I have a working Shelly1 with fhem. All your ‘requirements’ are working for me. Important is a change to the ‘Switch-Input’. https://github.com/letscontrolit/ESPEasy/issues/2112 After Version mega 20181130 it is not working. May be they have put it back working. See the Relaese Notes aof the build. ...

I’m using Firmware R147_RC8. Measuring Temperature, Humidy, Controlling Relais and reading Switches with fhem. Working very good. But I have a simple problem: write a rule letting a LED blink with 1Hz. With PWM I can’t control the frequency. I tried this: On System#Boot do gpio,13,1 timerSet,1,1 end...

I have upgraded a 201 module with the winbond 25Q32.
It is working fine. But the Chip is bigger. You have to bend the legs.
I also have done it to use OTA.

Hi, I played also with some Dallas 1820 sensors. Wondered why I get strange numbers. And yes I also have different type: 1820, 18 B 20 May be it is possible to add the 1820. The 18S20 is the replacement for 1820. Both have different calculation of the temperature. The comparison to the 18B20: https:...

Hi, I'm using some 8266-201 module on the white development board. My current testing is with ESPEasy R78. If I do under Tools, Settings 'Save' and on another ESP module a 'Load' config.txt some fields are missing: - in Config 'Admin Passwort' (my be here wanted) - in Devies in the device 'System In...