Search found 36 matches

by grz3
07 Dec 2016, 08:57
Forum: ESP Easy: Projects / Applications
Topic: DSM501 dust sensor plugin
Replies: 3
Views: 8096

Re: DSM501 dust sensor plugin

did some one figured out how to connect this sensor to ESP? which pin to which? any aditional components are needed? thank you for any help or scheme.
grz
by grz3
28 Nov 2016, 22:03
Forum: ESP Easy: General Discussion
Topic: How to use plugin?
Replies: 5
Views: 7313

Re: How to use plugin?

just copy .ino file to your espeasy directory and compile it.. upload, and in devices you'll find that plugin...
by grz3
28 Nov 2016, 02:29
Forum: RFLink: Unsupported devices
Topic: cheap LIDL weather station
Replies: 1
Views: 3839

cheap LIDL weather station

Hello, can you add support for this LIDL cheap (appx. 50eur) weather station?

Auriol H13726
Ventus WS155,
Hama EWS 1500,
Meteoscan W155/W160


I found this protocol: http://www.tfd.hu/tfdhu/files/wsprotoco ... ol_v20.pdf if you need, I can scan debug file in RFLINK...
by grz3
28 Oct 2016, 21:32
Forum: ESP Easy: Hardware
Topic: Which LUX sensor
Replies: 22
Views: 34149

Re: Which LUX sensor

im using / testing both BH1750 & TLS2561. - BH1750 gives results in two decimals, TLS2561 gives only whole numbers. (don't understand ms times in setup of TLS2561???) - results of both sensors are similar - max 0.8 lux diff. (when placed side by side) - in low light or standard daylight/room bul...
by grz3
17 Oct 2016, 20:44
Forum: ESP Easy: Hardware
Topic: BMP280 (GY-BME/P280) Reading all 0.0's [FIXED: IDX/VAR was 0]
Replies: 8
Views: 22814

Re: BMP280 (GY-BME/P280) Reading all 0.0's [FIXED: IDX/VAR was 0]

what about a comment to IDX that value 0=no use of sensor, value !=0 sensor in use? i think 1/2of user complaints about not working sensors will be solved :-)
by grz3
03 Oct 2016, 08:24
Forum: ESP Easy: Software
Topic: Deep Sleep mode
Replies: 26
Views: 52012

Re: Deep Sleep mode

Hello All,

can i setup espeasy v133 in deepsleep mode + PIR senosr on any PIN (e.g GPIO12??)? I'd like to run this sensor on battery. When someone activate PIR, it will wakeup esp and send status to DOmoticz? Or is it not possible to do such a thing in deepsleep mode?

thank you.
grz
by grz3
12 Jul 2016, 22:05
Forum: RFLink: Development and announcements
Topic: RFLink release 42 is available for download
Replies: 25
Views: 37339

Re: RFLink release 42 is available for download

is there available any smaller version of arduino mega (like nano) which will RFLINK fit into?
by grz3
30 Jun 2016, 22:49
Forum: ESP Easy: Hardware
Topic: New ESP gadget
Replies: 326
Views: 655790

Re: New ESP gadget

Hello, you can use this... define new device type switch... (i got old sonoff with 4pins) and soldered external switch on/off to small switch onboard (it is just push),.. 1.jpg then in rules define following... 2.jpg EDIT: and forgot to write, you can UNTICK "SEND DATA" coz you are not usi...
by grz3
02 Jun 2016, 08:21
Forum: ESP Easy: Hardware
Topic: 2x INA219 and ESPeasy
Replies: 7
Views: 11458

2x INA219 and ESPeasy

Hello, can some1 help me, how can I use 2 modules INA219 for measuring VOltage and CUrrent? currently my setup is: 1x 6v 500mA solar panel connected thru diode to TP4059: (e.g. this one: http://www.ebay.com/itm/micro-USB-PCM-Ladegerat-Li-po-Li-Ion-charger-1A-1S-Akku-3-7-Arduino-TP4056-/321352744478?...
by grz3
24 May 2016, 13:34
Forum: ESP Easy: Hardware
Topic: Wifi IoT Relay Board Based on ESP8266
Replies: 7
Views: 12624

Re: Wifi IoT Relay Board Based on ESP8266

does it works for you sda/scl pins if you connect any i2c senzor there? my goes crazy and not working with pin 4/5... only with pin 1/3 (in espeasy i disabled serial option)
by grz3
24 May 2016, 11:23
Forum: ESP Easy: Projects / Applications
Topic: current measure
Replies: 27
Views: 39745

Re: current measure

by grz3
24 May 2016, 01:53
Forum: ESP Easy: Software
Topic: howto right align on LCD
Replies: 2
Views: 3319

Re: howto right align on LCD

something like this works for me:
out: [temp2#temperature#R] C
by grz3
18 May 2016, 16:38
Forum: RFLink: Unsupported devices
Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
Replies: 9
Views: 10635

Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch

ok, thank you. but is there any chance, to enter it manualy? I got only 4 buttons, so I can let domoticz learn only 4codes, in 2gang switch i can also use not just push ON, push OFF but also SWITCH and there is no room in remote for that :-) i was trying every option in manual add switch, and didn't...
by grz3
17 May 2016, 20:41
Forum: RFLink: Unsupported devices
Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
Replies: 9
Views: 10635

Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch

flashed that FW, now it is working like this: 20;07;EV1527;ID=029d69;SWITCH=04;CMD=ON; 20;08;EV1527;ID=029d69;SWITCH=08;CMD=ON; 20;09;EV1527;ID=029d69;SWITCH=02;CMD=ON; 20;0A;EV1527;ID=029d69;SWITCH=01;CMD=ON; so in domoticz I can manual add 4diff switches under switch type: button ON, and type: ARC...
by grz3
16 May 2016, 20:13
Forum: RFLink: Unsupported devices
Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
Replies: 9
Views: 10635

Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch

and with debug on: hope it helps.... key A: 20;20;DEBUG;Pulses=44;Pulses(uSec)=1260,60,1170,60,1140,60,420,810,1140,90,420,810,420,810,390,810,1110,120,1080,150,360,840,1110,120,360,840,360,870,360,840,1080,150,360,840,360,870,1050,180,360,870,360,870,360,6990; 20;21;DEBUG;Pulses=50;Pulses(uSec)=111...
by grz3
16 May 2016, 20:09
Forum: RFLink: Unsupported devices
Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
Replies: 9
Views: 10635

Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch

this is output: 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R41; 10;version; 20;01;VER=1.1;REV=41;BUILD=03; this is key A: 20;12;Eurodomest;ID=022e5d;SWITCH=05;CMD=ALLON; 20;13;EV1527;ID=0dd1a2;SWITCH=04;CMD=ON; this is key B: 20;14;Eurodomest;ID=022e5d;SWITCH=07;CMD=ALLOFF; 20;15;EV1527;I...
by grz3
04 May 2016, 21:48
Forum: RFLink: Unsupported devices
Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
Replies: 9
Views: 10635

Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch

yes. i got it.
it uses small 433mhz remote... scan is here: on chip, there is HS1527 (08GH0)
remo.jpg
remo.jpg (129.6 KiB) Viewed 10613 times
by grz3
03 May 2016, 17:07
Forum: RFLink: Unsupported devices
Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
Replies: 9
Views: 10635

Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch

Any chance, to get support for these cheap wall 433mhz switches?
here is the link for ebay: http://www.ebay.com/itm/281730112717
by grz3
03 May 2016, 00:45
Forum: ESP Easy: Hardware
Topic: New ESP gadget
Replies: 326
Views: 655790

Re: New ESP gadget

bought these. but I flashed latest R105 to it, connected with FTDI 5V adapter to 5V pin and GND.. but in i2cscann it gives me errors :-(.. any help? There is a powersource on the board, I hope it is a decent one After flashing remove the ftdi connection, and use the powersource on the board The FTD...
by grz3
30 Apr 2016, 21:54
Forum: ESP Easy: Hardware
Topic: New ESP gadget
Replies: 326
Views: 655790

Re: New ESP gadget

One other nice ESP gadget ; http://www.electrodragon.com/w/ESP_Relay_Board#Pin_Mapping_and_Wiring Nice, 2 relays and more pins easy available. For about the same amount of money as the Sonoff bought these. but I flashed latest R105 to it, connected with FTDI 5V adapter to 5V pin and GND.. but in i2...
by grz3
26 Apr 2016, 08:32
Forum: ESP Easy: Software
Topic: Rules examples
Replies: 41
Views: 66762

Re: Rules examples

any chance to use something like this? to compare PN532 tags? on pn532#tag do if [pn532#tag]="4034998235" // correct tag gpio,15,1 //green led - ok timerSet,1,1 else gpio,13,1 //red led - stop timerSet,1,1 endif endon on Rules#timer=1 do gpio,15,0 gpio,13,0 endon did you tried this, if it...
by grz3
13 Apr 2016, 23:18
Forum: ESP Easy: Software
Topic: Rules examples
Replies: 41
Views: 66762

Re: Rules examples

any chance to use something like this?
to compare PN532 tags?

Code: Select all

on pn532#tag do
if [pn532#tag]="4034998235" // correct tag
    gpio,15,1  //green led - ok
   timerSet,1,1
else
    gpio,13,1  //red led - stop
   timerSet,1,1
endif
endon
on Rules#timer=1 do
    gpio,15,0
    gpio,13,0
endon
by grz3
07 Apr 2016, 22:24
Forum: RFLink: Unsupported devices
Topic: Solved: Livolo Switch
Replies: 8
Views: 9139

Re: Livolo Switch - Fixed

Hello,
but i only got remote wall switch , which is receiver only. I don't have any livolo sender remote. ;(
by grz3
07 Apr 2016, 20:39
Forum: RFLink: Unsupported devices
Topic: Solved: Livolo Switch
Replies: 8
Views: 9139

Re: Livolo Switch - Fixed

helo, are you using domoticz with livolo? I can't get it working correctly, create manual switch, choice name, gw rflink, and switch type ON/OFF, type: LIVOLO, and adress 00:00. it is not sending any commands.. i tried change adress to e.g. e2:00 it is working, but "bulb" in domoticz is al...
by grz3
07 Apr 2016, 19:47
Forum: ESP Easy: Hardware
Topic: H801 : RGB controller based on ESP8266 avalaible from China
Replies: 134
Views: 182276

Re: H801 : RGB controller based on ESP8266 avalaible from China

this would be great functionality....

btw: i'm on espeasy V94, with these settings:
ESP Chip ID: 137877
Flash Chip ID: 1327328
Flash Size: 1024 kB
Free Mem: 25664

and compiled with ide 1.6.5 with these:
by grz3
07 Apr 2016, 16:16
Forum: ESP Easy: Hardware
Topic: H801 : RGB controller based on ESP8266 avalaible from China
Replies: 134
Views: 182276

Re: H801 : RGB controller based on ESP8266 avalaible from China

for me this pluging working OK. try connections if they are OK. what I'm missing here, H801 with espeasy and your plugin, connected to DOMOTICZ, in domoticz i setup MIIlight hardware with RGBW, but i'm not able to utilize WHITE LEDS, always it is just RGB mixture of collors. If I switch to RGB in do...
by grz3
03 Apr 2016, 15:15
Forum: ESP Easy: General Discussion
Topic: OLED Scrolling Display
Replies: 122
Views: 168210

Re: OLED Scrolling Display

super. working now great...
by grz3
03 Apr 2016, 11:37
Forum: ESP Easy: General Discussion
Topic: OLED Scrolling Display
Replies: 122
Views: 168210

Re: OLED Scrolling Display

hm, i got these errors when try to compile under ide 1.6.5 and esp2.1.0 core: added esp8266-oled-ssd1306 to local libs... _P205_FrameOLED.ino: In function 'boolean Plugin_205(byte, EventStruct*, String&)': _P205_FrameOLED.ino:375:46: error: 'string2Integer' was not declared in this scope _P205_F...
by grz3
31 Mar 2016, 08:44
Forum: ESP Easy: General Discussion
Topic: MLX90614
Replies: 18
Views: 17765

Re: MLX90614

as @ger explained:
Port is used as offset for the default i2c address from the MLX90614 (5A)
If you use a standard MLX90614 you must use port 0.
by grz3
30 Mar 2016, 23:26
Forum: ESP Easy: General Discussion
Topic: MLX90614
Replies: 18
Views: 17765

Re: MLX90614

in TOOLS -> i2c scan (button) this will scan your i2c... if nothing there, you got problem with connection of MLX to ESP....
my screen looks like this...0x5a - no comment,but it is MLX...
i2c.jpg
i2c.jpg (15.94 KiB) Viewed 14933 times
by grz3
30 Mar 2016, 22:31
Forum: ESP Easy: General Discussion
Topic: MLX90614
Replies: 18
Views: 17765

Re: MLX90614

@ngc981
see my task for MLX... in PORT, use 0 instead of yours 80
my MLX sensor is on i2c address 0x5a
mlx.jpg
mlx.jpg (33.48 KiB) Viewed 14947 times
by grz3
30 Mar 2016, 20:33
Forum: ESP Easy: General Discussion
Topic: MLX90614
Replies: 18
Views: 17765

Re: MLX90614

Hello, use port 0 and it will work...
by grz3
30 Mar 2016, 15:35
Forum: ESP Easy: General Discussion
Topic: global sync
Replies: 13
Views: 12970

Re: global sync

great wiki, super working now! thank you.
by grz3
29 Mar 2016, 23:50
Forum: ESP Easy: General Discussion
Topic: global sync
Replies: 13
Views: 12970

global sync

Hello I didn't found any info how to use global sync feature. any one to help?
i got 2 esp12, with ds18b20 and OLED. in tools->advances i checked GLOBAL SYNC, and in DEVICES in ds18b20 i also checked gloal sync. how can I display on another esp's these oled values?
thank you
by grz3
22 Feb 2016, 20:43
Forum: ESP Easy: Hardware
Topic: New ESP gadget
Replies: 326
Views: 655790

Re: New ESP gadget

I saw, that the LED got 3legs - so it is two state led, isn't it? not only green, but also red? can I use this second color with any other gpio?
i got sonoff w/o 433module
thank you
grz
by grz3
21 Feb 2016, 21:48
Forum: ESP Easy: Hardware
Topic: New ESP gadget
Replies: 326
Views: 655790

Re: New ESP gadget

Hello,

what kind of GPIO are on this SONOFF device? I think GPIO13 is relay, what is button? or LED? is led GREEN/RED? thank you....

grz