26 Jan 2024, 00:22
Forum: RFLink: Unsupported devices
Topic: Renkforce FT007TH
Replies: 9
Views: 45182

Re: Renkforce FT007TH

It's ok :)
by Stuntteam
25 Jan 2024, 19:09
Forum: RFLink: Unsupported devices
Topic: Renkforce FT007TH
Replies: 9
Views: 45182

Re: Renkforce FT007TH

Yes, always good to have a bit more to verify we can catch all packet types
by Stuntteam
24 Jan 2024, 16:42
Forum: RFLink: Unsupported devices
Topic: LaCrosse with TX141TH-BV3 sensor
Replies: 6
Views: 29630

Re: LaCrosse with TX141TH-BV3 sensor

So far the logs we have received indicate that there are some different flavors. More work is needed to get them all working.
by Stuntteam
24 Jan 2024, 16:41
Forum: RFLink: Unsupported devices
Topic: Renkforce FT007TH
Replies: 9
Views: 45182

Re: Renkforce FT007TH

Can you provide a debug log as shown here: https://www.rflink.nl/develop.php
But for step 3 activate only the logmode unhandled
That might help in improving things.
by Stuntteam
24 Jan 2024, 16:37
Forum: RFLink: Unsupported devices
Topic: Unknown device uncommon to integrate (Piazzetta P956)
Replies: 6
Views: 40670

Re: Unknown device uncommon to integrate (Piazzetta P956)

We are still looking into this. One problem seems to be that the RF signal for ON and OFF is the same. At least the logs I got so far are showing only 1 packet for on and off.. It would be good if anyone can confirm this is the case. Anyway, if so then due this this and the fact that RF packets can ...
by Stuntteam
24 Jan 2024, 16:26
Forum: RFLink: Unsupported devices
Topic: Lacrosse WS2500-19 brightness sensor
Replies: 23
Views: 36458

Re: Lacrosse WS2500-19 brightness sensor

It has been fixed and tested.
It will be in the upcoming release (52).
by Stuntteam
23 Jan 2024, 15:00
Forum: RFLink: Unsupported devices
Topic: Zaffer blinds (shutters) not supported
Replies: 28
Views: 26342

Re: Zaffer blinds (shutters) not supported

Thanks,
good news.. propper support for Zaffer will be added to the next release..
by Stuntteam
20 Jan 2024, 19:43
Forum: RFlink: General Discussions
Topic: RFLINK 1.51 & Hager
Replies: 2
Views: 5523

Re: RFLINK 1.51 & Hager

HI,
Please send me log data for all options/buttons so I can check what is going on. (frankzirrone@gmail.com)
by Stuntteam
18 Jan 2024, 09:32
Forum: RFlink: General Discussions
Topic: RFLink 868MHz - Would it work for Griesser blinds ?
Replies: 5
Views: 7672

Re: RFLink 868MHz - Would it work for Griesser blinds ?

Besides the frequency also the modulation type is important. RFlink currently supports ASK/OOK modulation. If the blinds work with some other type of modulation nothing is received. Give it a try to see if something is received... or.. Open the remote and look inside at the parts, possibly they reve...
by Stuntteam
16 Jan 2024, 23:34
Forum: RFLink: Unsupported devices
Topic: Zaffer blinds (shutters) not supported
Replies: 28
Views: 26342

Re: Zaffer blinds (shutters) not supported

Yes, if you can make a debug log and mail that to me it would be great..!
by Stuntteam
12 Jan 2024, 16:25
Forum: RFLink: Development and announcements
Topic: RFLink R51 available
Replies: 0
Views: 39259

RFLink R51 available

RFLink v1.1 R51 (12-01-2024) - New Device: Unitec W186-F Temperature sensor - New Device: Amazon Basics Meat Thermometer - New Device: Valoin Wireless Digital Meat Thermometer With Dual Probe - New Device: Atech-WS308 temperature sensor - New Device: Auriol 4-LD5661, Auriol 4-LD5972, Auriol 4-LD6313...
by Stuntteam
10 Jan 2024, 15:39
Forum: RFlink: General Discussions
Topic: Begginers' documentation not really availlable, right?
Replies: 1
Views: 21981

Re: Begginers' documentation not really availlable, right?

Did you check out: https://www.rflink.nl/index.php
it has a step by step introduction to the world of home automation..
by Stuntteam
09 Jan 2024, 23:56
Forum: RFLink: Unsupported devices
Topic: LaCrosse with TX141TH-BV3 sensor
Replies: 6
Views: 29630

Re: LaCrosse with TX141TH-BV3 sensor

TXT141-BV2 is supported, we are looking at the BV3..
by Stuntteam
09 Jan 2024, 23:54
Forum: RFLink: Unsupported devices
Topic: Funkbus (send) in V1.50 not working correctly
Replies: 3
Views: 25721

Re: Funkbus (send) in V1.50 not working correctly

Thanks, I will take a look at this.
by Stuntteam
06 Jan 2024, 15:25
Forum: RFlink: General Discussions
Topic: R50 version string?
Replies: 3
Views: 27024

Re: R50 version string?

bbq thermometer, Bresser/baldr and FT007 I see.. Should not be too much of a problem with the optimized code.. lets see.
by Stuntteam
06 Jan 2024, 12:20
Forum: RFlink: General Discussions
Topic: R50 version string?
Replies: 3
Views: 27024

Re: R50 version string?

The Version text indeed changed:
20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R50

Version 51 is planned as well.
I will check if I can make a link between your forum username and an email to see what you mailed and if I can implement it asap..
by Stuntteam
03 Jan 2024, 14:59
Forum: RFlink: General Discussions
Topic: LightwaveRF devices on v1.50
Replies: 1
Views: 8266

Re: LightwaveRF devices on v1.50

See email..
by Stuntteam
03 Jan 2024, 10:01
Forum: RFlink: General Discussions
Topic: PCR800X
Replies: 2
Views: 23942

Re: PCR800X

Hi,

I just tested the PCR800 and all seems fine.
Can you make a debug log as described here: https://www.rflink.nl/develop.php
and mail that to me?
by Stuntteam
01 Jan 2024, 19:58
Forum: RFLink: Hardware Related discussions
Topic: Nodo 868 RFLink & TFA IT transmitter
Replies: 6
Views: 30682

Re: Nodo 868 RFLink & TFA IT transmitter

Unsupported devices should show debug data if they use the same frequency and modulation type of the used receiver hardware module. Additionally they need to be within the ranges of accepted pulse length. I have some question marks around the modulation type, it might not use ASK/OOK but rather use ...
by Stuntteam
29 Dec 2023, 15:29
Forum: RFLink: Unsupported devices
Topic: Falmec Support
Replies: 5
Views: 29288

Re: Falmec Support

Please provide additional debug data for non supported buttons..
by Stuntteam
29 Dec 2023, 15:19
Forum: RFLink: Hardware Related discussions
Topic: Nodo 868 RFLink & TFA IT transmitter
Replies: 6
Views: 30682

Re: Nodo 868 RFLink & TFA transmitter

I have not seen any reports on TFA 30.3180, so it is probably not supported..
by Stuntteam
24 Dec 2023, 14:06
Forum: RFLink: Development and announcements
Topic: RFLink R50 available
Replies: 0
Views: 31549

RFLink R50 available

RFLink v1.1 R50 (24-12-2023) - New Device: Abalon Curtain remote (BE301) (receive) - New Device: Lanboo Curtain remote (receive) - New Device: Zaffer Blinds remote (receive) - New Device: Marimex Pool Thermometer - New Device: Gira 225500 - New Device: Deltia 8.33 - Thermostat - X2D - New Device: De...
by Stuntteam
20 Dec 2023, 18:45
Forum: RFlink: General Discussions
Topic: Lost remote
Replies: 6
Views: 10944

Re: Lost remote

It largely depends on the type of Brennenstuhl device. There are the models that follow the ARC protocol which have dip switches or wheels to set the device address. There are also the models that use auto-learn with encrypted communication. Both should be supported by RFLink. However, the packet st...
by Stuntteam
08 Dec 2023, 13:42
Forum: RFlink: General Discussions
Topic: Outdated FAQ Hardware article
Replies: 1
Views: 6308

Re: Outdated FAQ Hardware article

You will need an Arduino Mega 2560.

Regarding pricing.. : as low as 6,01 euro's (without a cable)...
https://nl.aliexpress.com/item/32850843888.html
Image
by Stuntteam
17 Nov 2023, 19:18
Forum: RFLink: Hardware Related discussions
Topic: Trouble Connecting "NODO NRF24L01" to Arduino Mega
Replies: 1
Views: 6731

Re: Trouble Connecting "NODO NRF24L01" to Arduino Mega

Do you have any NODO transmitting devices? As NODO is much more DIY and hands-on you would probably already know how to wire. If you dont have NODO devices it does not make sense to wire RFLink for it. You can be sure it will not receive signals from other non-NODO devices. It will for sure not help...
by Stuntteam
17 Nov 2023, 19:16
Forum: RFLink: Unsupported devices
Topic: 2.4 Ghz Ceiling Fan Remote Support
Replies: 1
Views: 6631

Re: 2.4 Ghz Ceiling Fan Remote Support

The short answer: No.

The long answer is that it takes a lot of time and effort to get the signal sorted out. It also would require access to the transmitting device. Right now my limited time goes to improving the current firmware and adding support for devices that are widely used.
by Stuntteam
04 Oct 2023, 12:38
Forum: RFlink: General Discussions
Topic: How to control Wave Design extractor hood from Home Assistant?
Replies: 4
Views: 8108

Re: How to control Wave Design extractor hood from Home Assistant?

> each of the relevant button presses but they do not control the extractor hood. Did you try to use RFLink with the RFLink loader directly? Thus not using HA to see where the problem lies. Possibly the detection is faulty. In that case debug logs are needed. Look here: https://www.rflink.nl/develop...
by Stuntteam
20 Sep 2023, 17:14
Forum: RFlink: General Discussions
Topic: X10 meter protocol
Replies: 2
Views: 7035

Re: X10 meter protocol

Very old threads.. also many firmware versions ago.
arcadien should show some more data if he wants help..
Like what data he is sending and what data is received.

It might just be that he sends decimal numbers and receives the value in hexadecimal or something like that.
by Stuntteam
13 Sep 2023, 16:57
Forum: RFlink: General Discussions
Topic: Set Somfy RTS blind in pairing mode from RFLink
Replies: 4
Views: 9162

Re: Set Somfy RTS blind in pairing mode from RFLink

The pair command is the same as pressing the button at the back of the remote.
It is used for registering and deregistering remotes from the motors memory..
by Stuntteam
13 Sep 2023, 16:53
Forum: RFlink: General Discussions
Topic: Pairing multiple RTS blinds with the same RFLink record
Replies: 4
Views: 9329

Re: Pairing multiple RTS blinds with the same RFLink record

Following the grouping instructions:
https://www.diyblinds.com.au/guides/how ... mfy-remote
I assume its RC + 1
Not 100% sure though.
Did you setup your original remote and group it as well?
If so, check the debug log (if needed mail me at frankzirrone@gmail.com
by Stuntteam
12 Sep 2023, 08:46
Forum: RFlink: General Discussions
Topic: Pairing multiple RTS blinds with the same RFLink record
Replies: 4
Views: 9329

Re: Pairing multiple RTS blinds with the same RFLink record

The pairing procedure is the same as with original remotes. You can hook one remote up to multiple blinds.
However, it is more useful to create a different ID for each blind and have the home automation software take care of combining all blinds to one up/down command.
by Stuntteam
12 Sep 2023, 08:44
Forum: RFlink: General Discussions
Topic: Set Somfy RTS blind in pairing mode from RFLink
Replies: 4
Views: 9162

Re: Set Somfy RTS blind in pairing mode from RFLink

UP, DOWN, STOP, PAIR are available
ON and OFF can also be used as equivalent of UP and DOWN
by Stuntteam
28 Jul 2023, 00:47
Forum: RFLink: Hardware Related discussions
Topic: Run RFlink on a esp8266/esp32
Replies: 1
Views: 6798

Re: Run RFlink on a esp8266/esp32

Noty for now.But we might come with a solution..
by Stuntteam
14 Jul 2023, 17:12
Forum: RFlink: General Discussions
Topic: GPIOset Default On (high)
Replies: 2
Views: 7587

Re: GPIOset Default On (high)

A number of pins (4,5,6, and 7) are setup for configuration tasks.. For example: Mega Pin7: connected to ground = no pullup on the RF module signal (default = not connected, pullup enabled) Mega Pin5: connected to ground = GPIO low on startup (default = not connected, GPIO high on startup) Try to co...
by Stuntteam
13 Jul 2023, 15:10
Forum: RFLink: Unsupported devices
Topic: WS8818/TX
Replies: 2
Views: 7654

Re: WS8818/TX

Read here about what to do with unsupported sensors:
https://www.rflink.nl/develop.php