Search found 3583 matches

by grovkillen
11 Jun 2017, 21:55
Forum: ESP Easy: Hardware
Topic: not able to program esp8266
Replies: 23
Views: 4973

Re: not able to program esp8266

danny08 wrote:
11 Jun 2017, 21:42
i connected rx to rx on the usb, tx to tx...
Big mistake. The RX stands for "receiver" and TX for "transmitter"... so you need to connect RX to TX! Otherwise you are transmitting to the transmitter.
by grovkillen
10 Jun 2017, 17:53
Forum: ESP Easy: Software
Topic: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem
Replies: 30
Views: 9351

Re: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem

I also posted this as a Rules Tuturial: https://www.letscontrolit.com/wiki/inde ... th_own_IDX

Not a fix, more like a workaround and good to know if you want to make your own custom publishing to Domoticz.
by grovkillen
09 Jun 2017, 19:44
Forum: ESP Easy: Software
Topic: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem
Replies: 30
Views: 9351

Re: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem

It's not a solution, but a workable workaround. Syntax would be something like this: MQTT on INA219#Amps do Publish domoticz/in,{"idx":123456,"nvalue":0,"svalue":"[INA219#Amps]"} endon on INA219#Watts do Publish domoticz/in,{"idx":654321,"nvalue":0,"svalue":"[INA219#Watts]"} endon HTTP on INA219#Amp...
by grovkillen
09 Jun 2017, 18:52
Forum: ESP Easy: Software
Topic: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem
Replies: 30
Views: 9351

Re: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem

Pietertje wrote:
09 Jun 2017, 18:47
Example:
2017-06-09 18:45:11.825 MQTT: Topic: domoticz/in, Message: {"idx":1,"nvalue":0,"svalue":"50"}
So then you could just have a rule that published some other idx value? That would also work.
by grovkillen
09 Jun 2017, 18:41
Forum: ESP Easy: Software
Topic: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem
Replies: 30
Views: 9351

Re: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem

Okay, but how does Domoticz get the IDX from the MQTT message?

Just curious, I don't use Domoticz myself.
by grovkillen
09 Jun 2017, 18:28
Forum: ESP Easy: Software
Topic: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem
Replies: 30
Views: 9351

Re: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem

But you can do it with MQTT I would expect?
by grovkillen
09 Jun 2017, 17:30
Forum: ESP Easy: Projects / Applications
Topic: Easp easy with buzzer?
Replies: 5
Views: 2837

Re: Easp easy with buzzer?

Sounds like a simple relay should work then?
by grovkillen
09 Jun 2017, 14:06
Forum: ESP Easy: Software
Topic: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem
Replies: 30
Views: 9351

Re: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem

I don't use Domoticz so I can't help you with that one.
by grovkillen
09 Jun 2017, 09:56
Forum: ESP Easy: Software
Topic: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem
Replies: 30
Views: 9351

Re: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem

With a home built dev_10, even the 2nd and 3rd elements of a value (such as volts) seem to be all over the place. i.e. In the 2nd element, I multipled the %value% by 10, and in the 3rd by 100. ...but the values don't make any sense and they appear to be purely random. There's a serious problem here...
by grovkillen
09 Jun 2017, 09:19
Forum: ESP Easy: Software
Topic: Own variables in Rules.
Replies: 3
Views: 1305

Re: Own variables in Rules.

Sorry, I cannot test but shouldn't you be able to use: on Dummy#Device do //If the Dummy variable is changed, trigger this rule if [Dummy#Device]=1 //Do what you want... endif if [Dummy#Device]=2 //Do what you want... endif if [Dummy#Device]=3 //Do what you want... endif //etc... endon
by grovkillen
09 Jun 2017, 09:14
Forum: ESP Easy: Software
Topic: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem
Replies: 30
Views: 9351

Re: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem

Is this based upon the dev10 source code from here https://github.com/letscontrolit/ESPEasy/tree/v2.0.0-dev10 (which doesn't yet have any downloadable binaries built from it) or have I missed a dev11 branch somwehere? Sorry for confusing you. It is a compilation of source codes as of 2 days ago. It...
by grovkillen
09 Jun 2017, 06:40
Forum: ESP Easy: Software
Topic: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem
Replies: 30
Views: 9351

Re: Release v2.0.0-dev10 - Bug? INA219 I2C 0x45 problem

Sorry guys, but it's a real shame that this problem persists. Guess I'll have to wait for a while until someone comes up with a fix. ...assuming anyones actually reading this. No need for that. We do read. Regarding the problem I have a friend that uses the dev10 together with 1 INA219 to monitor a...
by grovkillen
08 Jun 2017, 18:06
Forum: ESP Easy: Software
Topic: Own variables in Rules.
Replies: 3
Views: 1305

Re: Own variables in Rules.

You may use a dummy device. Please study the Dew Point example:

https://www.letscontrolit.com/wiki/inde ... example.29
by grovkillen
06 Jun 2017, 13:46
Forum: ESP Easy: Software
Topic: Deep Sleep delay issue
Replies: 18
Views: 5704

Re: Deep Sleep delay issue

this would be possible via rtc memory. such a wakeup would also take very little time. this can be a post 2.0.0 feature. also you can just wakeup the esp manually by setting deepsleep to 0 and pulling RST to gnd to wake it up. Great news! Glad to have been of some kind of help. :) Yeah we could eve...
by grovkillen
05 Jun 2017, 21:48
Forum: Experimental
Topic: ESP Easy Mega
Replies: 249
Views: 140215

Re: ESP Easy Mega

Jotoc wrote:
05 Jun 2017, 21:38
Hello all,

i miss the Checkbox "Send to Controller" for the Device Ina219.
Is this planned?

Greetings
Jotoc
It's been reported.

https://github.com/letscontrolit/ESPEasy/issues/321
by grovkillen
05 Jun 2017, 19:16
Forum: ESP Easy: Software
Topic: Deep Sleep delay issue
Replies: 18
Views: 5704

Re: Deep Sleep delay issue

Wouldn't it be possible if we had a dump variable that let you use Deep Sleep Delay X seconds (maximum 4294) and let the ESP wake up after y number of Deep Sleep Delay Cycles. If deep sleep delay is 3600 seconds and deep sleep delay cycle is 24 then the wake up would happen once every 24 hours? Jus...
by grovkillen
05 Jun 2017, 16:47
Forum: ESP Easy: Software
Topic: Deep Sleep delay issue
Replies: 18
Views: 5704

Re: Deep Sleep delay issue

Wouldn't it be possible if we had a dump variable that let you use Deep Sleep Delay X seconds (maximum 4294) and let the ESP wake up after y number of Deep Sleep Delay Cycles. If deep sleep delay is 3600 seconds and deep sleep delay cycle is 24 then the wake up would happen once every 24 hours? Just...
by grovkillen
05 Jun 2017, 10:18
Forum: ESP Easy: Hardware
Topic: Two way micro swith
Replies: 2
Views: 877

Re: Two way micro swith

I found them when using the search term "Reset Swing Switch". I hope this help someone else...

https://www.aliexpress.com/wholesale?ca ... ing+switch
by grovkillen
05 Jun 2017, 10:06
Forum: ESP Easy: Hardware
Topic: Two way micro swith
Replies: 2
Views: 877

Two way micro swith

I have salvaged some micro switches from two cd-rom-players. I think they are super smart in their simplicity. But when trying to find any to buy online I come up short. I can only find big CNC limit switches that use the same principle. Can someone shed some light and maybe point me in the right di...
by grovkillen
05 Jun 2017, 09:01
Forum: ESP Easy: General Discussion
Topic: Wiki main responsible (admin)?
Replies: 11
Views: 3117

Re: Wiki main responsible (admin)?

... Would it be possible to add "TXT" and "DAT" file formats since we would like to have template Rules (and maybe Settings) to be downloaded from the Wiki? Maybe even "BIN" files for the future? And I'd like to have our code examples even more expressive using code highlighting: https://www.mediaw...
by grovkillen
04 Jun 2017, 16:16
Forum: ESP Easy: Software
Topic: Deep Sleep delay issue
Replies: 18
Views: 5704

Re: Deep Sleep delay issue

yellowsky wrote:
04 Jun 2017, 13:14
Maybe put this information in the wiki.
Done.

https://www.letscontrolit.com/wiki/index.php/SleepMode
by grovkillen
04 Jun 2017, 07:28
Forum: ESP Easy: General Discussion
Topic: Wiki main responsible (admin)?
Replies: 11
Views: 3117

Re: Wiki main responsible (admin)?

I added some "extra information" but other than that all the information regarding thingspeak was there already.

https://www.letscontrolit.com/wiki/inde ... ThingSpeak
by grovkillen
02 Jun 2017, 15:20
Forum: ESP Easy: Software
Topic: ADS1115 with dev 10 no port
Replies: 8
Views: 2578

Re: ADS1115 with dev 10 no port

AndrewJ wrote:
02 Jun 2017, 14:25
Nice! Thanks guys, I really like the way these new Wiki sections are shaping up. As a relative newbie, learning as I go, it will make using the full range of ESPEasy capabilities so much easier! :D
AndrewJ
Nice words, makes my day to hear that ! :)
by grovkillen
02 Jun 2017, 13:12
Forum: ESP Easy: Software
Topic: ADS1115 with dev 10 no port
Replies: 8
Views: 2578

Re: ADS1115 with dev 10 no port

Shardan wrote:
01 Jun 2017, 23:15
...
I added some information to the wiki, regarding the two point calibration I didn't know exactly how it is planed to work so I will (or the dev) add more information to that section later.
Wiki: ADS1115
by grovkillen
30 May 2017, 22:27
Forum: Staff Announcements forum
Topic: ESP Easy development status
Replies: 143
Views: 66604

Re: ESP Easy development status

+1 for that. Just fix the issues relating none working features. We need all the things working at R120 to still work for 2.0.0.
by grovkillen
30 May 2017, 14:52
Forum: ESP Easy: General Discussion
Topic: Wiki main responsible (admin)?
Replies: 11
Views: 3117

Re: Wiki main responsible (admin)?

Glad you enjoyed it :)
by grovkillen
29 May 2017, 21:23
Forum: Experimental
Topic: The Rig
Replies: 33
Views: 14978

Re: The Rig

Martinus, I'd love to get some behind the scene story of how it began and what not. I would like to have a history section in the wiki :)
by grovkillen
29 May 2017, 21:20
Forum: ESP Easy: General Discussion
Topic: Wiki main responsible (admin)?
Replies: 11
Views: 3117

Re: Wiki main responsible (admin)?

Martinus wrote:
29 May 2017, 20:26
...
So this is what I needed it for: https://www.letscontrolit.com/wiki/inde ... late_Files
by grovkillen
29 May 2017, 20:34
Forum: ESP Easy: General Discussion
Topic: Wiki main responsible (admin)?
Replies: 11
Views: 3117

Re: Wiki main responsible (admin)?

Ah! Great ! :)

Thanks for the support.
by grovkillen
29 May 2017, 19:43
Forum: ESP Easy: Software
Topic: Disable blue LED
Replies: 6
Views: 3080

Re: Disable blue LED

Remove the diode?
by grovkillen
29 May 2017, 10:00
Forum: ESP Easy: General Discussion
Topic: Wiki main responsible (admin)?
Replies: 11
Views: 3117

Wiki main responsible (admin)?

Hi,

Who is the main admin for the wiki? I'd like to add more file types to upload (PDF in particular).

https://www.mediawiki.org/wiki/Manual:C ... le_uploads
by grovkillen
29 May 2017, 09:47
Forum: ESP Easy: General Discussion
Topic: backup rules?
Replies: 15
Views: 2911

Re: backup rules?

by grovkillen
29 May 2017, 06:15
Forum: ESP Easy: General Discussion
Topic: configure espeasy settings through http url
Replies: 13
Views: 4130

Re: configure espeasy settings through http url

those serial commands are easy to implement. can you create a feature request for it? also we already have a windows flasher gui. maybe you extent it and make a pull request. sources should be somewhere i think. #317 started. Didn't find the source for the new GUI. But I plan to do mine anyhow, for...
by grovkillen
28 May 2017, 18:08
Forum: ESP Easy: General Discussion
Topic: configure espeasy settings through http url
Replies: 13
Views: 4130

Re: configure espeasy settings through http url

I plan to make a Windows GUI for the flasher so I thought it'd be a great way of doing this automatically (no problem creating new txt files on the fly). +1 for that But as long as the commands are not implemented there's no way. Regards Shardan I hope we get that possibility in the future. It woul...
by grovkillen
28 May 2017, 17:50
Forum: ESP Easy: General Discussion
Topic: configure espeasy settings through http url
Replies: 13
Views: 4130

Re: configure espeasy settings through http url

... Anyways - you have to edit the .txt file on linux and windows for every setting of a new device so the web gui might be easier :) Regards Shardan I plan to make a Windows GUI for the flasher so I thought it'd be a great way of doing this automatically (no problem creating new txt files on the f...
by grovkillen
28 May 2017, 17:02
Forum: ESP Easy: General Discussion
Topic: configure espeasy settings through http url
Replies: 13
Views: 4130

Re: configure espeasy settings through http url

Is it possible to set UnitName and UnitNumber the same way?

Great solution by the way! :o :D
by grovkillen
28 May 2017, 16:48
Forum: Experimental
Topic: The Rig
Replies: 33
Views: 14978

Re: The Rig

Great idea and great use of the financial support. I hope the funding get through soon. ;)
by grovkillen
27 May 2017, 14:59
Forum: ESP Easy: Software
Topic: Precision of distance sensor (hc-sr04)
Replies: 3
Views: 1432

Re: Precision of distance sensor (hc-sr04)

I can confirm this. This plugin should be redesigned to let the user set the rounding.

This is now added as an issue.
by grovkillen
26 May 2017, 20:02
Forum: ESP Easy: Software
Topic: Precision of distance sensor (hc-sr04)
Replies: 3
Views: 1432

Re: Precision of distance sensor (hc-sr04)

Please publish a screen shoot of your device settings page.
by grovkillen
25 May 2017, 13:31
Forum: ESP Easy: General Discussion
Topic: SendToHTTP not working
Replies: 4
Views: 1652

Re: SendToHTTP not working

Thanks! Fixed the Wiki.
by grovkillen
24 May 2017, 09:31
Forum: ESP Easy: General Discussion
Topic: backup rules?
Replies: 15
Views: 2911

Re: backup rules?

Just download the pre-compiled file (found in the zip-file) from the GitHub. You'll find the link here.
by grovkillen
24 May 2017, 08:44
Forum: ESP Easy: General Discussion
Topic: backup rules?
Replies: 15
Views: 2911

Re: backup rules?

manjh wrote:
24 May 2017, 08:41
OK... which is still WIP, right? Is it stable enough for my regular ESP nodes, or should I stay away for now?
I've used if for all my nodes with no real issues. But if you have really "life dependent" systems running I would try it out on a lab node first. (I'm on the 2.0.0-dev7 version).
by grovkillen
24 May 2017, 08:35
Forum: ESP Easy: General Discussion
Topic: backup rules?
Replies: 15
Views: 2911

Re: backup rules?

Aha, you need the latest and greatest 2.0+.
by grovkillen
24 May 2017, 08:25
Forum: ESP Easy: General Discussion
Topic: backup rules?
Replies: 15
Views: 2911

Re: backup rules?

BIG MISTAKE! Remove the "/filelist" for direct download. Sorry!

<espeasyip>/config.dat
<espeasyip>/rules1.txt
<espeasyip>/rules2.txt
..
by grovkillen
24 May 2017, 08:23
Forum: ESP Easy: General Discussion
Topic: backup rules?
Replies: 15
Views: 2911

Re: backup rules?

What FW version is the node on?
by grovkillen
24 May 2017, 08:02
Forum: ESP Easy: General Discussion
Topic: backup rules?
Replies: 15
Views: 2911

Re: backup rules?

I know it is not what you're asking for (and I have personally opened up the idea of integrating the rules in to the settings file here ). BUT, as a workaround I use these URLs to automatically download my backups from my nodes (based on the upcoming 2.0+): <espeasyip>/filelist/config.dat <espeasyip...
by grovkillen
19 May 2017, 09:34
Forum: ESP Easy: Hardware
Topic: OLED 2.42"
Replies: 16
Views: 12099

Re: OLED 2.42"

You have to prepare the board before it will work: Remove R17 and place it on position of R15 Solder a short or 0 ohm on position R13 Solder a short or 0 ohm on position R18 or connect the CS pin to ground Connect the OLED display to the ESP with Gnd, 3.3V, SCL and SDA also connect the RES pin of t...