Search found 743 matches

by BertB
28 Jan 2018, 16:17
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

I hate it when stuff does not work reliably. I think I followed all the steps in the books. I have Python36 and pip and ampy and pyserial. When I start pyton i get the >>> signs when I enter import serial, again I get >>> But when I enter esptool.py --port COM6 erase_flash in the shell, I get Traceb...
by BertB
28 Jan 2018, 14:55
Forum: uPyEasy: General Discussion
Topic: Blockly Events
Replies: 21
Views: 8268

Re: Blockly Events

Well, it seems Rules no longer rulez.
No problem ... I have to go the python way anyway, but for getting things done quickly, Blockly is a nice alternative.

Having said that, one of the powerfull things in Rules is the handling of the output of the devices.
by BertB
28 Jan 2018, 14:49
Forum: uPyEasy: General Discussion
Topic: SSL support
Replies: 7
Views: 3900

Re: SSL support

I would say an option, but on by default.
by BertB
27 Jan 2018, 15:25
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 482
Views: 142895

Re: Nextion display plugin

It can even get better if you only enable Send Component ID in the Touch Release Event of a button. Let's assume that gives the code of 774 in the ESPEasy and in Domoticz you have a switch with idx 7. Then with Rule: on E16Nextion#code=774 do SendToHTTP <domoticz ip,8080>,/json.htm?type=command¶...
by BertB
27 Jan 2018, 12:08
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 482
Views: 142895

Re: Nextion display plugin

Hi Ernst, First of all, the code is not ready, it needs a some more attention, but I do not have much time to do it. Initially the code simply received the data to the outputs, like this: output 1 = pagenumber * 256 + itemnumber. Page = 1 (it starts with 0) and button id is 9, you get 256+9=265 outp...
by BertB
22 Jan 2018, 19:40
Forum: uPyEasy: General Discussion
Topic: uPyEasy
Replies: 132
Views: 61117

Re: uPyEasy

Yes, I think it is great.
by BertB
20 Jan 2018, 15:12
Forum: RFLink: Nederlands support forum
Topic: RFLINK hangt RPI?
Replies: 2
Views: 2257

Re: RFLINK hangt RPI?

Zou kunnen, maar ik heb al een hele nieuwe install gedaan, op een nieuw kaartje.
Ik zou het op een andere RPI 3 kunnen proberen.
by BertB
20 Jan 2018, 12:00
Forum: RFLink: Nederlands support forum
Topic: RFLINK hangt RPI?
Replies: 2
Views: 2257

RFLINK hangt RPI?

Ik heb een RPI3 met Domiticz met op de USB een AEOTEC Zwave stick en een RFLINK. Dat werkt eigenlijk altijd goed, maar doet Domoticz het niet meer. De rpi is via poort 22 (Putty) nog wel te benaderen. Als dit gebeurt, dan knippert het ledje op de Arduino van de RFLINK heel traag. misschien wel 10 se...
by BertB
20 Jan 2018, 11:35
Forum: ESP Easy: Software
Topic: Error with compiling of board WeMos d1 r2 mini
Replies: 5
Views: 2692

Re: Error with compiling of board WeMos d1 r2 mini

Thank you TD-er, but I started with 2.3.0 and I got similar errors. Therefore, after numerous trying and changing the lib location, I decided to go for 2.4.0. Without result, so I went back to 2.3.0 Tadaa, it compiled :? . This is what I call irratic behaviour. I do almost all updates OTA from the E...
by BertB
17 Jan 2018, 16:53
Forum: ESP Easy: Software
Topic: Error with compiling of board WeMos d1 r2 mini
Replies: 5
Views: 2692

Re: Error with compiling of board WeMos d1 r2 mini

I first compiled with 2.3.0, with the above result.
Then I migrated to 2.4.0, no real change
Then I reinstalled 2.3.0. and it compiles again.

Is there a way to get a binary out of Atom? That way I can avoid using Arduino IDE.
by BertB
17 Jan 2018, 16:35
Forum: ESP Easy: Software
Topic: Error with compiling of board WeMos d1 r2 mini
Replies: 5
Views: 2692

Error with compiling of board WeMos d1 r2 mini

ESPEasy_v2.0.0-dev12 IDE 2.4.0 Arduino: 1.8.3 (Windows 10), Board:"WeMos D1 R2 & mini, 80 MHz, 4M (1M SPIFFS), v2 Prebuilt (MSS=536), Disabled, None, 115200" WAARSCHUWING: Categorie 'LED' in bibliotheek CHT16K33 LED Matrix Library is niet geldig. Wordt gewijzigd naar 'Uncategorized' WAARSCHUWING: Ca...
by BertB
13 Jan 2018, 21:42
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

Knipsel.PNG
Knipsel.PNG (16.5 KiB) Viewed 9509 times
Knipsel2.PNG
Knipsel2.PNG (28.92 KiB) Viewed 9508 times
by BertB
13 Jan 2018, 15:57
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

This is getting better each time I look.
by BertB
13 Jan 2018, 15:31
Forum: ESP Easy: General Discussion
Topic: ESPEasy v2.0.0-dev13
Replies: 39
Views: 15046

Re: ESPEasy v2.0.0-dev13

I second that. Many thanks for this explanation.
by BertB
10 Jan 2018, 17:59
Forum: ESP Easy: General Discussion
Topic: ESPEasy v2.0.0-dev13
Replies: 39
Views: 15046

Re: ESPEasy v2.0.0-dev13

So, if I understand correctly, I can continue using the V2 versions.
V2 contains all the goodies developed in mega ... correct?

Thanks for explaining
by BertB
10 Jan 2018, 17:38
Forum: ESP Easy: General Discussion
Topic: ESPEasy v2.0.0-dev13
Replies: 39
Views: 15046

Re: ESPEasy v2.0.0-dev13

Maybe a very stupid question, but ... what is the difference between V2.0.13 etc and a mega release?
I thought mega releases were no longer made?
by BertB
07 Jan 2018, 14:29
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

To avoid the errno 2 message, I created a main.py file, containing:
import upyeasy
upyeasy.main()

Is this the way to go?
by BertB
07 Jan 2018, 14:27
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

Hi Lisa, Thanks to your new Post 1, I got much farther, but there are still issues: First I did an erase flash, then D:\Tools\uPython>esptool.py --port COM5 write_flash --compress 0x1000 D:\Tools\uPython\upyeasy-esp32\upyeasy_v53.bin When I try to enable WIFI, I get: >>> upyeasy.setwifi(xxxxx','yyy...
by BertB
07 Jan 2018, 14:26
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

this is weird ... an hour or so later, I restarted the Putty terminal into the ESP32 and tried upyeasy.setwifi again. it was not found, so I imported it again. upyeasy.setwifi('xxxx','yyyyyyy') Traceback (most recent call last): File "<stdin>", line 1, in <module> File "upyeasy/__init__.py", line 2...
by BertB
07 Jan 2018, 12:45
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

this is weird ... an hour or so later, I restarted the Putty terminal into the ESP32 and tried upyeasy.setwifi again. it was not found, so I imported it again. upyeasy.setwifi('xxxx','yyyyyyy') Traceback (most recent call last): File "<stdin>", line 1, in <module> File "upyeasy/__init__.py", line 29...
by BertB
07 Jan 2018, 11:52
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

Hi Lisa, Thanks to your new Post 1, I got much farther, but there are still issues: First I did an erase flash, then D:\Tools\uPython>esptool.py --port COM5 write_flash --compress 0x1000 D:\Tools\uPython\upyeasy-esp32\upyeasy_v53.bin This gave the following result: ets Jun 8 2016 00:22:57 rst:0x1 (P...
by BertB
06 Jan 2018, 21:37
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

where can I find this upyeasy-32.bin
by BertB
06 Jan 2018, 20:23
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

I managed to get something running on a ESP32 board with OLED. If you want to play with the OLED, SSD1306 support is builtin, here's some code to do that: # Oled ESP32 import machine pin16 = machine.Pin(16, machine.Pin.OUT) pin16.value(1) import machine, ssd1306 i2c = machine.I2C(scl=machine.Pin(15...
by BertB
06 Jan 2018, 19:42
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

Forget about the last remark. It was the auto echo of termite
by BertB
06 Jan 2018, 19:41
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

The board only echoes what I type
by BertB
06 Jan 2018, 19:39
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

>>> import upyeasy
import upyeasyupyeasy.main()
upyeasy.main()

is what I get
by BertB
06 Jan 2018, 19:37
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

With first post, you mean here:
http://www.letscontrolit.com/forum/view ... =22&t=3906

Result is the same ...
by BertB
06 Jan 2018, 18:43
Forum: uPyEasy: Hardware
Topic: ESP32 boards
Replies: 277
Views: 81492

Re: ESP32 boards

Hi Lisa, I managed to get something running on a ESP32 board with OLED. This is what CMD window showed: D:\Tools\uPython>esptool.py -p COM5 --baud 115200 write_flash --compress 0x1000 D:\Tools\uPython\upyeasy-esp32\firmware.bin esptool.py v2.3-dev Connecting........_____....._ Detecting chip type......
by BertB
03 Dec 2017, 15:58
Forum: ESP Easy: Software
Topic: KRACK vulnerability
Replies: 16
Views: 5396

Re: KRACK vulnerability

Hi all, I just tried the new 2.4.0rc2 Arduino library as it has the latest WPA2 "Krack" vulnerability fixed. https://github.com/esp8266/Arduino/releases/tag/2.4.0-rc2 Good news: compiles and seems to run. Fast as lighning :D :D :D They changed the TCP acknowledge behaviour which makes the ESP consi...
by BertB
19 Nov 2017, 12:59
Forum: uPyEasy: General Discussion
Topic: uPyEasy
Replies: 132
Views: 61117

Re: uPyEasy

So far, I cannot find Armbian for Raspberry.
Sure, I am willing to try uPyEasy on a Zero.
Provided you have some kind of howto for me.
by BertB
17 Nov 2017, 22:51
Forum: uPyEasy: General Discussion
Topic: uPyEasy
Replies: 132
Views: 61117

Re: uPyEasy

Doesn't matter, because i don't care if it's a Raspberry or Orange. uPyEasy is running on Armbian and if the Raspberry is running Armbian, it's going to run there also (probably since it can't test it). Are you running Raspberry Pi Zero - Armbian? If so, are you willing to test it? ;) Cheers, Lisa ...
by BertB
15 Nov 2017, 15:25
Forum: uPyEasy: General Discussion
Topic: uPyEasy
Replies: 132
Views: 61117

Re: uPyEasy

My zero has onboard wifi and bluetooth and had a price of 11 euro.
by BertB
15 Nov 2017, 12:49
Forum: uPyEasy: General Discussion
Topic: uPyEasy
Replies: 132
Views: 61117

Re: uPyEasy

Is the Orange pi zero better than the Raspberry pi zero?
by BertB
06 Nov 2017, 19:49
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 482
Views: 142895

Re: Nextion display plugin

Under Tough Release Event of down: va0.val-- if(va0.val<0) { va0.val=0 } cov va0.val,t3.txt,0 print "|u,i230,n,s" print t3.txt printh 0a Under Tough Release Event of b0: va0.val++ if(va0.val>30) { va0.val=30 } cov va0.val,t3.txt,0 print "|u,i230,n,s" print t3.txt printh 0a Hi ! This will increase o...
by BertB
01 Nov 2017, 13:45
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 482
Views: 142895

Re: Nextion display plugin

I am having issues to get sliders running, some how the data looses its first chars. .... I prefer node red and mqtt route, as you could change the status of a button based on incoming msg. So when the lights are set on thru a rocker, the status on the nextion screen will be updated. I would prefer...
by BertB
01 Nov 2017, 13:17
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 482
Views: 142895

Re: Nextion display plugin

This is how you celebrate your first success with this http://support.iteadstudio.com/support/discussions/topics/11000008495/page/2?url_locale= contributor to Dave A "Steve, thanks very much for your help. " etc .. So at least the display works (I thought it was necessary to break it). Perhaps the ...
by BertB
28 Oct 2017, 19:05
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 482
Views: 142895

Re: Nextion display plugin

Difficult to test then.
by BertB
28 Oct 2017, 18:40
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 482
Views: 142895

Re: Nextion display plugin

How did you program the Display with USB to serial?
by BertB
28 Oct 2017, 18:14
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 482
Views: 142895

Re: Nextion display plugin

Are you sure the baudrate is set ok?
Did you for instance test it with a USB to serial converter and Nextion Editor to send it the text you want?
by BertB
28 Oct 2017, 17:27
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 482
Views: 142895

Re: Nextion display plugin

Hi.
I am not sure the plugin also works with the enhanced models, but first you need to prepare the display, so that it contains text and number objects.
There are many tutorials on the web that sohw how to do that. Especially the tutorials with Arduino are useful.
by BertB
22 Oct 2017, 14:48
Forum: uPyEasy: General Discussion
Topic: uPyEasy
Replies: 132
Views: 61117

Re: uPyEasy

It sure does.
by BertB
22 Oct 2017, 09:40
Forum: uPyEasy: General Discussion
Topic: uPyEasy
Replies: 132
Views: 61117

Re: uPyEasy

Thank you LisaM.
Do you think there will be room for something as easy as Rules?
I can imagine scripting is much more powerfull, but it looks like learning a new complex-ish language.
by BertB
21 Oct 2017, 13:54
Forum: uPyEasy: General Discussion
Topic: uPyEasy
Replies: 132
Views: 61117

Re: uPyEasy

+1
by BertB
21 Oct 2017, 12:27
Forum: uPyEasy: General Discussion
Topic: uPyEasy
Replies: 132
Views: 61117

Re: uPyEasy

This is a realy great development. But, I wonder how Easy it will be in the end to setup and use. I also wonder how 'high speed' or 'real time' modules are handled. And how portable modules will be across the various platforms. Will it be possible to develop a DS1820 module that can be uses on all p...
by BertB
19 Oct 2017, 19:53
Forum: ESP Easy: General Discussion
Topic: config and rules lost
Replies: 3
Views: 1180

Re: config and rules lost

:oops:
You are right.


Thanks
by BertB
18 Oct 2017, 18:56
Forum: ESP Easy: General Discussion
Topic: config and rules lost
Replies: 3
Views: 1180

config and rules lost

After updating two of my ESP's from ESPEasy_v2.0.0-dev11 to ESPEasy_v2.0.0-dev12 with the latest commit b073379, I lost all settings and rules. Was that to be expected? With the serial interface connected I saw during first reboot the following. INIT : Booting version: (custom) INIT : Warm boot #1 F...
by BertB
22 Sep 2017, 17:41
Forum: Staff Announcements forum
Topic: ESP Easy development status
Replies: 143
Views: 61643

Re: ESP Easy development status

I also have a few sonoff module's i don't want to lose, it's in my own interest to keep supporting smaller soc's... 8-) That's always the best warranty ... :-) Okay, I am kind of convinced. But, what does it do with the speed of the ESP? In the end, uPython is an interpreter language no? Like good ...
by BertB
19 Sep 2017, 19:50
Forum: Staff Announcements forum
Topic: ESP Easy development status
Replies: 143
Views: 61643

Re: ESP Easy development status

And... nobody is forcing you to use it. :mrgreen: [/quote] Now this is not necessarily true, is it? I mean, it is often so that development on older technologies grinds to a halt, when a new development gains in popularity. I do not need the muscle power to swich a light or to tell me the temperatu...
by BertB
19 Sep 2017, 15:44
Forum: Staff Announcements forum
Topic: ESP Easy development status
Replies: 143
Views: 61643

Re: ESP Easy development status

+1 for the first part.