Search found 160 matches

by kimot
21 Aug 2019, 19:36
Forum: ESP Easy: Hardware
Topic: Serial Communikation Arduino ->espeasy
Replies: 6
Views: 1331

Re: Serial Communikation Arduino ->espeasy

But do not forgot, that Arduino Mega has got 5v TX, RX and ESP 3.3V
by kimot
21 Aug 2019, 19:25
Forum: ESP Easy: General Discussion
Topic: Getting Started with Sonoff 4CH V2.0
Replies: 2
Views: 905

Re: Getting Started with Sonoff 4CH V2.0

PSF-A is ESP8285 - use firmware for this version

https://www.itead.cc/wiki/PSF-A85

Putting board to download mode - look at 1:16 here:

https://www.youtube.com/watch?v=QlJq7XzctTg

I recommend esptool for flashing ESPeasy .bin file.
by kimot
01 Aug 2019, 22:44
Forum: ESP Easy: General Discussion
Topic: Problem with Wemos D1 pro mini
Replies: 33
Views: 2596

Re: Problem with Wemos D1 pro mini

I think, you must do something wrong. Fresh flashed ESPeasy does not requires any password for first connection and configuration IP address, Try python esptool for flashing .bin file. My way ( for Linux OS - in win change ttyUSB0 to COM port ): To retrieve the characteristics of the card, run the c...
by kimot
16 Jul 2019, 17:26
Forum: ESP Easy: General Discussion
Topic: Finding the time.
Replies: 6
Views: 2086

Re: Finding the time.

"DST Settings"

Next after "NTP setting"
by kimot
11 Jul 2019, 20:30
Forum: ESP Easy: Software
Topic: Serial data from arduino uno to espeasy
Replies: 7
Views: 2450

Re: Serial data from arduino uno to espeasy

You do not need Ser2net for sending data from Arduino to ESPeasy.
Simply send command via serial line.

Third line in tab here:
https://www.letscontrolit.com/wiki/inde ... _Reference

Search this forum - I remember it was solved here somewhere.
by kimot
02 Jul 2019, 20:46
Forum: ESP Easy: Hardware
Topic: SONOFF MINI
Replies: 3
Views: 4869

Re: SONOFF MINI

Look for Shelly1 or Shelly2 ( Shelly2.5 ).
The same function, the same size, but TX, RX and others on connestors - no soldering.
And ESP with 4M memory on board.

http://shelly.cloud
by kimot
02 Jul 2019, 20:14
Forum: ESP Easy: Projects / Applications
Topic: Solved! Since update endless feedback loop of a switching command between ESP EASY and Domoticz
Replies: 6
Views: 3180

Re: Since update endless feedback loop of a switching command between ESP EASY and Domoticz

Disable "send to controller" In Domoticz On / Off action use your pcfgpio commands. And in your rules send json htttp command about switch state to Domoticz. Then if you switch from Domoticz - it sets gpio and do not send back to Domoticz. If you set switch by rules in ESPeasy- it sets gpio, send st...
by kimot
23 Jun 2019, 16:01
Forum: ESP Easy: Hardware
Topic: Manually entered address for 1-Wire device (DS18B20)
Replies: 3
Views: 3777

Re: Manually entered address for 1-Wire device (DS18B20)

Connect one sensorr on the bus and set its address in device tab.
Then connect other and again set this device.
After that, put all of them on the bus together.
by kimot
05 Jun 2019, 19:36
Forum: ESP Easy: Software
Topic: GPIO problem with deep sleep
Replies: 6
Views: 5090

Re: GPIO problem with deep sleep

Wemos D1 + power bank 2500mAh ( about 7 days working time )
Data are send every 5 min to Domoticz.
If I forgot recharge battery, Domoticz sends me email ( and SMS notification ) after 15 min without incoming data from sensor.
by kimot
05 Jun 2019, 19:18
Forum: ESP Easy: Hardware
Topic: Broken I2C bus.
Replies: 7
Views: 4929

Re: Broken I2C bus.

ESP8266 do not have i2c bus.
It is sw emulated.
So try different pins or check possibly conflicts (TX,RX - disable serial port etc.)
by kimot
29 May 2019, 21:20
Forum: ESP Easy: Software
Topic: GPIO problem with deep sleep
Replies: 6
Views: 5090

Re: GPIO problem with deep sleep

I am using this sensor too with deepsleep and no "heating" on my board. It is placed along previously used DS18B20 and both temperatures are almost identical. And I suppose, that BME280 plugin switch this circuit to power save mode between measurements. But if not, 3.6 μA working current is not capa...
by kimot
01 May 2019, 20:04
Forum: ESP Easy: Projects / Applications
Topic: water level with ultrasonic distance meter - error readings
Replies: 15
Views: 1470

Re: water level with ultrasonic distance meter - error readings

It looks like software problem with your code. I am using HC-SR04 without any problem reading water surface. My measuring range is 110 cm = empty tank, 2 cm = full tank. ( this is now ). Only problem I have got - when it is raining, some water drops condenses on sensor at night. Or I need better cov...
by kimot
28 Apr 2019, 21:55
Forum: ESP Easy: Software
Topic: rules - example not working - error
Replies: 29
Views: 1270

Re: rules - example not working -

Try different version of ESPeasy.
It seems, you are using some "mega" version.
I recommend last v2.0 versions.

My simple if statements, which works with v2.0 do not works with mega version.
by kimot
23 Apr 2019, 19:09
Forum: ESP Easy: Hardware
Topic: Sonoff Classic - works with USB not 230V
Replies: 2
Views: 234

Re: Sonoff Classic - works with USB not 230V

And what is Sonoff Classic ??
Maybe you connect mains to output, not input.
Bad soldered input terminals.
Measure 3.3V on programming pins with mains connected.
Or if you test with USB on your table and with power line Sonoff laying on floor, it can be issue too.
by kimot
23 Apr 2019, 18:55
Forum: ESP Easy: General Discussion
Topic: Outgoing TCP (Telnet) connection via UART?
Replies: 4
Views: 407

Re: Outgoing TCP (Telnet) connection via UART?

I do not exactly know what you mean (telnet ).
But you can send event through serial line and with rules send UDP command to other ESPEASY.
by kimot
22 Apr 2019, 21:21
Forum: ESP Easy: Projects / Applications
Topic: Direct connection between two ESPEASY modules?
Replies: 6
Views: 2198

Re: Direct connection between two ESPEASY modules?

But you still need wifi accespoint.
That was question of previous post.
ESP-NOW is solution for this.
by kimot
19 Apr 2019, 20:16
Forum: ESP Easy: Hardware
Topic: Reboot cause: WEMOS D1 (clone) voltage regulator ??
Replies: 10
Views: 1163

Re: Reboot cause: WEMOS D1 (clone) voltage regulator ??

ESPEASY randomly reboots. It is the fact and must be sw problem. I have got about six wemos D1 with ESPEASY ( Rxxx, v2.0 and mega releases tested ). Two DS18B20 and relay ( Wemos module relay board ). All reboots randomly. The same Wemos works like ethernet gateway for MySensors network - RFM69 radi...
by kimot
17 Apr 2019, 20:32
Forum: ESP Easy: Software
Topic: What can users do to make ESPEasy more attractive.
Replies: 13
Views: 965

Re: OTA updates on 1MB devices

@grovkillen I think, you need some stable relase. And I do not mean old and slow Rxxx relases. Each mega brings something new, but looses something different, what works fine before. I found some latest v2.0 version, which is compromise for me. Then are still changes And what works fine, for example...
by kimot
14 Apr 2019, 22:24
Forum: ESP Easy: General Discussion
Topic: How to wake from deep sleep
Replies: 2
Views: 444

Re: How to wake from deep sleep

When postman put something to your box you must generate short ground pulse on reset pin to boot your ESP.
by kimot
04 Apr 2019, 20:51
Forum: ESP Easy: General Discussion
Topic: lcd2004 with big fonts option available?
Replies: 2
Views: 349

Re: lcd2004 with big fonts option available?

LCD2004 is character oriented display. Each character is 8x5 dots with space between characters and lines too. Characters are stored in displays ROM and called by ASCII code. But you can define 8 characters by own and stored then in displays RAM. So you can create something like this: DSC_0533.jpg Y...
by kimot
28 Mar 2019, 09:54
Forum: ESP Easy: Projects / Applications
Topic: Relay
Replies: 8
Views: 757

Re: Relay

Do you realize that the event relay#rele is only executed when the relay status changes? How do you do that? In some other part of the program? If not, this event will never happen and cannot work.
by kimot
26 Mar 2019, 19:58
Forum: ESP Easy: Projects / Applications
Topic: Relay
Replies: 8
Views: 757

Re: Relay

Nice, but still -what is relay#rele ? I can see only rele#rele in your last picture. And on new firmwares, checking relay status by defining input on the same pin is problematic. I am using it, but on older versions _dev13 and v2.0 And you are using event: When toggle relay (change its status - but ...
by kimot
26 Mar 2019, 19:50
Forum: ESP Easy: General Discussion
Topic: Sonoff Basic and latest versions of ESP firmware
Replies: 6
Views: 619

Re: Sonoff Basic and latest versions of ESP firmware

My Sonoff Basic:
2019-03-26-194435_1920x1080_scrot.png
2019-03-26-194435_1920x1080_scrot.png (101.79 KiB) Viewed 550 times
I think message " ESP_Easy_0, connected, no internet" is correct.

ESPeasy is in AP mode ( and without internet connection of course )

You must connect to it ( 192.168.4.1 ) and set your wifi network SSID and password.
by kimot
20 Mar 2019, 23:19
Forum: ESP Easy: Software
Topic: Rules not working and "how to send data to 3rd party"
Replies: 7
Views: 892

Re: Rules not working and "how to send data to 3rd party"

Authorization When using some method other than a browser to connect to Domoticz it may be necessary to do Authorization differently. Authorization over HTTP is done by setting the "Authorization" HTTP request header when sending the request to Domoticz. The value of this header is a base64 encoded ...
by kimot
20 Mar 2019, 23:15
Forum: ESP Easy: Software
Topic: Rules not working and "how to send data to 3rd party"
Replies: 7
Views: 892

Re: Rules not working and "how to send data to 3rd party"

I am using password for Domoticz for connections from outside Internet ( WLAN ). But setting it to no required password from my local network. ( LAN ) And what problem is with airsensor? I think /json.htm?type=command¶m=udevice&idx=IDX&nvalue=[ your_dummy_variable_for PPM ] Must work. ( I check ...
by kimot
17 Mar 2019, 20:45
Forum: ESP Easy: General Discussion
Topic: Interacting with Domoticz
Replies: 2
Views: 446

Re: Interacting with Domoticz

Create dummy switch in Domoticz and take note about its IDX In rules on ESPeasy use something like this: SendToHTTP 192.168.1.253,8080,/json.htm?type=command¶m=switchlight&idx=26&switchcmd=On or SendToHTTP 192.168.1.253,8080,/json.htm?type=command¶m=switchlight&idx=26&switchcmd=Off Here IDX ...
by kimot
16 Mar 2019, 10:05
Forum: ESP Easy: General Discussion
Topic: TIMEout while reading input data!
Replies: 3
Views: 289

Re: TIMEout while reading input data!

Try this: Instead of syntax like this: SendToHTTP 192.168.0.243,8080,/json.htm?type=command¶m=switchlight&idx=174&switchcmd=On Many users have reported problems with commands being truncated, particularly when trying to send commands to Domoticz. It seems to be a parsing error. There is the foll...
by kimot
15 Mar 2019, 23:12
Forum: ESP Easy: General Discussion
Topic: Rules on mega version problem
Replies: 3
Views: 393

Re: Rules on mega version problem

I remove it, but result is the same.
I think - it is very simple rules and I do not understand why it not works on mega version.
by kimot
14 Mar 2019, 22:17
Forum: ESP Easy: General Discussion
Topic: Rules on mega version problem
Replies: 3
Views: 393

Rules on mega version problem

Can somebody check my rules, which not works on mega version firmware please. I am normally using v2.0 version firmware for my floor heating controller. Rules have got about 1900 characters and all works fine. If I try new mega versions no "if" statements works. I "strip" down this rules for testing...
by kimot
14 Mar 2019, 14:17
Forum: ESP Easy: Projects / Applications
Topic: ESP Pulse counter and wrong values in Domoticz
Replies: 1
Views: 462

Re: ESP Pulse counter and wrong values in Domoticz

Domoticz has got some problems counting energy consumption. My first sensor version sends actual watts to Domoticz and lets Domoticz calculate energy consumption. But Domoticz always forgot last 5 min in hour interval. Now I am using universal counter incremental in Domoticz and send every minute ac...
by kimot
09 Mar 2019, 19:51
Forum: ESP Easy: General Discussion
Topic: Problem store rules on last mega version
Replies: 5
Views: 437

Re: Problem store rules on last mega version

Sorry, I left it marked "private".
Now corrected and link works.
by kimot
09 Mar 2019, 18:08
Forum: ESP Easy: General Discussion
Topic: Problem store rules on last mega version
Replies: 5
Views: 437

Problem store rules on last mega version

I use the latest version of V2.0, but from time to time I'm trying to check if my rules will work on the current version of the mega firmware. Unfortunately, what works correctly on v2.0 does not work on the mega version. Today, however, I have found that I can not even save the rules from my versio...
by kimot
08 Mar 2019, 09:56
Forum: ESP Easy: General Discussion
Topic: Problems with event call in rules ?
Replies: 5
Views: 534

Re: Problems with event call in rules ?

What is:

DoAction=25

And I am not sure, if your event call method is correct:
Calling event with value assigned.

event DoDown=%eventvalue%
by kimot
07 Mar 2019, 17:55
Forum: ESP Easy: Hardware
Topic: Can't flash my POW R2
Replies: 3
Views: 330

Re: Can't flash my POW R2

by kimot
04 Mar 2019, 10:56
Forum: ESP Easy: Projects / Applications
Topic: ESPEasy on ShellyV1
Replies: 8
Views: 1180

Re: ESPEasy on ShellyV1

rele#Switch is defined as input for the same gpio like relay ( gpio12 ) So this switch reflect actual state of relay and can be checked by if statement. But I am using old v2.0-20180322 version. Maybe in some "mega" versions this feature not works. Something like this was mentioned in this forum for...
by kimot
03 Mar 2019, 22:35
Forum: ESP Easy: Hardware
Topic: Fingerprint sensor FPM10A with ESPeasy?
Replies: 1
Views: 307

Re: Fingerprint sensor FPM10A with ESPeasy?

Put Arduino between fingerprintsensor and ESPeasy. Arduino through available library decides whether the fingerprint is valid, and send event "valid" to ESPeasy. Or you can define events: carol_valid peter_valid linda_valid If you need distinguish users. You can simply send these command via serial ...
by kimot
03 Mar 2019, 22:30
Forum: ESP Easy: Hardware
Topic: Blitzwolf BW-SHP6
Replies: 9
Views: 4052

Re: Blitzwolf BW-SHP6

@Wiki You can use normal ESP8285 bin file. Configuration fot Blitz is described in TAsmota wiki: GPIO_LED2_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_LED1_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status GPIO_USER, // GPIO0...
by kimot
03 Mar 2019, 22:13
Forum: ESP Easy: Projects / Applications
Topic: ESPEasy on ShellyV1
Replies: 8
Views: 1180

Re: ESPEasy on ShellyV1

I do not know FHEM, I am using Domoticz. But You can create events "lamp_on" and lamp_off" which received from FHEM will switch relay. And back report relay state to FHEM: Some example with Domoticz: on lamp_on do // this event from Domoticz will switch relay ON gpio,12,1 gpio,13,0 endon on lamp_off...
by kimot
03 Mar 2019, 22:00
Forum: ESP Easy: General Discussion
Topic: MCP23017 question
Replies: 14
Views: 886

Re: MCP23017 question

You can use this motor PWM like DA converter for convert digi to analog via i2c:
https://www.letscontrolit.com/wiki/inde ... 2#Hardware

So by TB 6612
by kimot
28 Feb 2019, 22:25
Forum: ESP Easy: General Discussion
Topic: ESP Easy and Sonoff TH16 - crash every 2 days
Replies: 5
Views: 542

Re: ESP Easy and Sonoff TH16 - crash every 2 days

@aneo I am using them for el. floor heating too. I send actual setpoint value, mode of control, outdoor temperature and others every minute from Domoticz to all ESP regulators. ESP boot with some safe settings and within minute obtain correct values and works. I am now changing my Wemos nodes to Son...
by kimot
28 Feb 2019, 13:52
Forum: ESP Easy: General Discussion
Topic: ESP Easy and Sonoff TH16 - crash every 2 days
Replies: 5
Views: 542

Re: ESP Easy and Sonoff TH16 - crash every 2 days

My Wemos D1 with DS18B20 reboots randomly in hours or days interval too.
So I send configuration periodically from Domoticz, to set correct values after reboot.
_dev13 and v2.0 too.
I have number of them on one power bus and they reboot independently, so I think it is not power issue.
by kimot
26 Feb 2019, 12:04
Forum: ESP Easy: Software
Topic: How to read an IO pin state in rules ?
Replies: 4
Views: 460

Re: How to read an IO pin state in rules ?

You can assign input switch to your gpio12 and than tested its state.
Like at this example:
viewtopic.php?p=33716#p33716

But using events, like grovkillen wrote, is better way.
by kimot
24 Feb 2019, 13:11
Forum: ESP Easy: Projects / Applications
Topic: Seria Server - Ser2Net wiki?
Replies: 13
Views: 1268

Re: Seria Server - Ser2Net wiki?

Look here: https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference You can send command by serial line from Arduino to ESPeasy. Create dummy device in ESPeasy - for example like me in task 12: 2019-02-24-130221_1920x1080_scrot.png From arduino send string: TaskValueSet,12,1,<your_valu...
by kimot
12 Feb 2019, 21:10
Forum: ESP Easy: Software
Topic: Update button state from Node-Red
Replies: 10
Views: 1237

Re: Update button state from Node-Red

I think I'm using the same configuration just instead of MQTT using http and Domoticz. The original state was a switch in the wall. I replaced it by Sonoff Basic, which switches the lamp and the original switch is replaced by a button switch ( but you can use original switch ) connected to Gpio on t...