Let's Control It

QcVictor

You might need to delete the .pioenv folder prior to compile. tks for the tips Grovkillen, it's working, have a good weekend. Maybe another questions, I add the Plugin "_P133_VL53L0X.ino" in folder "src" add library required in the folder "lib" and start compilation, w...

QcVictor

Ok I give it a try to platformio but no luck

Code: Select all

collect2: error: ld returned 1 exit status
*** [.pioenvs/normal_ESP8266_4096/firmware.elf] Error 1

QcVictor

OK I understand but with further investigation, it's not related to this plugin, with the latest source and or last fork untouched I have the same error.

QcVictor

Hi Guys Try to compile from the latest sources the VL53L0X plugin from playground but get this error In file included from /Users/Pascal/Downloads/ESPEasy/ESPEasy.ino:76:0: sketch/ESPEasy-Globals.h:375:20: fatal error: I2Cdev.h: No such file or directory #include <I2Cdev.h> ^ compilation terminated....

QcVictor

Anyone play with this kind of sensor ? look interesting https://www.adafruit.com/product/3317

QcVictor

derpunkt wrote: ↑08 Feb 2018, 16:14 ok, now i understand.

You must download the mega-Release.
This is one entry below...

Release mega-20180206

Thank you so much derpunkt, I never see difference between mega and v2.xxx, but now ..... make sens

QcVictor

When I update the firmware in ota with the latest release from here https://github.com/letscontrolit/ESPEasy/releases the plugin as not been updated, the source show the older one

QcVictor

With the latest 20180206 and yes this one the P023_OLED.ino

QcVictor

Thanks for the plugin, why in the latest firmware update the plugin updated look like not merged <2018010.

QcVictor

Just discovered and tested this plugin, can we on/off or enable disable the plugin via http/domoticz ?

QcVictor

Tks Grovkillen, exactly what I was looking.

QcVictor

How I know the state of a relay ? I trig this relay from domoticz and want create a local rule based on this state relay...

QcVictor

Ok just got my stuff thk free shipping, so after wiring RX pin 19 I got something like this in RFLink loader 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48; 20;01;MySensors=OFF;NO NRF24L01; 20;02;setGPIO=ON; 10;version; 20;03;VER=1.1;REV=48;BUILD=04; 10;status; 20;04;STATUS;setRF433=ON;se...

QcVictor

Tks for the help grovkillen, GPIO are 12 and 5 for me..

QcVictor

QcVictor wrote: ↑18 Dec 2017, 20:28
Code: Select all
Just use the bin files and you're good.
Where is located this file I see nothing esp8285 ...

Ok My Bad I was looking for special firmware as my older dual, let me abuse, which GPIO is use for trigged the relays?

QcVictor

Code: Select all

Just use the bin files and you're good.

Where is located this file I see nothing esp8285 ...

QcVictor

Hi Guys
After succes flashing with both .bin found page 3 et above doesn't work for me with dual r2 (one with no fuse), the serial monitor work at 74880 and give me:

Code: Select all

ets Jan  8 2013,rst cause:1, boot mode:(3,5)

load 0x4010f000, len 1384, room 16 
tail 8
chksum 0xef
csum 0xef
csum err
ets_main.c

QcVictor

yeah, got it working just use this syntax and all good

Code: Select all

SendToHTTP 10.0.0.18,8080,/json.htm?param=udevice&type=command&idx=55&nvalue=1

QcVictor

found in the wiki rules turnaround where is said to use this syntax

Code: Select all

 SendToHTTP 10.0.0.0,8080,/json.htm?type=param=switchlight&command&idx=55&switchcmd=On

I tried but nothing update in domoticz and
unfortunately I just want update the status not toggle the switch

QcVictor

I have a strange character after "command" in the log and of course doesn't work

Code: Select all

15878769 : ACT : gpio,15,1
15878771 : SW : GPIO 15 Set to 1
15878776 : ACT : SendToHTTP 10.0.0.18:8080/json.htm?type=command¶m=udevice&idx=55&nvalue=0

QcVictor

Awsome it's working, many tks Grovkillen.
So where I put the request for update the status in domoticz? something like that

Code: Select all

SendToHTTP 10.0.0.18:8080/json.htm?type=command&param=udevice&idx=55&nvalue=1

QcVictor

tks Grovkillen for your help, rule doesn't work I should see in the log rule started ? 2180454 : WD : Uptime 36 ConnectFailures 0 FreeMem 22048 2185128 : SW : State 0 2185128 : EVENT: Button#Button=0.00 2186744 : SW : State 1 2186744 : EVENT: Button#Button=1.00 2198148 : SW : State 0 2198149 : EVENT...

QcVictor

I tried with this rules: on Button#Status=1 do if [Relay#Status]=0 gpio,15,0 else gpio,15,1 endif endon nothing work! Here's my setup: Device1 Device: Switch input Name: Relay Delay: 0 IDX/Var: 1 1st GPIO: GPIO-15 Pull UP: Yes Inversed: No Switch Type: Switch Switch Button Type: Normal Switch Send B...

QcVictor

Ok I attached Momentary Button and expect toggle between on/off switch relay, any clue for rules ?

QcVictor

Hi Guys I'use with success an relay with esp8266 + domoticz for controlling dry contact, I need to add a button locally like press physical button and relay change state without need network access, the best will be updated status in domoticz.... Not sure how to do that, if somebody as already exper...

QcVictor

HI Guys
Does he work with ESP Easy Mega ?

Code: Select all

Edit: Yes he works  :D , In the first post I can see reported 2 temperature in the plugin P039 only one is displayed How get the second value ?

QcVictor

Hi Guys
I'm looking for control my fireplace remotely with RFlink, I own an RFlink V1.1 in 433MHz unfortunately, Can I change Receivers and Transmitters for 315MHz and hoping he will work with the receiver Maxitrol G6R. If yes
Witch Transmitters will be suitable for the exchange ?
Regards, Vic

QcVictor

Hi Shardan
Always a pleasure to read your comment, thanks for the great explanation. If someone could add it too the wiki.
Regards
Vic

QcVictor

Hi Guys
With last build esp easy mega dev 10 normal

I'm unable to select port, new field "imput multiplexer" with dropdown list is there How he works ?

QcVictor

Tks Shardan for the quick reply, I "ll look for scripting in domoticz as you suggest, seems to be the easy way.

QcVictor

Hi Guys I'm looking for Record and display information coming from my Solid-state hour meters on my heating system, In order to accumulate elapsed time one relay is switched on and fall off when no activity. I successfully use switch input for get the signal but now I'm stuck now for made the conver...

QcVictor

Not sure if it's normal behaviour, but device send randomly state to domoticz
https://www.dropbox.com/s/5098z1n98fom9 ... .jpeg?dl=0

QcVictor

Ok, I got it working with "Switch input" device and "Yellow wire (OUT) Signal output" on GPIO.
My pool skimmer told you tks

QcVictor

Hi Guys I'm looking for hookup this device, He act : 1: Brown wire (VCC) Power +5V~24V (Power+) 2: Yellow wire (OUT) Signal output 3: Black wire (M) Output level (positive output or negative output) control When the black wire connect the high level, yellow wire is positive output signal wire, the o...

QcVictor

Hi Guys I would like control my fireplace trough the control wall switch plugged in parallel, look like simple on off button, acting like that: -Press ON-OFF button once to light pilot. Press again to shut of pilot. -Press and hold large flame Button to gradually increase flame height. -Press and ho...

QcVictor

Can I display distance from Ultrasonic Sensor - HC-SR04 ?

QcVictor

Hi Guys I plan to monitor my pool pressure filter with Wemos D1 Mini and this kind of transducer, http://www.banggood.com/Pressure-Transducer-Sensor-Oil-Fuel-Diesel-Gas-Water-Air-Sensor-p-1007341.html wiring look straight forward, Connect red to 5V, black to ground, yellow tout pin. Can't be much ea...

QcVictor

I have some trouble to compile _P103_Event.ino: In function 'void Plugin_103_Action(byte, byte, int, int, byte)': _P103_Event:522: error: invalid conversion from 'char*' to 'byte {aka unsigned char}' [-fpermissive] _P103_Event:522: error: too few arguments to function 'void ExecuteCommand(byte, cons...

QcVictor

Many thanks Costo, name in task settings was missing !

QcVictor

unable to get my temp and humidity from dht22 shield displayed, tried with H: [DHT#Humidity]% T: [DHT#Temperature] C and [Dallas#Temperature]

QcVictor

yes for sure, missing something ?

oups, I have to put on ! http://<ESP IP address>/control?cmd=oledcmd,on

the Screen Size is 64x48 and I'm unable to display temp and humidity, do I need to setup something in the skecht for this size of screen ?

QcVictor

I have Wemos D1mini + DTH22 + Oled Shield, temp/hum sensor work great, the oled shield display just an "easy" at startup, I'm on R78. any clue what happen?

QcVictor

Hi Guys
One of you could share the wiring and setting with the esp
tks in advance,

QcVictor

Many tks guys, never shown me the ESP_0 but after filling field with my network wifi credential and reflashing, it's working.

QcVictor

type "settings" in the serial, to check if you already got an IP, if not, there should be a new wifi ESP_0 to login to... do you did a cold restart (power off/on)? Type settings or any other command do nothing!, after each flash, I unplug -plug ! When I load NodeMCU firmware and load my w...

QcVictor

Hi Guys I meet similar issue with my 2 wemos d1 mini brand new, tried to upload firmware via IDE and also with the esaysetup when done, I'm unable to see the ESP_0 on my network wifi ! tried with latest R80 same behavior. Serial monitor give me: INIT : Booting Build nr:78 WIFI : Connecting... 1 WIFI...

Search found 46 matches