did some one figured out how to connect this sensor to ESP? which pin to which? any aditional components are needed? thank you for any help or scheme.
grz
Search found 36 matches
- 07 Dec 2016, 08:57
- Forum: ESP Easy: Projects / Applications
- Topic: DSM501 dust sensor plugin
- Replies: 3
- Views: 8156
- 28 Nov 2016, 22:03
- Forum: ESP Easy: General Discussion
- Topic: How to use plugin?
- Replies: 5
- Views: 7374
Re: How to use plugin?
just copy .ino file to your espeasy directory and compile it.. upload, and in devices you'll find that plugin...
- 28 Nov 2016, 02:29
- Forum: RFLink: Unsupported devices
- Topic: cheap LIDL weather station
- Replies: 1
- Views: 3886
cheap LIDL weather station
Hello, can you add support for this LIDL cheap (appx. 50eur) weather station?
Auriol H13726
Ventus WS155,
Hama EWS 1500,
Meteoscan W155/W160
I found this protocol: http://www.tfd.hu/tfdhu/files/wsprotoco ... ol_v20.pdf if you need, I can scan debug file in RFLINK...
Auriol H13726
Ventus WS155,
Hama EWS 1500,
Meteoscan W155/W160
I found this protocol: http://www.tfd.hu/tfdhu/files/wsprotoco ... ol_v20.pdf if you need, I can scan debug file in RFLINK...
- 28 Oct 2016, 21:32
- Forum: ESP Easy: Hardware
- Topic: Which LUX sensor
- Replies: 22
- Views: 34882
Re: Which LUX sensor
im using / testing both BH1750 & TLS2561. - BH1750 gives results in two decimals, TLS2561 gives only whole numbers. (don't understand ms times in setup of TLS2561???) - results of both sensors are similar - max 0.8 lux diff. (when placed side by side) - in low light or standard daylight/room bul...
- 17 Oct 2016, 20:44
- Forum: ESP Easy: Hardware
- Topic: BMP280 (GY-BME/P280) Reading all 0.0's [FIXED: IDX/VAR was 0]
- Replies: 8
- Views: 22928
Re: BMP280 (GY-BME/P280) Reading all 0.0's [FIXED: IDX/VAR was 0]
what about a comment to IDX that value 0=no use of sensor, value !=0 sensor in use? i think 1/2of user complaints about not working sensors will be solved
- 03 Oct 2016, 08:24
- Forum: ESP Easy: Software
- Topic: Deep Sleep mode
- Replies: 26
- Views: 52214
Re: Deep Sleep mode
Hello All,
can i setup espeasy v133 in deepsleep mode + PIR senosr on any PIN (e.g GPIO12??)? I'd like to run this sensor on battery. When someone activate PIR, it will wakeup esp and send status to DOmoticz? Or is it not possible to do such a thing in deepsleep mode?
thank you.
grz
can i setup espeasy v133 in deepsleep mode + PIR senosr on any PIN (e.g GPIO12??)? I'd like to run this sensor on battery. When someone activate PIR, it will wakeup esp and send status to DOmoticz? Or is it not possible to do such a thing in deepsleep mode?
thank you.
grz
- 12 Jul 2016, 22:05
- Forum: RFLink: Development and announcements
- Topic: RFLink release 42 is available for download
- Replies: 25
- Views: 37852
Re: RFLink release 42 is available for download
is there available any smaller version of arduino mega (like nano) which will RFLINK fit into?
- 30 Jun 2016, 22:49
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 718733
Re: New ESP gadget
Hello, you can use this... define new device type switch... (i got old sonoff with 4pins) and soldered external switch on/off to small switch onboard (it is just push),.. 1.jpg then in rules define following... 2.jpg EDIT: and forgot to write, you can UNTICK "SEND DATA" coz you are not usi...
- 02 Jun 2016, 08:21
- Forum: ESP Easy: Hardware
- Topic: 2x INA219 and ESPeasy
- Replies: 7
- Views: 11576
2x INA219 and ESPeasy
Hello, can some1 help me, how can I use 2 modules INA219 for measuring VOltage and CUrrent? currently my setup is: 1x 6v 500mA solar panel connected thru diode to TP4059: (e.g. this one: http://www.ebay.com/itm/micro-USB-PCM-Ladegerat-Li-po-Li-Ion-charger-1A-1S-Akku-3-7-Arduino-TP4056-/321352744478?...
- 24 May 2016, 13:34
- Forum: ESP Easy: Hardware
- Topic: Wifi IoT Relay Board Based on ESP8266
- Replies: 7
- Views: 13595
Re: Wifi IoT Relay Board Based on ESP8266
does it works for you sda/scl pins if you connect any i2c senzor there? my goes crazy and not working with pin 4/5... only with pin 1/3 (in espeasy i disabled serial option)
- 24 May 2016, 11:23
- Forum: ESP Easy: Projects / Applications
- Topic: current measure
- Replies: 27
- Views: 39956
Re: current measure
found this nice setup to test:
http://whatnicklife.blogspot.sk/2015/09 ... itors.html
http://whatnicklife.blogspot.sk/2015/09 ... itors.html
- 24 May 2016, 01:53
- Forum: ESP Easy: Software
- Topic: howto right align on LCD
- Replies: 2
- Views: 3376
Re: howto right align on LCD
something like this works for me:
out: [temp2#temperature#R] C
out: [temp2#temperature#R] C
- 18 May 2016, 16:38
- Forum: RFLink: Unsupported devices
- Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
- Replies: 9
- Views: 10804
Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
ok, thank you. but is there any chance, to enter it manualy? I got only 4 buttons, so I can let domoticz learn only 4codes, in 2gang switch i can also use not just push ON, push OFF but also SWITCH and there is no room in remote for that :-) i was trying every option in manual add switch, and didn't...
- 17 May 2016, 20:41
- Forum: RFLink: Unsupported devices
- Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
- Replies: 9
- Views: 10804
Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
flashed that FW, now it is working like this: 20;07;EV1527;ID=029d69;SWITCH=04;CMD=ON; 20;08;EV1527;ID=029d69;SWITCH=08;CMD=ON; 20;09;EV1527;ID=029d69;SWITCH=02;CMD=ON; 20;0A;EV1527;ID=029d69;SWITCH=01;CMD=ON; so in domoticz I can manual add 4diff switches under switch type: button ON, and type: ARC...
- 16 May 2016, 20:13
- Forum: RFLink: Unsupported devices
- Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
- Replies: 9
- Views: 10804
Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
and with debug on: hope it helps.... key A: 20;20;DEBUG;Pulses=44;Pulses(uSec)=1260,60,1170,60,1140,60,420,810,1140,90,420,810,420,810,390,810,1110,120,1080,150,360,840,1110,120,360,840,360,870,360,840,1080,150,360,840,360,870,1050,180,360,870,360,870,360,6990; 20;21;DEBUG;Pulses=50;Pulses(uSec)=111...
- 16 May 2016, 20:09
- Forum: RFLink: Unsupported devices
- Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
- Replies: 9
- Views: 10804
Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
this is output: 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R41; 10;version; 20;01;VER=1.1;REV=41;BUILD=03; this is key A: 20;12;Eurodomest;ID=022e5d;SWITCH=05;CMD=ALLON; 20;13;EV1527;ID=0dd1a2;SWITCH=04;CMD=ON; this is key B: 20;14;Eurodomest;ID=022e5d;SWITCH=07;CMD=ALLOFF; 20;15;EV1527;I...
- 04 May 2016, 21:48
- Forum: RFLink: Unsupported devices
- Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
- Replies: 9
- Views: 10804
Re: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
yes. i got it.
it uses small 433mhz remote... scan is here: on chip, there is HS1527 (08GH0)
it uses small 433mhz remote... scan is here: on chip, there is HS1527 (08GH0)
- 03 May 2016, 17:07
- Forum: RFLink: Unsupported devices
- Topic: Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
- Replies: 9
- Views: 10804
Cheap 433Mhz 1/2/3 Gang Remote Control Glass Panel Smart Light Switch
Any chance, to get support for these cheap wall 433mhz switches?
here is the link for ebay: http://www.ebay.com/itm/281730112717
here is the link for ebay: http://www.ebay.com/itm/281730112717
- 03 May 2016, 00:45
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 718733
Re: New ESP gadget
bought these. but I flashed latest R105 to it, connected with FTDI 5V adapter to 5V pin and GND.. but in i2cscann it gives me errors :-(.. any help? There is a powersource on the board, I hope it is a decent one After flashing remove the ftdi connection, and use the powersource on the board The FTD...
- 30 Apr 2016, 21:54
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 718733
Re: New ESP gadget
One other nice ESP gadget ; http://www.electrodragon.com/w/ESP_Relay_Board#Pin_Mapping_and_Wiring Nice, 2 relays and more pins easy available. For about the same amount of money as the Sonoff bought these. but I flashed latest R105 to it, connected with FTDI 5V adapter to 5V pin and GND.. but in i2...
- 26 Apr 2016, 08:32
- Forum: ESP Easy: Software
- Topic: Rules examples
- Replies: 41
- Views: 70623
Re: Rules examples
any chance to use something like this? to compare PN532 tags? on pn532#tag do if [pn532#tag]="4034998235" // correct tag gpio,15,1 //green led - ok timerSet,1,1 else gpio,13,1 //red led - stop timerSet,1,1 endif endon on Rules#timer=1 do gpio,15,0 gpio,13,0 endon did you tried this, if it...
- 13 Apr 2016, 23:18
- Forum: ESP Easy: Software
- Topic: Rules examples
- Replies: 41
- Views: 70623
Re: Rules examples
any chance to use something like this?
to compare PN532 tags?
to compare PN532 tags?
Code: Select all
on pn532#tag do
if [pn532#tag]="4034998235" // correct tag
gpio,15,1 //green led - ok
timerSet,1,1
else
gpio,13,1 //red led - stop
timerSet,1,1
endif
endon
on Rules#timer=1 do
gpio,15,0
gpio,13,0
endon
- 07 Apr 2016, 22:24
- Forum: RFLink: Unsupported devices
- Topic: Solved: Livolo Switch
- Replies: 8
- Views: 9212
Re: Livolo Switch - Fixed
Hello,
but i only got remote wall switch , which is receiver only. I don't have any livolo sender remote. ;(
but i only got remote wall switch , which is receiver only. I don't have any livolo sender remote. ;(
- 07 Apr 2016, 20:39
- Forum: RFLink: Unsupported devices
- Topic: Solved: Livolo Switch
- Replies: 8
- Views: 9212
Re: Livolo Switch - Fixed
helo, are you using domoticz with livolo? I can't get it working correctly, create manual switch, choice name, gw rflink, and switch type ON/OFF, type: LIVOLO, and adress 00:00. it is not sending any commands.. i tried change adress to e.g. e2:00 it is working, but "bulb" in domoticz is al...
- 07 Apr 2016, 19:47
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 190866
Re: H801 : RGB controller based on ESP8266 avalaible from China
this would be great functionality....
btw: i'm on espeasy V94, with these settings:
ESP Chip ID: 137877
Flash Chip ID: 1327328
Flash Size: 1024 kB
Free Mem: 25664
and compiled with ide 1.6.5 with these:
btw: i'm on espeasy V94, with these settings:
ESP Chip ID: 137877
Flash Chip ID: 1327328
Flash Size: 1024 kB
Free Mem: 25664
and compiled with ide 1.6.5 with these:
- 07 Apr 2016, 16:16
- Forum: ESP Easy: Hardware
- Topic: H801 : RGB controller based on ESP8266 avalaible from China
- Replies: 134
- Views: 190866
Re: H801 : RGB controller based on ESP8266 avalaible from China
for me this pluging working OK. try connections if they are OK. what I'm missing here, H801 with espeasy and your plugin, connected to DOMOTICZ, in domoticz i setup MIIlight hardware with RGBW, but i'm not able to utilize WHITE LEDS, always it is just RGB mixture of collors. If I switch to RGB in do...
- 03 Apr 2016, 15:15
- Forum: ESP Easy: General Discussion
- Topic: OLED Scrolling Display
- Replies: 122
- Views: 176899
Re: OLED Scrolling Display
super. working now great...
- 03 Apr 2016, 11:37
- Forum: ESP Easy: General Discussion
- Topic: OLED Scrolling Display
- Replies: 122
- Views: 176899
Re: OLED Scrolling Display
hm, i got these errors when try to compile under ide 1.6.5 and esp2.1.0 core: added esp8266-oled-ssd1306 to local libs... _P205_FrameOLED.ino: In function 'boolean Plugin_205(byte, EventStruct*, String&)': _P205_FrameOLED.ino:375:46: error: 'string2Integer' was not declared in this scope _P205_F...
- 31 Mar 2016, 08:44
- Forum: ESP Easy: General Discussion
- Topic: MLX90614
- Replies: 18
- Views: 18033
Re: MLX90614
as @ger explained:
Port is used as offset for the default i2c address from the MLX90614 (5A)
If you use a standard MLX90614 you must use port 0.
Port is used as offset for the default i2c address from the MLX90614 (5A)
If you use a standard MLX90614 you must use port 0.
- 30 Mar 2016, 23:26
- Forum: ESP Easy: General Discussion
- Topic: MLX90614
- Replies: 18
- Views: 18033
Re: MLX90614
in TOOLS -> i2c scan (button) this will scan your i2c... if nothing there, you got problem with connection of MLX to ESP....
my screen looks like this...0x5a - no comment,but it is MLX...
my screen looks like this...0x5a - no comment,but it is MLX...
- 30 Mar 2016, 22:31
- Forum: ESP Easy: General Discussion
- Topic: MLX90614
- Replies: 18
- Views: 18033
Re: MLX90614
@ngc981
see my task for MLX... in PORT, use 0 instead of yours 80
my MLX sensor is on i2c address 0x5a
see my task for MLX... in PORT, use 0 instead of yours 80
my MLX sensor is on i2c address 0x5a
- 30 Mar 2016, 20:33
- Forum: ESP Easy: General Discussion
- Topic: MLX90614
- Replies: 18
- Views: 18033
Re: MLX90614
Hello, use port 0 and it will work...
- 30 Mar 2016, 15:35
- Forum: ESP Easy: General Discussion
- Topic: global sync
- Replies: 13
- Views: 13059
Re: global sync
great wiki, super working now! thank you.
- 29 Mar 2016, 23:50
- Forum: ESP Easy: General Discussion
- Topic: global sync
- Replies: 13
- Views: 13059
global sync
Hello I didn't found any info how to use global sync feature. any one to help?
i got 2 esp12, with ds18b20 and OLED. in tools->advances i checked GLOBAL SYNC, and in DEVICES in ds18b20 i also checked gloal sync. how can I display on another esp's these oled values?
thank you
i got 2 esp12, with ds18b20 and OLED. in tools->advances i checked GLOBAL SYNC, and in DEVICES in ds18b20 i also checked gloal sync. how can I display on another esp's these oled values?
thank you
- 22 Feb 2016, 20:43
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 718733
Re: New ESP gadget
I saw, that the LED got 3legs - so it is two state led, isn't it? not only green, but also red? can I use this second color with any other gpio?
i got sonoff w/o 433module
thank you
grz
i got sonoff w/o 433module
thank you
grz
- 21 Feb 2016, 21:48
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 718733
Re: New ESP gadget
Hello,
what kind of GPIO are on this SONOFF device? I think GPIO13 is relay, what is button? or LED? is led GREEN/RED? thank you....
grz
what kind of GPIO are on this SONOFF device? I think GPIO13 is relay, what is button? or LED? is led GREEN/RED? thank you....
grz