Search found 742 matches

by BertB
14 Apr 2018, 15:12
Forum: ESP Easy: Software
Topic: Slow with MQTT
Replies: 34
Views: 6108

Slow with MQTT

Hi, I have the latest stable on all my Wemos devices. They now tend to be somewhat slower ? But it is virtually impossible to get a connection to the web interface, while using MQTT. It also seems to loose the connection to MQTT Log 9910210 : IMPT : [MQTT1#Solar_a] subscribed to Solar/Actual 9910213...
by BertB
27 Mar 2018, 22:08
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

LisaM wrote:
27 Mar 2018, 20:01
Looks like a Domoticz bug... The values are there...
bme1.JPG

bme2.JPG
Probably not.
This is with the BME on a ESPEasy:
364 ESP16 141BC 1 BME1 Temp + Humidity + Baro THB1 - BTHR918, BTHGN129 22.0 C, 37 %, 1005 hPa

It looks like the string has a different format then.
by BertB
27 Mar 2018, 19:49
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Update: The Dallas show up correctly in Domoticz. The BME has two devices in Domoticz, one for temp and one for weather. Neither one sohwas values, but 'last seen' is correct. BME should be one device: 1244 VirtualSwitches 1452C 1 uPyEasy Test Temp_Hum_Baro Temp + Humidity + Baro THB1 - BTHR918, BT...
by BertB
26 Mar 2018, 23:34
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Update:
The Dallas show up correctly in Domoticz.
The BME has two devices in Domoticz, one for temp and one for weather.
Neither one sohwas values, but 'last seen' is correct.
by BertB
26 Mar 2018, 23:12
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

V0.2.2 released, firmware can be found in the release section. Issues solved: - Async ESP32 not working (work-around implemented: devices should be sending data to domoticz now) Features added: - Fixed IP Address possible for ESP32 yep, it works :D But there still is something funny going on. When ...
by BertB
25 Mar 2018, 21:41
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

What can I say. It looks good, but there are no updates.
Probable has something to do with beta testing ;-)
by BertB
25 Mar 2018, 18:34
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

What version is uploaded last? What time was that? Just installed a version, say 10 minutes back. It had the boot.py stuff on board :-) First created a BME280. That went fine. Then I wanted to create a DS18B20 and, right after the submit the browser told me that the connection got re inititialized. ...
by BertB
25 Mar 2018, 15:29
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Seems its running again, with the 4096 bin. But, it does not pass the data to Domoticz, using HTTP, nor does it auto update once every 60 seconds. After a manual update (by clicking Devices) I getnew values, as expected and this: stack: 2032 out of 15360 GC: total: 96000, used: 75856, free: 20144 No...
by BertB
25 Mar 2018, 14:23
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Happy to see this working, but it is yet another approach of getting started. :?
by BertB
25 Mar 2018, 11:51
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Ok, so use this command to flash the firmware: esptool.py --port YYYY write_flash --compress 0x1000 xxxx.bin where YYYY is your comport (unix: /dev/ttyUSBx, windows COMx) and xxxx is your firmware name. Don't specify any other parameters as stated earlier in these post in this topic, but follow the...
by BertB
24 Mar 2018, 20:26
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Now ... maybe of interest ... When I use this:D:\Program Files>python python\python36\esptool-master\esptool.py --port COM6 write_flash --compress 0x1000 D:\Tools\uPython\upyeasy-esp32\upyeasy_un4096.bin This is the kind of same command as in the very beginning of this item, page 1 I get this: ets J...
by BertB
24 Mar 2018, 20:20
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

This is with the 2048 bin ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:4364 load:0x40078000,len:0 load:0...
by BertB
24 Mar 2018, 18:45
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

I already did.
Both modules, from different makers, fail.
by BertB
24 Mar 2018, 17:14
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Hi Raptor Sorry to say, but nope: ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:4416 ho 0 tail 12 room 4 ...
by BertB
24 Mar 2018, 00:21
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

With the 4096 bin, I get the:
OSError: [Errno 5] EIO
OSError: [Errno 1] EPERM
OSError: [Errno 1] EPERM

errors.
by BertB
24 Mar 2018, 00:09
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

LisaM wrote:
23 Mar 2018, 21:32
AndrewJ wrote:
23 Mar 2018, 20:48
Make that three! :D
You and @bertb have devices that are not automatically updated and send to domoticz? Only the first, second or both?
I have two devices, neither one is updated.
by BertB
23 Mar 2018, 20:29
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

That makes two of us :-)
by BertB
23 Mar 2018, 19:41
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

having said that, There still is no automatic update of the devices and no value is written to Domoticz.
by BertB
23 Mar 2018, 18:49
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Great, it runs. But ... First I added the BME280. That went good. Znd then, when I ad a DS18B20 device, the interface looses connection and this is the trace: stack: 2032 out of 15360 GC: total: 96000, used: 90224, free: 5776 No. of 1-blocks: 1468, 2-blocks: 179, max blk sz: 902, max free sz: 360 57...
by BertB
23 Mar 2018, 17:10
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

This is the sequence with the 2048 bin. rst:0x1 (POWERON_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:4364 load:0x40078000,len:0 load:0x40078000,...
by BertB
22 Mar 2018, 23:14
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

I followed all the steps of Raptor, no success: rst:0x10 (RTCWDT_RTC_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:4364 load:0x40078000,len:0 load...
by BertB
21 Mar 2018, 22:38
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

It is also impossible to use ampy to upload main.py D:\Program Files\Python\Python36>ampy --port COM6 put D:\Tools\uPython\main.py Traceback (most recent call last): File "d:\program files\python\python36\lib\runpy.py", line 193, in _run_module_as_main "__main__", mod_spec) File "d:\program files\py...
by BertB
21 Mar 2018, 22:35
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

I am getting tired ... thanks.
Ehm, I tried both.
by BertB
21 Mar 2018, 22:15
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

It is not looping anymore. But now I get this: rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3fff0018,len:4 load:0x3fff001c,len:4364 load:0x40078000,len:0 load:0x40...
by BertB
20 Mar 2018, 20:18
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

I am coming closer ;-) btw. I have received an esp32 wrover module now and tried to test it I've tried this but it doesn't work: E:\esp32>esptool.py --chip esp32 --port COM7 --baud 460800 write_flash --flash_freq 40m --flash_mode dio -z 0x1000 upyeasy_v021_20180318_test_esp32_4096.bin can you pleas...
by BertB
18 Mar 2018, 21:58
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

With the 4M bin, I get this rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:2 load:0x3f400020,len:429368 ets Jun 8 2016 00:22:57 rst:0x10 (RTCWDT_RTC_RESET),boot:0x17 (SPI_FAS...
by BertB
18 Mar 2018, 17:45
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

On both boards, the first version of upyeasy works.
by BertB
18 Mar 2018, 17:31
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

I have these two: https://nl.aliexpress.com/item/Lolin-ESP32-wemos-ESP32-WiFi-Modules-Bluetooth-Dual-ESP-32-ESP-32S-ESP8266/32807483723.html?spm=a2g0s.9042311.0.0.0c92Eb and: https://nl.aliexpress.com/item/LOLIN32-Pro-V1-0-0-wifi-bluetooth-board-gebaseerd-ESP-32-esp32-Rev1-ESP32-WROVER-MicroPython/3...
by BertB
18 Mar 2018, 16:23
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

nd I have the same with a ESP-WROOM-32
by BertB
18 Mar 2018, 16:11
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

@LisaM This is all it does: On the ESP32: ESP32-WROVER FCC ID2AC7Z-ESP32WROVER rst:0x1 (POWERON_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT) flash read err, 1000 ets_main.c 371 ets Jun 8 2016 00:22:57 rst:0x10 (RTCWDT_RTC_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0...
by BertB
14 Mar 2018, 14:05
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

I have the same problem with this release.
by BertB
02 Mar 2018, 10:35
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 114416

Re: Nextion display plugin

TD-er wrote:
01 Mar 2018, 22:05
If you think it is workable, I can port it to the Mega branch, then more people can test it.
Yes, please do.
I work with the latest version for quite some time and I think it is quite stable.
by BertB
28 Feb 2018, 14:51
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 114416

Re: Nextion display plugin

I am trying to get it to the playground, but I just don't understand this process.
My current attempt seems to end up in all sorts of conflicts.
by BertB
24 Feb 2018, 18:56
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 114416

Re: Nextion display plugin

choxnox wrote:
29 Jan 2018, 08:52
Is this the latest version of the plugin?

https://github.com/letscontrolit/ESPEas ... extion.ino
I am sorry,
It is not the latest version. Somehow I cannot get it on the playground.
Just above, there is the newest one.
by BertB
24 Feb 2018, 16:43
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 114416

Re: Nextion display plugin

Where did you put the code in the Nextion button? It has to be in the Touch Release Event. Your Nextion#idx=261 This is the code in Rules: on Nextion#idx=230 do sendtohttp xxx.xxx.xxx.xxx,8080,/json.htm?param=udevice&type=command&idx=79&nvalue=0&svalue=[Nextion#value] endon xxx is to be replaced by ...
by BertB
14 Feb 2018, 12:09
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 114416

Re: Nextion display plugin

It realy looks great, but honestly ... Lua is too much for me :(
by BertB
04 Feb 2018, 00:39
Forum: uPyEasy: General Discussion
Topic: Blockly Events
Replies: 21
Views: 5383

Re: Blockly Events

Great Lisa ! Programming is soooo 1980 ;) Really? Looking back, my days in Assembler were the best.... Assembler? OMG! :shock: At work i've banned programming for about 80%! We make models and computers are generating most efficient application code for us (with certified quality and traceability)....
by BertB
03 Feb 2018, 13:00
Forum: uPyEasy: General Discussion
Topic: Blockly Events
Replies: 21
Views: 5383

Re: Blockly Events

Must say, I feel a bit disconnected too.
by BertB
02 Feb 2018, 10:05
Forum: uPyEasy: General Discussion
Topic: Blockly Events
Replies: 21
Views: 5383

Re: Blockly Events

@Lisa
What exactly do you mean with client/server here?
Doe the blockly made script reside in, let's say, Domoticz and control functions from there in a upyEasy of does the upyEasy download the script and run it locally?
by BertB
30 Jan 2018, 22:29
Forum: uPyEasy: General Discussion
Topic: uPyEasy BETA-1 is available!
Replies: 22
Views: 6050

Re: uPyEasy BETA-1 is available!

Knipsel.PNG
Knipsel.PNG (26.48 KiB) Viewed 3745 times
by BertB
30 Jan 2018, 20:15
Forum: uPyEasy: General Discussion
Topic: uPyEasy BETA-1 is available!
Replies: 22
Views: 6050

Re: uPyEasy BETA-1 is available!

Both bugs fixed and new firmware uploaded. Please log these bugs in github, in this thread i might lose track of them... The stack trace is helping me a lot to find these bugs! Houston, we have a go :D Deeply impressed too, I am. Works fine now, but it is very very very slooooooow. Lots of debug da...
by BertB
29 Jan 2018, 19:48
Forum: uPyEasy: General Discussion
Topic: uPyEasy BETA-1 is available!
Replies: 22
Views: 6050

Re: uPyEasy BETA-1 is available!

And the test plugin? It's a test plugin designed to always return 17 as value for testing purposes. 17 shows up in the devices list and it all seems to be ok, but then: stack: 2000 out of 15360 GC: total: 96000, used: 72224, free: 23776 No. of 1-blocks: 1200, 2-blocks: 153, max blk sz: 901, max fre...
by BertB
29 Jan 2018, 18:23
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 480
Views: 114416

Re: Nextion display plugin

Yes
by BertB
28 Jan 2018, 23:46
Forum: uPyEasy: General Discussion
Topic: uPyEasy BETA-1 is available!
Replies: 22
Views: 6050

Re: uPyEasy BETA-1 is available!

I am doing some tests here and notice that: response is very sluggish, especially while using the Hardware tab. In the devices tab, I cannot select the switch, nor the DS18B20. This is the fault I get: stack: 2000 out of 15360 GC: total: 96000, used: 77024, free: 18976 No. of 1-blocks: 1382, 2-block...
by BertB
28 Jan 2018, 18:53
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

yeah ... growing up hurts ... But, I had a esptool in the directory of Python36. And one in Lib/site-packages. When I run esptool from site-packages, there is no nagging about serial. So, I removed esptool from the home directory of Python. Now I have the following: D:\Program Files\Python\Python36>...
by BertB
28 Jan 2018, 18:46
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Solved it ... I got one esptool.py to many ...
:oops: :mrgreen:
by BertB
28 Jan 2018, 17:41
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Path set correctly?: I can start python from everywhere on the pc after issuing Path, I get a lot of stuff, including: D:\Program Files\Python\Python36\Scripts;D:\Program Files\Python\Python36 Python -V C:\Users\berbe>python -V Python 3.6.2 Esptool version?: esptool.py -h D:\Tools\uPython>esptool.p...
by BertB
28 Jan 2018, 16:46
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

Thanks, but i did that: D:\Program Files>cd python\python36 D:\Program Files\Python\Python36>esptool.py --port COM6 erase_flash Traceback (most recent call last): File "D:\Program Files\Python\Python36\esptool.py", line 34, in <module> import serial ImportError: No module named serial D:\Program Fil...
by BertB
28 Jan 2018, 16:17
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 54896

Re: ESP32 boards

I hate it when stuff does not work reliably. I think I followed all the steps in the books. I have Python36 and pip and ampy and pyserial. When I start pyton i get the >>> signs when I enter import serial, again I get >>> But when I enter esptool.py --port COM6 erase_flash in the shell, I get Traceb...